{
 "generated": "2026-08-31",
 "note": "厂商中英对译表合并; 英文为厂商原文, 未做任何改写或润色 (含原表的拼写错误)",
 "sources": [
  {
   "path": "/Volumes/BIG/风电数据/01_场站SCADA/如东/rudong_work_00_raw/如东风场数据/工作/鲁能东台西门子4.0风机故障代码中英文对译表(1).xlsx",
   "sheets": [
    "Sheet1",
    "Sheet2"
   ],
   "tag": "luneng_dongtai_bilingual"
  },
  {
   "path": "/Volumes/BIG/风电数据/01_场站SCADA/如东/如东风场数据/西门子4.0技术资料/4MW西门子风机故障代码翻译.xlsx",
   "sheets": [
    "alarm",
    "event"
   ],
   "tag": "swt4mw_fault_translation"
  }
 ],
 "n_terms": 3834,
 "terms": {
  "系统无故障": {
   "en": "System faultless",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "频率滤波器编号>最大值": {
   "en": "No. of frequence filters > Max",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "No. of freq. filters > Max"
   ],
   "repaired": false
  },
  "模拟滤波器编号>最大值": {
   "en": "No. of analog filters > Max",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "频率滤波器未安装": {
   "en": "frequence filter not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Freq. filter not installed"
   ],
   "repaired": false
  },
  "模拟滤波器未安装": {
   "en": "Analog filter not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "间隔定时器编号>最大值": {
   "en": "No. of interval-timers > Max",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "定时器未安装": {
   "en": "Timer not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多安装进程标记": {
   "en": "Too many Install Tick Process",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "同步触发故障": {
   "en": "Trigger synchronzationhronization error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trigger synchronization error"
   ],
   "repaired": false
  },
  "平均值最大风机号": {
   "en": "Max no. of mean values",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "求平均值未安装": {
   "en": "Averaging not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "计划处理时间>最大值": {
   "en": "Schedule processing time > Max",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "进程计划编号>最大值": {
   "en": "Schedule no.of processes > Max",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "语言参数无效": {
   "en": "Language parameter invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风机型号无效": {
   "en": "Turbine type invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "事件计数器未安装": {
   "en": "Eventcounter not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "未安装故障": {
   "en": "Error not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "参数未安装": {
   "en": "Parameter not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "输入服务": {
   "en": "Input Service",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "刹车定义故障": {
   "en": "Brake definition error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "软件故障": {
   "en": "Software error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "故障日志溢出": {
   "en": "Faillog overflow",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "系统故障测试": {
   "en": "SysFail Test",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "安全链故障停机": {
   "en": "Safety related stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "手动停机": {
   "en": "Manual stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "远程停机": {
   "en": "Remote stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "紧急开关激活": {
   "en": "Emergency switch activated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "emergencygency switch activated"
   ],
   "repaired": true
  },
  "外部停机": {
   "en": "External stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "有效性-风速低": {
   "en": "Availability-low wind",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Availability - low wind"
   ],
   "repaired": false
  },
  "降容停机": {
   "en": "Power reduction stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "远程停机-业主": {
   "en": "Remote stop-Owner",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Remote stop - Owner"
   ],
   "repaired": false
  },
  "远程停机-西门子": {
   "en": "Remote stop-Siemens",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Remote stop - Siemens"
   ],
   "repaired": false
  },
  "远程停机-自动": {
   "en": "Remote stop-Automatic",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Remote stop - Automatic"
   ],
   "repaired": false
  },
  "塔筒紧停开关故障": {
   "en": "Tower emergency contact. err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Tower emergencygency Contactor err"
   ],
   "repaired": true
  },
  "机舱紧急接触 故障": {
   "en": "Nacelle emergencygency Contactor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航限制传感器激活": {
   "en": "Yaw limit sensor activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "其他小时数计数器有效": {
   "en": "Other hours counter active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "软件更新停机": {
   "en": "Stopped for SW update",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "手动空转停机": {
   "en": "Manual idle stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "远程停机振动停机": {
   "en": "Remote stop M-system",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "远程停机维护": {
   "en": "Remote stop Service",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "由于功率提升延迟引起的停机": {
   "en": "Stopped due to power up delay",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用电源停止": {
   "en": "Backup power stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在本地操作中的风机": {
   "en": "Turbine in local operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "业主手动停机": {
   "en": "Manual stop owner",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "本地，例行维护": {
   "en": "Local, scheduled service work",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "本地，临时/维修": {
   "en": "Local, ad-hoc / repair work",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "本地，客户/客人访问": {
   "en": "Local, customer / guest visit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "手动空转停机-偏航": {
   "en": "Manual idle stop-yawing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Manual idle stop - yawing"
   ],
   "repaired": false
  },
  "手动停机-偏航": {
   "en": "Manual stop-yawing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "警告：运行时间超时": {
   "en": "Warning: Operation timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停机：运行时间超时": {
   "en": "Stopped: Operation timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱温度过高": {
   "en": "Nacelle temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "振动传感器触发": {
   "en": "Vibration sensor activated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationation sensor activated"
   ],
   "repaired": true
  },
  "G传感器触发": {
   "en": "G sensor activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM模块报警": {
   "en": "TCM module alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "环境温度传感器故障": {
   "en": "Ambient temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Ambienttemp. sensor error"
   ],
   "repaired": false
  },
  "机舱温度传感器故障": {
   "en": "Nacelle temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nacelle temp. sensor error"
   ],
   "repaired": false
  },
  "启动失败": {
   "en": "Startup failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "切出故障": {
   "en": "Cut-out failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒风扇过热保护": {
   "en": "Tower fan superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "环境温度太高": {
   "en": "Ambient temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "环境温度太低": {
   "en": "Ambient temperature too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "有人闯入警告": {
   "en": "Intruder warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风机振动停机": {
   "en": "Turbine stopped by vibration",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Turbine stopped by vibrationation"
   ],
   "repaired": true
  },
  "风机振动降容": {
   "en": "Power reduced by vibrations",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Power reduced by vibrationations"
   ],
   "repaired": true
  },
  "塔筒强烈振动（SS），停机": {
   "en": "Strong Twr. Vib. (SS), stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒强烈振动（FA）,停机": {
   "en": "Strong Twr. Vib. (FA), stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒通风故障": {
   "en": "Tower vent. TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GS滤波器3引起的振动报警": {
   "en": "Vibrations alarm by GS filt 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations alarm by GS filt 3"
   ],
   "repaired": true
  },
  "GS滤波器4引起的振动报警": {
   "en": "Vibrations alarm by GS filt 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations alarm by GS filt 4"
   ],
   "repaired": true
  },
  "GS滤波器5引起的振动报警": {
   "en": "Vibrations warn by GS filt 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations warn  by GS filt 5"
   ],
   "repaired": true
  },
  "GS滤波器6引起的振动报警": {
   "en": "Vibrations warn by GS filt 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations warn  by GS filt 6"
   ],
   "repaired": true
  },
  "GS滤波器7引起的振动报警": {
   "en": "Vibrations warn by GS filt 7",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations warn  by GS filt 7"
   ],
   "repaired": true
  },
  "GS滤波器8引起的振动报警": {
   "en": "Vibrations warn by GS filt 8",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations warn  by GS filt 8"
   ],
   "repaired": true
  },
  "振动故障降容": {
   "en": "Power reduced by vibration err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Power reduced by vibrationation err"
   ],
   "repaired": true
  },
  "最大转速等待时间超时": {
   "en": "Max WaitForRPM time exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱前面温度传感器故障": {
   "en": "Nacelle temperature front sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nacelle temp. front sensor err"
   ],
   "repaired": false
  },
  "主缆环境温度传感器故障": {
   "en": "Main cable amain bearing temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main cable amb. temp sens. err"
   ],
   "repaired": false
  },
  "机舱前面温度太高": {
   "en": "Nacelle temperature front too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nacelle temp. front too high"
   ],
   "repaired": false
  },
  "主缆环境温度太高": {
   "en": "Main cable amain bearing temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main cable amb. temp. too high"
   ],
   "repaired": false
  },
  "GS2滤波器1引起的振动报警": {
   "en": "Vibrations alarm by GS2 filt 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations alarm by GS2 filt 1"
   ],
   "repaired": true
  },
  "GS2滤波器t2引起的振动报警": {
   "en": "Vibrations alarm by GS2 filt 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "vibrationations alarm by GS2 filt 2"
   ],
   "repaired": true
  },
  "G传感器类型不支持": {
   "en": "GSensor type not supported",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "G传感器转换超时": {
   "en": "GSensor transducer timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "环境温度-有效性": {
   "en": "Ambient temp-availability",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Ambient temp - availability"
   ],
   "repaired": false
  },
  "机舱冷却风扇1TOR故障": {
   "en": "Nacelle cool fan 1 TOR error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱冷却风扇2TOR故障": {
   "en": "Nacelle cool fan 2 TOR error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒振动，等待": {
   "en": "Tower vibration, waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Tower vibrationation, waiting"
   ],
   "repaired": true
  },
  "塔筒振动，停机": {
   "en": "Tower vibration, stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Tower vibrationation, stopped"
   ],
   "repaired": true
  },
  "叶片振动，等待": {
   "en": "Blade vibration, waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Blade vibrationation, waiting"
   ],
   "repaired": true
  },
  "叶片振动，停机": {
   "en": "Blade vibration, stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Blade vibrationation, stopped"
   ],
   "repaired": true
  },
  "振动降容，等待": {
   "en": "Power reduced by vib, waiting",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "振动降容，停机": {
   "en": "Power reduced by vib, stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱振动，等待": {
   "en": "Cabin vibration, waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Cabin vibrationation, waiting"
   ],
   "repaired": true
  },
  "机舱振动，停机": {
   "en": "Cabin vibration, stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Cabin vibrationation, stopped"
   ],
   "repaired": true
  },
  "检测到塔筒振动频率变化": {
   "en": "Tower frequence change detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Tower freq. change detected"
   ],
   "repaired": false
  },
  "塔筒振动SSD传感器报警": {
   "en": "Tower vib. SSD sensor alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "刹车测试停机": {
   "en": "Stop for Breaker test",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "增加配置错误": {
   "en": "Boost configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机过速": {
   "en": "Generator overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转速欠速，等待": {
   "en": "RPM red. too long EdgVib, wait",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转速欠速，停机": {
   "en": "RPM red. too long EdgVib, stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机每分钟转速在切入限制风扇围外": {
   "en": "Generator-RPM outside cut-in limits",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.-RPM outside cut-in limits"
   ],
   "repaired": false
  },
  "最大过速值": {
   "en": "Max overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风机没有准备好运行": {
   "en": "Turbine not rel. for operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机刹车故障切出": {
   "en": "Generator cut-out due to brake err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. cut-out due to brake err."
   ],
   "repaired": false
  },
  "发电机过载": {
   "en": "Overproduction on generator",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "最大功率跳跃": {
   "en": "Max power jump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机温度警告": {
   "en": "Generator temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机温度传感器故障 1U": {
   "en": "Generator temperaturesensor error 1U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 1U"
   ],
   "repaired": false
  },
  "发电机温度传感器故障 1V": {
   "en": "Generator temperaturesensor error 1V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 1V"
   ],
   "repaired": false
  },
  "发电机温度传感器故障 1W": {
   "en": "Generator temperaturesensor error 1W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 1W"
   ],
   "repaired": false
  },
  "发电机温度传感器故障 2U": {
   "en": "Generator temperaturesensor error 2U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 2U"
   ],
   "repaired": false
  },
  "发电机切出故障": {
   "en": "Generator cut-out err, main sWater out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. cut-out err, main sw. out"
   ],
   "repaired": false
  },
  "发电机温度传感器故障 2V": {
   "en": "Generator temperaturesensor error 2V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 2V"
   ],
   "repaired": false
  },
  "发电机温度传感器故障 2W": {
   "en": "Generator temperaturesensor error 2W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.sensor error 2W"
   ],
   "repaired": false
  },
  "发电机切出，温度": {
   "en": "Thermaincut-off on generator,tem",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Therm.cut-off on generator,tem"
   ],
   "repaired": false
  },
  "发电机过热切出": {
   "en": "Thermaincut-off on generator,the",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Therm.cut-off on generator,the"
   ],
   "repaired": false
  },
  "发电机轴承非驱动端温度错误": {
   "en": "Generator bearing (NDE) temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (NDE) temp. error"
   ],
   "repaired": false
  },
  "发电机轴承驱动端的温度错误": {
   "en": "Generator bearing (DE) temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (DE) temp. error"
   ],
   "repaired": false
  },
  "发电机轴承非驱动端温度传感器错误": {
   "en": "Generatorbearing temperaturesensor err. NDE",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.bear. temp.sensor err. NDE"
   ],
   "repaired": false
  },
  "发电机轴承驱动端温度传感器错误": {
   "en": "Generatorbearing temperaturesensor err. DE",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.bear. temp.sensor err. DE"
   ],
   "repaired": false
  },
  "无润滑，发电机，轴承": {
   "en": "No lubrication, Generator bearings",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "No lubrication, gen. bearings"
   ],
   "repaired": false
  },
  "油脂水平低，发电机，轴承": {
   "en": "Grease level low, Generatorbearings",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grease level low, gen.bearings"
   ],
   "repaired": false
  },
  "HCU超速": {
   "en": "Overspeed HCU",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "系列接触器错误": {
   "en": "Series contactor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "系列接触器漏码": {
   "en": "Series contactor drop-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "旁路接触器错误": {
   "en": "Bypass contactor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "旁路接触漏码": {
   "en": "Bypass contactor drop-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机温度传感器故障": {
   "en": "Generator temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp. sensor error"
   ],
   "repaired": false
  },
  "发电机轴承（NDE）温度警告": {
   "en": "Generator bearing (NDE) temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (NDE) temp. warn."
   ],
   "repaired": false
  },
  "发电机轴承（DE）的温度警告": {
   "en": "Generator bearing (DE) temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (DE) temp. warn."
   ],
   "repaired": false
  },
  "发电机轴承温度传感器警告.NDE": {
   "en": "Generator bear temperaturesensor warn.NDE",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear temp.sensor warn.NDE"
   ],
   "repaired": false
  },
  "发电机轴承温度传感器警告.DE": {
   "en": "Generator bear temperaturesensor warn.DE",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear temp.sensor warn.DE"
   ],
   "repaired": false
  },
  "冷却水压力过低": {
   "en": "Cooling water pressure too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "冷却水温度过高": {
   "en": "Cooling water temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cooling water temp. too high"
   ],
   "repaired": false
  },
  "发电机冷却器​​过热": {
   "en": "Generator cooler superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转子超速": {
   "en": "Rotor overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承（球）温度高": {
   "en": "Generator bearing (BALL) temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (BALL) temp. high"
   ],
   "repaired": false
  },
  "发电机轴承（球）温度传感器错误，球": {
   "en": "Generator bearingtemperaturesensor err. BALL",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear.temp.sens. err. BALL"
   ],
   "repaired": false
  },
  "发电机轴承（球）温度报警": {
   "en": "Generator bearing (BALL) temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear. (BALL) temp. warn."
   ],
   "repaired": false
  },
  "发电机轴承（球）温度传感器报警，球": {
   "en": "Generatorbear temperaturesensor warn.BALL",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.bear temp.sensor warn.BALL"
   ],
   "repaired": false
  },
  "太多的旁路接触器漏码": {
   "en": "Too many bypass conta.drop-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "功率峰值能量高": {
   "en": "Power peak energy to high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机冷却风扇电机热继错误": {
   "en": "Generator blower T.O.R error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "水冷散热器风扇电机热继错误": {
   "en": "Water Cooling Fan T.O.R error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转矩超限": {
   "en": "Torque arm limit reached",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机磁铁温度高": {
   "en": "Generator magnet temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator magnet temp. high"
   ],
   "repaired": false
  },
  "发电机磁铁温度过高": {
   "en": "Generat. magnet temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generat. magnet temp. too high"
   ],
   "repaired": false
  },
  "发电机磁铁温度传感器1 错误": {
   "en": "Generator magnet temperature sensor 1 err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. magnet temp. sensor 1 err"
   ],
   "repaired": false
  },
  "发电机磁铁温度传感器2 错误": {
   "en": "Generator magnet temperature sensor 2 err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. magnet temp. sensor 2 err"
   ],
   "repaired": false
  },
  "发电机保险丝熔断": {
   "en": "Generator fuse blown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机散热器TOR切出内部 M1": {
   "en": "Generator Cooler TOR cut-out Int M1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cooler TOR cut-out Int M1"
   ],
   "repaired": false
  },
  "发电机散热器TOR切出内部 M2": {
   "en": "Generator Cooler TOR cut-out Int M2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cooler TOR cut-out Int M2"
   ],
   "repaired": false
  },
  "发电机散热器TOR切出外部 M1": {
   "en": "Generator Cooler TOR cut-out Ext M1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cooler TOR cut-out Ext M1"
   ],
   "repaired": false
  },
  "发电机散热器TOR切出外部 M2": {
   "en": "Generator Cooler TOR cut-out Ext M2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cooler TOR cut-out Ext M2"
   ],
   "repaired": false
  },
  "内部发电机冷却器-错误": {
   "en": "Internal Generator Cooler-Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Internal Gen. Cooler - Error"
   ],
   "repaired": false
  },
  "外部发电机冷却器-错误": {
   "en": "External Generator Cooler-Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "External Gen. Cooler - Error"
   ],
   "repaired": false
  },
  "发电机断路器位置错误": {
   "en": "GeneratorBreaker position Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GeneratorBreaker Pos. Error"
   ],
   "repaired": false
  },
  "ARC传感器健康错误": {
   "en": "ARCSensor Healthy Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ARC传感器跳闸错误": {
   "en": "ARCSensor Tripped Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TOR发电机冷却剂泵-A": {
   "en": "TOR Generator coolant pump-A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR Generator coolant pump - A"
   ],
   "repaired": false
  },
  "TOR发电机冷却剂泵-B": {
   "en": "TOR Generator coolant pump-B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR Generator coolant pump - B"
   ],
   "repaired": false
  },
  "TOR发电机凉风扇A1&A2": {
   "en": "TOR Generator cool Fans A1&A2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TOR发电机凉风扇B1&B2": {
   "en": "TOR Generator cool Fans B1&B2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机冷却A-低压警告": {
   "en": "Generator Cool A-Low Pressure Warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cool A - Low Press. Warn."
   ],
   "repaired": false
  },
  "发电机冷却B-低压警告": {
   "en": "Generator Cool B-Low Pressure Warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Cool B - Low Press. Warn."
   ],
   "repaired": false
  },
  "发电机冷却A-液体低压": {
   "en": "GeneratorCool A-Liquid Low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool A - Liquid Low Press."
   ],
   "repaired": false
  },
  "发电机冷却B-液体低压": {
   "en": "GeneratorCool B-Liquid Low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool B - Liquid Low Press."
   ],
   "repaired": false
  },
  "发电机冷却A-压力传感器错误": {
   "en": "GeneratorCool A-Pressure Sensor Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool A - Press. Sensor Err"
   ],
   "repaired": false
  },
  "发电机冷却B-压力传感器错误": {
   "en": "GeneratorCool B-Pressure Sensor Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool B - Press. Sensor Err"
   ],
   "repaired": false
  },
  "发电机冷却A-液体温度警告": {
   "en": "GeneratorCool A-Liquid temperature Warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool A - Liquid Temp. Warn"
   ],
   "repaired": false
  },
  "发电机冷却B-液体温度警告": {
   "en": "GeneratorCool B-Liquid temperature Warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool B - Liquid Temp. Warn"
   ],
   "repaired": false
  },
  "发电机冷却A-液体温度错误": {
   "en": "GeneratorCool A-Liquid Temp Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool A - Liquid Temp Error"
   ],
   "repaired": false
  },
  "发电机冷却B-液体温度错误": {
   "en": "GeneratorCool B-Liquid Temp Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool B - Liquid Temp Error"
   ],
   "repaired": false
  },
  "发电机冷却A-温度传感器故障": {
   "en": "GeneratorCool A-Temp Sensor Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool A - Temp Sensor Error"
   ],
   "repaired": false
  },
  "发电机冷却B-温度传感器故障": {
   "en": "GeneratorCool B-Temp Sensor Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool B - Temp Sensor Error"
   ],
   "repaired": false
  },
  "发电机轴承（OR）温度高": {
   "en": "Generator bearing (OR) temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (OR) temp. high"
   ],
   "repaired": false
  },
  "发电机轴承（OR）温度传感器错误 （OR）": {
   "en": "Generator bearingtemperaturesensor err. (OR)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear.temp.sens. err. (OR)"
   ],
   "repaired": false
  },
  "发电机轴承（OR）温度传感器报警 （ OR）": {
   "en": "Generatorbear temperaturesensor warn.(OR)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.bear temp.sensor warn.(OR)"
   ],
   "repaired": false
  },
  "气隙过小错误": {
   "en": "Air Gap too small error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承（IR）温度错误": {
   "en": "Generator bearing (IR) temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (IR) temp. error"
   ],
   "repaired": false
  },
  "发电机轴承温度传感器错误IR": {
   "en": "Generatorbearing temperaturesensor err. IR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.bear. temp.sensor err. IR"
   ],
   "repaired": false
  },
  "发电机轴承(IR)温度警告": {
   "en": "Generator bearing (IR) temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bearing (IR) temp. warn."
   ],
   "repaired": false
  },
  "发电机轴承温度传感器警告IR": {
   "en": "Generator bear temperaturesensor warn.IR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear temp.sensor warn.IR"
   ],
   "repaired": false
  },
  "发电机轴承温度差异等待": {
   "en": "Generator bearing temp diff. waiting",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear. temp diff. waiting"
   ],
   "repaired": false
  },
  "发电机轴承温度差异停止": {
   "en": "Generator bearing temp diff. stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear. temp diff. stopped"
   ],
   "repaired": false
  },
  "发电机断路器1位置错误": {
   "en": "GeneratorBreaker 1 position Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GeneratorBreaker 1 Pos. Error"
   ],
   "repaired": false
  },
  "发电机断路器2位置错误": {
   "en": "GeneratorBreaker 2 position Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GeneratorBreaker 2 Pos. Error"
   ],
   "repaired": false
  },
  "永磁断路器切出错误": {
   "en": "PMG breaker cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "永磁断路器1切出错误": {
   "en": "PMG breaker 1 cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "永磁断路器2切出错误": {
   "en": "PMG breaker 2 cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机OVP 1损坏": {
   "en": "Generator OVP 1 worn out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机OVP 2损坏": {
   "en": "Generator OVP 2 worn out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "永磁断路器强制断开": {
   "en": "PMG-breaker forced out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承润滑不合理": {
   "en": "Generator bearing lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. bear. lub. not possible"
   ],
   "repaired": false
  },
  "发电机轴承油脂泵过热": {
   "en": "G.Bear grease pump superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TOR发电机冷却风扇1.1": {
   "en": "c. Gen cooling fan    1.1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.1"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇1.2": {
   "en": "TOR. Gen cooling fan    1.2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.2"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇1.3": {
   "en": "TOR. Gen cooling fan    1.3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.3"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇1.4": {
   "en": "TOR. Gen cooling fan    1.4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.4"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇2.1": {
   "en": "TOR. Gen cooling fan    2.1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.1"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇2.2": {
   "en": "TOR. Gen cooling fan    2.2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.2"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇2.3": {
   "en": "TOR. Gen cooling fan    2.3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.3"
   ],
   "repaired": false
  },
  "TOR发电机冷却风扇2.4": {
   "en": "TOR. Gen cooling fan    2.4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.4"
   ],
   "repaired": false
  },
  "tor水泵1": {
   "en": "TOR. Water pump 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "tor水泵2": {
   "en": "TOR. Water pump 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机冷却 1-液体温度误差": {
   "en": "GeneratorCool 1-Liquid Temp Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机冷却 1-温度传感器错误": {
   "en": "GeneratorCool 1-Temp Sensor Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 1 - Temp Sensor Error"
   ],
   "repaired": false
  },
  "发电机冷却 2-液体温度误差": {
   "en": "GeneratorCool 2-Liquid Temp Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 2 - Liquid Temp Error"
   ],
   "repaired": false
  },
  "发电机冷却 2-温度传感器错误": {
   "en": "GeneratorCool 2-Temp Sensor Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 2 - Temp Sensor Error"
   ],
   "repaired": false
  },
  "发电机冷却 1-液态低压": {
   "en": "GeneratorCool 1-Liquid Low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 1 - Liquid Low Press."
   ],
   "repaired": false
  },
  "发电机冷却 2-液态低压": {
   "en": "GeneratorCool 2-Liquid Low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 2 - Liquid Low Press."
   ],
   "repaired": false
  },
  "发电机冷却 1-压力传感器故障": {
   "en": "GeneratorCool 1-Pressure Sensor Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 1 - Press. Sensor Err"
   ],
   "repaired": false
  },
  "发电机冷却 2-压力传感器故障": {
   "en": "GeneratorCool 2-Pressure Sensor Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen.Cool 2 - Press. Sensor Err"
   ],
   "repaired": false
  },
  "发电机温度S01传感器错误": {
   "en": "Generator temperatureS01 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S01 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S02传感器错误": {
   "en": "Generator temperatureS02 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S02 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S03传感器错误": {
   "en": "Generator temperatureS03 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S03 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S04传感器错误": {
   "en": "Generator temperatureS04 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S04 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S05传感器错误": {
   "en": "Generator temperatureS05 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S05 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S06传感器错误": {
   "en": "Generator temperatureS06 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S06 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S07传感器错误": {
   "en": "Generator temperatureS07 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S07 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S08传感器错误": {
   "en": "Generator temperatureS08 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S08 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S09传感器错误": {
   "en": "Generator temperatureS09 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S09 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S10传感器错误": {
   "en": "Generator temperatureS10 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S10 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S11传感器错误": {
   "en": "Generator temperatureS11 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S11 sensor err"
   ],
   "repaired": false
  },
  "发电机温度S12传感器错误": {
   "en": "Generator temperatureS12 sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator temp.S12 sensor err"
   ],
   "repaired": false
  },
  "发电机前面板传感器错误": {
   "en": "Generator front plate sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. front plate sensor error"
   ],
   "repaired": false
  },
  "气隙传感器启动": {
   "en": "Air Gap sensor activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TOR发电机散热风扇1.5": {
   "en": "TOR. Gen cooling fan    1.5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.5"
   ],
   "repaired": false
  },
  "TOR发电机散热风扇1.6": {
   "en": "TOR. Gen cooling fan    1.6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 1.6"
   ],
   "repaired": false
  },
  "TOR发电机散热风扇2.5": {
   "en": "TOR. Gen cooling fan    2.5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.5"
   ],
   "repaired": false
  },
  "TOR发电机散热风扇2.6": {
   "en": "TOR. Gen cooling fan    2.6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR. Gen cooling fan 2.6"
   ],
   "repaired": false
  },
  "PMG内部空气温度传感器": {
   "en": "PMG Internal Air temp sensor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "没有有效的发电机温度传感器": {
   "en": "No valid generator temperature sensor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "No valid generator temp. sens."
   ],
   "repaired": false
  },
  "峰值能量降低功率警告": {
   "en": "Peak energy reduced power warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无效SpdPwr曲线进入": {
   "en": "Invalid SpdPwr curve entered",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无效的变桨版本选择": {
   "en": "Invalid pitch table selection",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂高温": {
   "en": "Temperature in hub high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：过载电流": {
   "en": "Hub: currentent overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Current overload"
   ],
   "repaired": false
  },
  "轮毂：叶片A阀错误": {
   "en": "Hub: Blade A valve error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片B阀错误": {
   "en": "Hub: Blade B valve error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片C阀错误": {
   "en": "Hub: Blade C valve error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片A上的编码器硬件错误": {
   "en": "Hub: Blade A encoder HW error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片B编码器硬件错误": {
   "en": "Hub: Blade B encoder HW error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片C编码硬件错误": {
   "en": "Hub: Blade C encoder HW error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：叶片A编码器通讯错误": {
   "en": "Hub: Blade A encoder Communicationerr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Blade A encoder comm.err."
   ],
   "repaired": false
  },
  "轮毂：叶片B编码器通讯错误": {
   "en": "Hub: Blade B encoder Communicationerr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Blade B encoder comm.err."
   ],
   "repaired": false
  },
  "轮毂：叶片c编码通讯错误": {
   "en": "Hub: Blade C encoder Communicationerr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Blade C encoder comm.err."
   ],
   "repaired": false
  },
  "无润滑，叶片A": {
   "en": "No lubrication, blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TwrFreq外部允许窗口": {
   "en": "TwrFreq outside allowed window",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，叶片B": {
   "en": "No lubrication, blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，叶片C": {
   "en": "No lubrication, blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "油脂水平低，轮毂": {
   "en": "Grease level low, hub",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂接触器错误": {
   "en": "Hub contactor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂温度传感器错误": {
   "en": "Hub temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨液压站压力低": {
   "en": "Pitch hydraulic low pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂压力开关错误": {
   "en": "Hub pressureswitch error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "运行中变桨A跟踪错误": {
   "en": "Pitch A tracking during operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch A tracking during opera."
   ],
   "repaired": false
  },
  "运行中变桨B跟踪错误": {
   "en": "Pitch B tracking during operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch B tracking during opera."
   ],
   "repaired": false
  },
  "运行中变桨C跟踪错误": {
   "en": "Pitch C tracking during operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch C tracking during opera."
   ],
   "repaired": false
  },
  "停机中变桨A跟踪错误": {
   "en": "Pitch A tracking during stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停机中变桨B跟踪错误": {
   "en": "Pitch B tracking during stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停机中变桨C跟踪错误": {
   "en": "Pitch C tracking during stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨润滑": {
   "en": "Pitch lubrication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch functionality check"
   ],
   "repaired": false
  },
  "叶片A停止位置反馈错误": {
   "en": "Blade A stoppositionfeedbackack error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade A stoppos.feedback error"
   ],
   "repaired": false
  },
  "叶片B停止位置反馈错误": {
   "en": "Blade B stoppositionfeedbackack error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade B stoppos.feedback error"
   ],
   "repaired": false
  },
  "叶片C停止位置反馈错误": {
   "en": "Blade C stoppositionfeedbackack error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade C stoppos.feedback error"
   ],
   "repaired": false
  },
  "叶片A停止位置反馈": {
   "en": "Blade A stopposition feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade A stopposition feedback"
   ],
   "repaired": false
  },
  "叶片B停止位置反馈": {
   "en": "Blade B stopposition feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade B stopposition feedback"
   ],
   "repaired": false
  },
  "叶片C停止位置反馈": {
   "en": "Blade C stopposition feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Blade C stopposition feedback"
   ],
   "repaired": false
  },
  "阀门支持电压太低": {
   "en": "Valve supplyvoltage too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM模块报警叶片A": {
   "en": "TCM module alarm blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM模块报警叶片B": {
   "en": "TCM module alarm blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM模块报警叶片C": {
   "en": "TCM module alarm blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：MTS传感器A无反馈": {
   "en": "Hub: No feedbackack MTS-sens A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No feedback MTS-sens A"
   ],
   "repaired": false
  },
  "轮毂：MTS传感器B无反馈": {
   "en": "Hub: No feedbackack MTS-sens B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No feedback MTS-sens B"
   ],
   "repaired": false
  },
  "轮毂：无反馈的MTS传感器 C": {
   "en": "Hub: No feedbackack MTS-sens C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No feedback MTS-sens C"
   ],
   "repaired": false
  },
  "轮毂： MTS传感器A干扰错误": {
   "en": "Hub: MTS-sens A noise Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂： MTS传感器B干扰错误": {
   "en": "Hub: MTS-sens B noise Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂： MTS传感器C干扰错误": {
   "en": "Hub: MTS-sens C noise Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂： MTS传感器A超出范围": {
   "en": "Hub: MTS-sens A out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂： MTS传感器B超出范围": {
   "en": "Hub: MTS-sens B out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂： MTS传感器C超出范围": {
   "en": "Hub: MTS-sens C out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂：无阀反馈A": {
   "en": "Hub: No Valve feedbackack A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No Valve Feedback A"
   ],
   "repaired": false
  },
  "轮毂：无阀反馈B": {
   "en": "Hub: No Valve feedbackack B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No Valve Feedback B"
   ],
   "repaired": false
  },
  "轮毂：无阀反馈C": {
   "en": "Hub: No Valve feedbackack C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: No Valve Feedback C"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值A电流 错误": {
   "en": "Hub: Valve feedback. A current. Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. A Curr. Err"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值B电流 错误": {
   "en": "Hub: Valve feedback. B current. Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. B Curr. Err"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值C电流 错误": {
   "en": "Hub: Valve feedback. C current. Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. C Curr. Err"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值A范围错误": {
   "en": "Hub: Valve feedback. A range Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. A range Err"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值 B范围的错误": {
   "en": "Hub: Valve feedback. B range Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. B range Err"
   ],
   "repaired": false
  },
  "轮毂：阀门反馈值 C范围内错误": {
   "en": "Hub: Valve feedback. C range Err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hub: Valve Feedb. C range Err"
   ],
   "repaired": false
  },
  "变桨锁 A传感器错误": {
   "en": "Pitch pawl A sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨锁 B传感器错误": {
   "en": "Pitch pawl B sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨锁 C传感器的错误": {
   "en": "Pitch pawl C sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨pawl A传感器警告": {
   "en": "Pitch pawl A sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨pawl B传感器报警": {
   "en": "Pitch pawl B sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨pawl C传感器的警告": {
   "en": "Pitch pawl C sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "压力传感器故障，叶片A": {
   "en": "Pressure sensor error, blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "压力传感器故障，叶片B": {
   "en": "Pressure sensor error, blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "压力传感器故障，叶片C": {
   "en": "Pressure sensor error, blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低油压，叶片A": {
   "en": "Low oil pressure, blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低油压，叶片B": {
   "en": "Low oil pressure, blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低油压，叶片C": {
   "en": "Low oil pressure, blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低油压，泵站": {
   "en": "Low oil pressure, pump station",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机速度振幅": {
   "en": "Oscillations in Generator speed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Oscillations in gen. speed"
   ],
   "repaired": false
  },
  "变桨位置测量误差": {
   "en": "Pitch position measurement error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pos. measurement error"
   ],
   "repaired": false
  },
  "蓄能器压力低": {
   "en": "Accumulator pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器A容量低": {
   "en": "Accumulator A capacity low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器B容量低": {
   "en": "Accumulator B capacity low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器C容量低": {
   "en": "Accumulator C capacity low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "常见停止位置反馈错误": {
   "en": "Common stop position feedbackack error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Common stoppos. feedback error"
   ],
   "repaired": false
  },
  "变桨锁A错误，蓄能器检查": {
   "en": "Pitch pawl A error, Accumulator check",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl A error, acc. check"
   ],
   "repaired": false
  },
  "变桨锁B错误，蓄能器检查": {
   "en": "Pitch pawl B error, Accumulator check",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl B error, acc. check"
   ],
   "repaired": false
  },
  "变桨锁C错误，蓄能器检查": {
   "en": "Pitch pawl C error, Accumulator check",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl C error, acc. check"
   ],
   "repaired": false
  },
  "变桨位置A测量误差": {
   "en": "Pitch position A measurement error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pos. A measurement error"
   ],
   "repaired": false
  },
  "变桨位置B测量误差": {
   "en": "Pitch position B measurement error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pos. B measurement error"
   ],
   "repaired": false
  },
  "变桨位置C测量误差": {
   "en": "Pitch position C measurement error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pos. C measurement error"
   ],
   "repaired": false
  },
  "蓄能器A检查：压力低": {
   "en": "Accumulator A check: pres low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器B检查：压力低": {
   "en": "Accumulator B check: pres low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器C检：压力低": {
   "en": "Accumulator C check: pres low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "方位差异大": {
   "en": "Azimuth difference to big",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "方位角校正中": {
   "en": "Azimuth is calibration",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Azimuth is calibrationg"
   ],
   "repaired": false
  },
  "叶片A边缘频率误差": {
   "en": "Edge Freq error on blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片B边缘频率误差": {
   "en": "Edge Freq error on blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片C边缘频率误差": {
   "en": "Edge Freq error on blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "VCU超速": {
   "en": "Overspeed VCU",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "定向停止-开始": {
   "en": "Orientation Stop-Started",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Orientation Stop -Started"
   ],
   "repaired": false
  },
  "定向停止-成功": {
   "en": "Orientation Stop-Succeeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Orientation Stop -Succeeded"
   ],
   "repaired": false
  },
  "定向停止-超出范围": {
   "en": "Orientation Stop-Out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Orientation Stop -Out of range"
   ],
   "repaired": false
  },
  "轮毂润滑不可能": {
   "en": "Hub lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "定向停止-失败": {
   "en": "Orientation Stop-Failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Orientation Stop -Failed"
   ],
   "repaired": false
  },
  "定向停止-转子归位": {
   "en": "Orientation Stop-Rotor in pos",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Orientation Stop -Rotor in pos"
   ],
   "repaired": false
  },
  "变桨pawlA反馈作业": {
   "en": "Pitch pawl A feedback. Operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl A Feedb. Operation"
   ],
   "repaired": false
  },
  "变桨pawlB反馈作业": {
   "en": "Pitch pawl B feedback. Operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl B Feedb. Operation"
   ],
   "repaired": false
  },
  "变桨pawlC反馈作业": {
   "en": "Pitch pawl C feedback. Operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl C Feedb. Operation"
   ],
   "repaired": false
  },
  "变桨pawlA反馈停止": {
   "en": "Pitch pawl A feedback. Stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl A Feedb. Stop"
   ],
   "repaired": false
  },
  "变桨pawlB反馈停止": {
   "en": "Pitch pawl B feedback. Stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl B Feedb. Stop"
   ],
   "repaired": false
  },
  "变桨pawlC反馈停止": {
   "en": "Pitch pawl C feedback. Stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl C Feedb. Stop"
   ],
   "repaired": false
  },
  "在轮毂维护期间高转速": {
   "en": "High RPM during hub service",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "油脂水平低，轮毂2": {
   "en": "Grease level low, hub 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂2润滑不可能": {
   "en": "Hub 2 lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "桨叶制动错误-无空转": {
   "en": "Pitch pawl error-No idling",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch pawl error - No idling"
   ],
   "repaired": false
  },
  "蓄能器容量A错误": {
   "en": "Accumulator capacity A error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器容量B错误": {
   "en": "Accumulator capacity B error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器容量C错误": {
   "en": "Accumulator capacity C error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "周期变桨叶片A校准错误": {
   "en": "circle pitch bladeA calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA calib err"
   ],
   "repaired": false
  },
  "周期变桨叶片A偏移错误": {
   "en": "circle pitch bladeA offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA offset err"
   ],
   "repaired": false
  },
  "周期变桨叶片A峰值错误": {
   "en": "circle pitch bladeA spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA spike err"
   ],
   "repaired": false
  },
  "周期变桨叶片A门错误": {
   "en": "circle pitch bladeA gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA gate err"
   ],
   "repaired": false
  },
  "周期变桨叶片B标定错误": {
   "en": "circle pitch bladeB calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB calib err"
   ],
   "repaired": false
  },
  "周期变桨叶片B偏移错误": {
   "en": "circle pitch bladeB offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB offset err"
   ],
   "repaired": false
  },
  "周期变桨叶片B峰值错误": {
   "en": "circle pitch bladeB spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB spike err"
   ],
   "repaired": false
  },
  "周期变桨叶片B门错误": {
   "en": "circle pitch bladeB gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB gate err"
   ],
   "repaired": false
  },
  "周期变桨叶片C标定错误": {
   "en": "circle pitch bladeC calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC calib err"
   ],
   "repaired": false
  },
  "周期变桨叶片C偏移错误": {
   "en": "circle pitch bladeC offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC offset err"
   ],
   "repaired": false
  },
  "周期变桨叶片C峰值错误": {
   "en": "circle pitch bladeC spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC spike err"
   ],
   "repaired": false
  },
  "周期变桨叶片C门错误": {
   "en": "circle pitch bladeC gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC gate err"
   ],
   "repaired": false
  },
  "循环变桨相电流错误": {
   "en": "circle pitch Phase cur err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Phase cur err"
   ],
   "repaired": false
  },
  "循环变桨最大负载叶片A": {
   "en": "circle pitch Max load blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade A"
   ],
   "repaired": false
  },
  "循环变桨最大负荷叶片B": {
   "en": "circle pitch Max load blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade B"
   ],
   "repaired": false
  },
  "循环变桨最大负荷叶片C": {
   "en": "circle pitch Max load blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade C"
   ],
   "repaired": false
  },
  "变桨启动错误叶片A": {
   "en": "Pitch startup error blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨启动错误叶片B": {
   "en": "Pitch startup error blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨启动错误叶片C": {
   "en": "Pitch startup error blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的变桨启动错误": {
   "en": "Too many pitch startup errors",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂风扇电源断开": {
   "en": "Hub fan supply disconnected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "错误变桨校准，叶片A": {
   "en": "Bad pitch calibration, blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "错误变桨校准，叶片B": {
   "en": "Bad pitch calibration, blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "错误变桨校准，叶片C": {
   "en": "Bad pitch calibration, blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂内部电路开路": {
   "en": "Hub internal circuit open",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器A检查：超时": {
   "en": "Accumulator A check: timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器B检查：超时": {
   "en": "Accumulator B check: timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "蓄能器C检查：超时": {
   "en": "Accumulator C check: timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "自动对p阀校准失败": {
   "en": "Automatic p-valve calibration failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Automatic p-valve calib failed"
   ],
   "repaired": false
  },
  "叶片A边缘频率警告": {
   "en": "Edge Freq warning on blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片B边缘频率警告": {
   "en": "Edge Freq warning on blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片C边缘频率警告": {
   "en": "Edge Freq warning on blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨表UP3601-3605无效": {
   "en": "Pitch table UP3601-3605 invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch tab. UP3601-3605 invalid"
   ],
   "repaired": false
  },
  "齿轮油温度低": {
   "en": "Gear oil temperature low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油温度警告": {
   "en": "Gear oil temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油温度高": {
   "en": "Gear oil temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高速轴发电机侧齿轮轴承温度警告": {
   "en": "HS-GEN gear bearing temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-GEN gearbear. temp warning"
   ],
   "repaired": false
  },
  "高速轴发电机侧齿轮轴承过热": {
   "en": "HS-GEN gear bearing superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-GEN Gearbearing superheated"
   ],
   "repaired": false
  },
  "高速轴轮毂侧齿轮轴承温度警告": {
   "en": "HS-ROT gear bearing temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-ROT gearbear. temp. warning"
   ],
   "repaired": false
  },
  "高速轴轮毂侧齿轮轴承过热": {
   "en": "HS-ROT gear bearing superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-ROT Gearbearing superheated"
   ],
   "repaired": false
  },
  "中间齿发电机侧齿轮轴承温度警告": {
   "en": "IMS-GEN gear bearing temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-GEN gearbear. temp warning"
   ],
   "repaired": false
  },
  "中间齿发电机侧齿轮轴承温度过高": {
   "en": "IMS-GEN gear bearing temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-GEN gearb. temp. too high"
   ],
   "repaired": false
  },
  "中间齿轮毂侧齿轮轴承温度警告": {
   "en": "IMS-ROT gear bearing temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-ROT gearbear. temp warning"
   ],
   "repaired": false
  },
  "中间齿轮毂侧齿轮轴承温度过高": {
   "en": "IMS-ROT gear bearing temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-ROT gearb. temp. too high"
   ],
   "repaired": false
  },
  "齿轮油压力过高/低": {
   "en": "Gear oil pressure too high/low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油位过低": {
   "en": "Gear oil level too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearoil level too low"
   ],
   "repaired": false
  },
  "齿轮轴承HS-GEN传感器错误": {
   "en": "gear bearing HS-GEN sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. HS-GEN sensor error"
   ],
   "repaired": false
  },
  "齿轮轴承HS-ROT传感器错误": {
   "en": "gear bearing HS-ROT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. HS-ROT sensor error"
   ],
   "repaired": false
  },
  "齿轮油温度传感器错误": {
   "en": "Gear oil temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearoil temp. sensor error"
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-GEN传感器错误": {
   "en": "gear bearing IMS-GEN sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. IMS-GEN sensor error"
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-ROT传感器错误": {
   "en": "gear bearing IMS-ROT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. IMS-ROT sensor error"
   ],
   "repaired": false
  },
  "齿轮油压力过低": {
   "en": "Gear oil pressure too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearoil pressure too low"
   ],
   "repaired": false
  },
  "齿轮油压力开关错误": {
   "en": "Gear oil pressureswitch error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearoil pressureswitch error"
   ],
   "repaired": false
  },
  "齿轮油金属检测": {
   "en": "Metal detected in gearoil",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮轴承HS-GEN传感器报警": {
   "en": "Gear bearing HS-GEN sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear bear. HS-GEN sensor warn."
   ],
   "repaired": false
  },
  "齿轮轴承HS-ROT传感器报警": {
   "en": "Gear bearing HS-ROT sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear bear. HS-ROT sensor warn."
   ],
   "repaired": false
  },
  "齿轮油温度传感器警告": {
   "en": "Gear oil temperature sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear oil temp. sensor warning"
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-GEN传感器报警": {
   "en": "Gear bearing IMS-GEN sensor war.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear bear. IMS-GEN sensor war."
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-ROT传感器报警": {
   "en": "Gear bearing IMS-ROT sensor war.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear bear. IMS-ROT sensor war."
   ],
   "repaired": false
  },
  "齿轮承载HS-GEN2传感器报警": {
   "en": "Gear bearing HS-GEN2 sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear bear. HS-GEN2 sens. warn."
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-GEN2传感器报警": {
   "en": "gear bearing IMS-GEN2 sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. IMS-GEN2 sens. warn."
   ],
   "repaired": false
  },
  "行星齿轮传感器报警": {
   "en": "Gear Planet sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮承载HS-GEN2传感器错误": {
   "en": "gear bearing HS-GEN2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. HS-GEN2 sens. error"
   ],
   "repaired": false
  },
  "齿轮轴承的IMS-GEN2传感器错误": {
   "en": "gear bearing IMS-GEN2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gearbear. IMS-GEN2 sens. error"
   ],
   "repaired": false
  },
  "行星齿轮传感器故障": {
   "en": "Gear planet sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "HS-GEN2齿轮轴承温度警告": {
   "en": "HS-GEN2 gear bearing temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-GEN2 gearbear. temp. warn."
   ],
   "repaired": false
  },
  "IMS-GEN2齿轮轴承温度警告": {
   "en": "IMS-GEN2 gear bearing temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-GEN2 gearbear. temp. warn."
   ],
   "repaired": false
  },
  "齿轮行星温度警告": {
   "en": "Gear Planet temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear Planet temp. warning"
   ],
   "repaired": false
  },
  "HS-GEN2齿轮轴承温度高": {
   "en": "HS-GEN2 gear bearing temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "HS-GEN2 gearbear. temp. high"
   ],
   "repaired": false
  },
  "IMS-GEN2齿轮轴承温度高": {
   "en": "IMS-GEN2 gear bearing temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IMS-GEN2 gearbear. temp. high"
   ],
   "repaired": false
  },
  "齿轮行星温度高": {
   "en": "Gear Planet temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear Planet temp. high"
   ],
   "repaired": false
  },
  "齿轮油压力传感器错误": {
   "en": "Gear oil pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear oil press sensor error"
   ],
   "repaired": false
  },
  "齿轮油泵 /风机过热": {
   "en": "Gearoilpump/blower superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油泵电机跳开": {
   "en": "Gear oil pump TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油冷却风扇电机跳开": {
   "en": "Gear oil blower TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "离线滤波器电机超温": {
   "en": "Offline filter motor superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Offlinefilter motor superheatd"
   ],
   "repaired": false
  },
  "在线滤波器警告": {
   "en": "Inline filter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在线滤波器的错误": {
   "en": "Inline filter error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油滤波器错误，离线": {
   "en": "GearOil filter error, Off-line",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "离线滤波器停止": {
   "en": "Offline filter stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "离线滤波器电机停止": {
   "en": "Offline filter motor stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Offlinefilter motor stopped"
   ],
   "repaired": false
  },
  "离线压力传感器错误": {
   "en": "Offline pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在线滤波器的安装错误": {
   "en": "Inline filter installation err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油离线过滤器压力低": {
   "en": "Gear Oil Filter low pressureOFFline",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GearOilFilter low pres.OFFline"
   ],
   "repaired": false
  },
  "旁路过滤器齿轮油压力高激活": {
   "en": "IdleV.active High gear oil press",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IdleV.act. High gear oil press"
   ],
   "repaired": false
  },
  "旁路过滤器齿轮油压力高未激活": {
   "en": "IdleV.inactiveHigh gear oil pres",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IdleV.inact.High gear oil pres"
   ],
   "repaired": false
  },
  "旁路过滤器齿轮油压力低未激活": {
   "en": "IdleV.inactiveLow gear oil press",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "IdleV.inact.Low gear oil press"
   ],
   "repaired": false
  },
  "齿轮油闲置过滤器堵塞": {
   "en": "Gear oil idle filter blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮运行在主动-停止": {
   "en": "Gear Run-in Active-Stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear Run-in Active - Stopped"
   ],
   "repaired": false
  },
  "齿轮运行在主动-限制": {
   "en": "Gear Run-in Active-Limiting",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "DG: Gear Run-in Active - Limit"
   ],
   "repaired": false
  },
  "海缆短路": {
   "en": "Seacable short circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "相序错误": {
   "en": "Phase sequence error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "触发同步错误": {
   "en": "Trigger synchronzation. Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trigger sync. Error"
   ],
   "repaired": false
  },
  "中压电缆短路": {
   "en": "MV-cable short circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "控制电压跌落": {
   "en": "Control voltage drop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超出正常电压上限": {
   "en": "Normal upper voltage exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超出正茬电压下限": {
   "en": "Normal lower voltage exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高超过上限电压": {
   "en": "High upper voltage exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低电压低超过": {
   "en": "Low lower voltage exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧电压>上限1": {
   "en": "Grid voltage>upper limit1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper limit1"
   ],
   "repaired": false
  },
  "网侧电压>上限2": {
   "en": "Grid voltage>upper limit2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper limit2"
   ],
   "repaired": false
  },
  "网侧电压>上限3": {
   "en": "Grid voltage>upper limit3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper limit3"
   ],
   "repaired": false
  },
  "网侧电压>上限4": {
   "en": "Grid voltage>upper limit4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper limit4"
   ],
   "repaired": false
  },
  "网侧电压>上限5": {
   "en": "Grid voltage>upper limit5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper limit5"
   ],
   "repaired": false
  },
  "网侧电压<下限1": {
   "en": "Grid voltage<lower limit1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit1"
   ],
   "repaired": false
  },
  "网侧电压<下限2": {
   "en": "Grid voltage<lower limit2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit2"
   ],
   "repaired": false
  },
  "网侧电压<下限3": {
   "en": "Grid voltage<lower limit3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit3"
   ],
   "repaired": false
  },
  "网侧电压<下限4": {
   "en": "Grid voltage<lower limit4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit4"
   ],
   "repaired": false
  },
  "网侧电压<下限5": {
   "en": "Grid voltage<lower limit5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit5"
   ],
   "repaired": false
  },
  "网侧电压<下限6": {
   "en": "Grid voltage<lower limit6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit6"
   ],
   "repaired": false
  },
  "网侧电压<下限7": {
   "en": "Grid voltage<lower limit7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit7"
   ],
   "repaired": false
  },
  "网侧电压<下限8": {
   "en": "Grid voltage<lower limit8",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit8"
   ],
   "repaired": false
  },
  "网侧电压<下限9": {
   "en": "Grid voltage<lower limit9",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit9"
   ],
   "repaired": false
  },
  "网侧电压<下限10": {
   "en": "Grid voltage<lower limit10",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit10"
   ],
   "repaired": false
  },
  "网侧电压<下限11": {
   "en": "Grid voltage<lower limit11",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit11"
   ],
   "repaired": false
  },
  "网侧电压<下限12": {
   "en": "Grid voltage<lower limit12",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower limit12"
   ],
   "repaired": false
  },
  "电网模块检测到FRT": {
   "en": "FRT detected by grid module",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧电压>启动上线": {
   "en": "Grid voltage>upper start limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper start limit"
   ],
   "repaired": false
  },
  "网侧电压<启动下线": {
   "en": "Grid voltage<lower start limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower start limit"
   ],
   "repaired": false
  },
  "MV断路器断开，由于电网": {
   "en": "MV breaker out, due to grid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多FRT激活": {
   "en": "Too many FRT activations",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧跌落测试激活": {
   "en": "Grid drop test active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧电压>HPPP上限": {
   "en": "Grid voltage>upper HPPP limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.>upper HPPP limit"
   ],
   "repaired": false
  },
  "网侧电压<HPPP下线": {
   "en": "Grid voltage<lower HPPP limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridvolt.<lower HPPP limit"
   ],
   "repaired": false
  },
  "干线频率过高": {
   "en": "Frequency on mains too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "干线频率太低": {
   "en": "Frequency on mains too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧频率>上限1": {
   "en": "Grid frequence>upper limit1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit1"
   ],
   "repaired": false
  },
  "网侧频率>上限2": {
   "en": "Grid frequence>upper limit2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit2"
   ],
   "repaired": false
  },
  "网侧频率>上限3": {
   "en": "Grid frequence>upper limit3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit3"
   ],
   "repaired": false
  },
  "网侧频率>上限4": {
   "en": "Grid frequence>upper limit4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit4"
   ],
   "repaired": false
  },
  "网侧频率>上限5": {
   "en": "Grid frequence>upper limit5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit5"
   ],
   "repaired": false
  },
  "网侧频率>上限6": {
   "en": "Grid frequence>upper limit6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper limit6"
   ],
   "repaired": false
  },
  "网侧频率<下限1": {
   "en": "Grid frequence<lower limit1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit1"
   ],
   "repaired": false
  },
  "网侧频率<下限2": {
   "en": "Grid frequence<lower limit2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit2"
   ],
   "repaired": false
  },
  "网侧频率<下限3": {
   "en": "Grid frequence<lower limit3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit3"
   ],
   "repaired": false
  },
  "网侧频率<下限4": {
   "en": "Grid frequence<lower limit4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit4"
   ],
   "repaired": false
  },
  "网侧频率<下限5": {
   "en": "Grid frequence<lower limit5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit5"
   ],
   "repaired": false
  },
  "网侧频率<下限6": {
   "en": "Grid frequence<lower limit6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit6"
   ],
   "repaired": false
  },
  "网侧频率<下限7": {
   "en": "Grid frequence<lower limit7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower limit7"
   ],
   "repaired": false
  },
  "网侧频率>启动上限": {
   "en": "Grid frequence>upper start limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper start limit"
   ],
   "repaired": false
  },
  "网侧频率<启动下限": {
   "en": "Grid frequence<lower start limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower start limit"
   ],
   "repaired": false
  },
  "网侧频>HPPP上限值": {
   "en": "Grid frequence>upper HPPP limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.>upper HPPP limit"
   ],
   "repaired": false
  },
  "网侧频<HPPP下限值": {
   "en": "Grid frequence<lower HPPP limit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gridfreq.<lower HPPP limit"
   ],
   "repaired": false
  },
  "不对称电流": {
   "en": "Asymmetry in currententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Asymmetry in current"
   ],
   "repaired": false
  },
  "不对称电流切入小型发电机": {
   "en": "Asymmetry currentent cut-in small Generator",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Asym. curr. cut-in small gen."
   ],
   "repaired": false
  },
  "不对称电流小，并网": {
   "en": "Asymmetry currentent small,on-grid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Asymmetry curr. small,on-grid"
   ],
   "repaired": false
  },
  "不对称电流 ，并网": {
   "en": "Asymmetry in currententent,on-grid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Asymmetry in current,on-grid"
   ],
   "repaired": false
  },
  "电流 symain错误-PFC切出": {
   "en": "currentent symain err.-PFC cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Current sym. err.- PFC cut-out"
   ],
   "repaired": false
  },
  "转速传感器故障": {
   "en": "RPM sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低速轴超速报警": {
   "en": "LMU alarm overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低速轴传感器错误": {
   "en": "LMU sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "SRSG速度不匹配": {
   "en": "SRSG speed mismatch",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "SRSG超速激活": {
   "en": "SRSG overspeed activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "SRSG activated"
   ],
   "repaired": false
  },
  "叶片载荷传感器冗余错误": {
   "en": "Blade load sensor redun. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片载荷传感器冗余警告": {
   "en": "Blade load sensor redun. warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无叶片载荷传感器的冗余": {
   "en": "No Blade Load sensor redundancy",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "DG: No Blade Load Sens. redun"
   ],
   "repaired": false
  },
  "叶片载荷传感器校准": {
   "en": "Blade load sensor calibration",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无效的叶片载荷传感器CFG": {
   "en": "Invalid blade load sensor cfg.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超过超速测试时间": {
   "en": "Overspeed test time exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "加速计算错误": {
   "en": "Acceleration calculation error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在RSA窗口的速度设定点": {
   "en": "Speed set point in RSA window",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片达到抵销限制极限": {
   "en": "Blade offset limit reached",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨液压过热": {
   "en": "hydraulic pressure superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitchhydraulics superheated"
   ],
   "repaired": false
  },
  "液压油位错误": {
   "en": "Hyd oil level error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压油温度错误": {
   "en": "Hyd oil temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压滤芯警告": {
   "en": "Hydraulic filter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压滤芯错误": {
   "en": "Hydraulic filter error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低变桨油的压力，开始": {
   "en": "Low pitch oil pressure, start",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨泵时间过长，停止": {
   "en": "Pitch pump. time too long,stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压传感器错误": {
   "en": "Hydraulic Pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hydraulic press. sensor error"
   ],
   "repaired": false
  },
  "液压油太冷": {
   "en": "Hydraulic oil too cold",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压油太热": {
   "en": "Hydraulic oil too hot",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压油温度传感器故障": {
   "en": "Hydraulic oil temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hyd. oil temp. sensor error"
   ],
   "repaired": false
  },
  "液压起重机/机舱盖激活": {
   "en": "Hydraulic for crane/cover activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hyd. for crane/cover activated"
   ],
   "repaired": false
  },
  "STATCOM错误": {
   "en": "Statcom error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动液压站压力低": {
   "en": "Brake Hydraulic station low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake hyd. station low press."
   ],
   "repaired": false
  },
  "制动液压油温度过高": {
   "en": "Brake Hydraulic oil temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake hyd. oil temp. high"
   ],
   "repaired": false
  },
  "制动液压油位错误": {
   "en": "Brake hyd oil level error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨液压冷却风扇电机跳开": {
   "en": "Pitch Hydrauliccool fan TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pitch hyd.cool fan TOR"
   ],
   "repaired": false
  },
  "液压滤芯，位置33发出警告": {
   "en": "Hydraulic filter,position 33 warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hydraulic filter,pos. 33 warn."
   ],
   "repaired": false
  },
  "液压滤芯，位置33错误": {
   "en": "Hydraulic filter,position 33 error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hydraulic filter,pos. 33 error"
   ],
   "repaired": false
  },
  "制动液压传感器错误": {
   "en": "Brake Hydraulic Pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake hyd. press. sensor error"
   ],
   "repaired": false
  },
  "制动液压 温度传感器错误": {
   "en": "Brake hydr. temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake hydr. temp. sens. error"
   ],
   "repaired": false
  },
  "偏航液压泵过热": {
   "en": "Yaw hydraulic pump superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航液压压力传感器错误": {
   "en": "Yaw Hydraulic pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw hyd. pressure sensor error"
   ],
   "repaired": false
  },
  "偏航液压油位低": {
   "en": "Yaw hydraulic oil level low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航液压 温度传感器错误": {
   "en": "Yaw hydr. temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw hydr. temp. sensor error"
   ],
   "repaired": false
  },
  "偏航液压油温度过高": {
   "en": "Yaw hydraulic oil temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw hydraulic oil temp. high"
   ],
   "repaired": false
  },
  "偏航液压滤芯警告": {
   "en": "Yaw hydraulic filter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动液压滤芯警告": {
   "en": "Brake hydraulic filter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压油温高的错误": {
   "en": "Hyd oil temp high error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "液压油太热开始": {
   "en": "Hydrolic oil too warm to start",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨泵1TOR错误": {
   "en": "TOR error on pitch pump 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨泵2TOR错误": {
   "en": "TOR error on pitch pump 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片开始安装": {
   "en": "Blade install commenced",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风速过高无法操作": {
   "en": "Windspeed too high to operate",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风速计错误": {
   "en": "Anemometer error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "二次风速计激活": {
   "en": "Secondary anemometer active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "二次风向标激活": {
   "en": "Secondary windvane active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风速计受阻， 手动重设": {
   "en": "Anemometer blocked, Man.Reset",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风速计受阻， 保持重设": {
   "en": "Anemometer blocked, Remain Reset",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Anemometer blocked, Rem.Reset"
   ],
   "repaired": false
  },
  "风速计错误手动作业": {
   "en": "Anemometer err. Man. operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用风速计警告": {
   "en": "Secondary anemometer warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用侧风速计故障": {
   "en": "Primary anemometer faulty",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT1超声波风速计错误": {
   "en": "FT1 Sonic wind sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT2超声波风速计错误": {
   "en": "FT2 Sonic wind sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT1超声波风速计通讯 错误": {
   "en": "FT1 Sonic wind sensor comm err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT2超声波风速计通讯 错误": {
   "en": "FT2 Sonic wind sensor comm err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT1配置错误": {
   "en": "FT1 Configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "FT2配置错误": {
   "en": "FT2 Configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "没有有效的风力数据": {
   "en": "No valid wind data",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转子转矩低": {
   "en": "Low torque rotor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "转子转矩低，手动复位": {
   "en": "Low torque rotor, Man. Reset",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "运行停止，由于WSS": {
   "en": "Operational stop due to WSS",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风速比较错误，结冰": {
   "en": "Wind speed compare err, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速<预期，结冰": {
   "en": "Primary Wind speed < expect, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Windspeed < expect, Icing"
   ],
   "repaired": false
  },
  "主风速能量<预期，结冰": {
   "en": "Primary Wind  energy < expect,Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Wind energy < expect,Icing"
   ],
   "repaired": false
  },
  "主风速仪风速范围错误，结冰": {
   "en": "Primary Wind speed Range err, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Windspeed Range err, Icing"
   ],
   "repaired": false
  },
  "次风速仪风速<预期，结冰": {
   "en": "Secondary Wind speed  < expect, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Windspeed < expect, Icing"
   ],
   "repaired": false
  },
  "次风速仪风能<预期，结冰": {
   "en": "Secondary Wind  energy < expect,Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Wind energy < expect,Icing"
   ],
   "repaired": false
  },
  "变桨泵3TOR错误": {
   "en": "TOR error on pitch pump 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "一次侧风向标受阻，结冰": {
   "en": "Primary Wind  vane blocked, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Wind vane blocked, Icing"
   ],
   "repaired": false
  },
  "二次风向标受阻，结冰": {
   "en": "Secondary Wind  vane blocked, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Wind vane blocked, Icing"
   ],
   "repaired": false
  },
  "风速比较错误": {
   "en": "Wind speed compare err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速仪风速<预期": {
   "en": "Primary Wind speed < expected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Windspeed < expected"
   ],
   "repaired": false
  },
  "主风速仪风能<预期": {
   "en": "Primary Wind  energy < expected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Wind energy < expected"
   ],
   "repaired": false
  },
  "主风速仪风速范围错误": {
   "en": "Primary Wind speed Range error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Windspeed Range error"
   ],
   "repaired": false
  },
  "次风速仪风速<预期": {
   "en": "Secondary Wind speed  < expected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Windspeed < expected"
   ],
   "repaired": false
  },
  "二次风能<预期": {
   "en": "Secondary Wind  energy < expected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Wind energy < expected"
   ],
   "repaired": false
  },
  "主风向标受阻": {
   "en": "Primary Wind  vane blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Pri.Wind vane blocked"
   ],
   "repaired": false
  },
  "次风向标受阻": {
   "en": "Secondary Wind  vane blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Wind vane blocked"
   ],
   "repaired": false
  },
  "初次FT传感器动荡错误": {
   "en": "Pri FT sensor turbulence error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "二次FT传感器动荡错误": {
   "en": "Sec FT sensor turbulence error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速仪速度估计误差差异": {
   "en": "Pri speed estimate diff error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "次风速仪速度估计误差差异": {
   "en": "Sec speed estimate diff error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速计强制启动": {
   "en": "Primain Anemometer forced active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Prim. Anemometer forced active"
   ],
   "repaired": false
  },
  "次风速计强制启动": {
   "en": "Secondary Anemometer forced active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec. Anemometer forced active"
   ],
   "repaired": false
  },
  "主风向标强制启动": {
   "en": "Primain Vane forced active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Prim. Vane forced active"
   ],
   "repaired": false
  },
  "次风向标强制启动": {
   "en": "Secondary Vane forced active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec. Vane forced active"
   ],
   "repaired": false
  },
  "主WS单元故障警告": {
   "en": "Primary WS unit failure warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "次WS单元故障警告": {
   "en": "Secondary WS unit failure warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主WS单位超出范围": {
   "en": "Primary WS unit out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "次WS单位超出范围": {
   "en": "Secondary WS unit out of range",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "许多风速计激活": {
   "en": "Many Anemometer activations",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "许多风向标激活": {
   "en": "Many Wind Vane activations",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速计故障": {
   "en": "Primary anemometer failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用风速仪结冰": {
   "en": "Ice on secondary instrument(s)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风向标失败": {
   "en": "Primary wind vane failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "次风速仪故障": {
   "en": "Secondary anemometer failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主风速仪低转子转矩": {
   "en": "Low torque rotor. Primary WSPEED",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque rotor. Pri. WSpeed"
   ],
   "repaired": false
  },
  "次风向标故障": {
   "en": "Secondary wind vane failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低扭矩转子一次侧W能": {
   "en": "Low torque rotor. Primary WEnergy",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque rotor. Pri. WEnergy"
   ],
   "repaired": false
  },
  "低支撑电压闪电检测": {
   "en": "Low suppltvoltage lightn. detec.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low suppltvolt. lightn. detec."
   ],
   "repaired": false
  },
  "闪电探测器激活": {
   "en": "Lightning detector activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Lightning detektor activated"
   ],
   "repaired": false
  },
  "最大叶片载荷湍流": {
   "en": "Max Blade load-High turbulence",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Max Blade load- High turbulence"
   ],
   "repaired": false
  },
  "机舱湿度高": {
   "en": "Nacelle humidity high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低扭矩转速二次风能": {
   "en": "Low torque rotor. Secondary WEnergy",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque rotor. Sec. WEnergy"
   ],
   "repaired": false
  },
  "次风速仪风速范围错误，结冰": {
   "en": "Secondary Wind speed  Range err, Icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Windspeed Range err, Icing"
   ],
   "repaired": false
  },
  "塔筒高湿度": {
   "en": "Tower humidity high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱湿度传感器错误": {
   "en": "Nacelle humidity sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒湿度传感器错误": {
   "en": "Tower humidity sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "能见度探测仪传感器错误": {
   "en": "Visibilitymeter sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停机，由于结冰": {
   "en": "Stopped, due to icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰严重": {
   "en": "Too much icing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高位震荡": {
   "en": "High turbulence",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰触发": {
   "en": "Ice has been detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "噪音远程停机": {
   "en": "Remote stop Noise",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "远程唤醒停止": {
   "en": "Remote stop Wake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低扭矩二次能量警告": {
   "en": "Low torque Secondary Energy warm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque Sec. Energy warm"
   ],
   "repaired": false
  },
  "次风速仪风速范围错误": {
   "en": "Secondary Wind speed  Range error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Sec.Windspeed Range error"
   ],
   "repaired": false
  },
  "飓风停机": {
   "en": "Stop for Hurricane condition",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低环境温度": {
   "en": "Availability Low Ambient Temp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高环境温度": {
   "en": "Availability High Ambient Temp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "延迟环境温度过低": {
   "en": "Delayed ambient temperature too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Delayed ambient temp. too low"
   ],
   "repaired": false
  },
  "远程停止：野生动物": {
   "en": "Remote stop Wildlife",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机湿度传感器错误": {
   "en": "Generator humidity sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. humidity sensor error"
   ],
   "repaired": false
  },
  "监控错误": {
   "en": "Contract: Error monitoring",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰停机-无偏航": {
   "en": "Ice stop-no yawing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Ice stop - no yawing"
   ],
   "repaired": false
  },
  "结冰检测：低转矩": {
   "en": "Ice detection: Low torque",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰检测：边缘频率": {
   "en": "Ice detection: Edge frequency",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低转矩，无冰（温度=标准）": {
   "en": "Low torque, no ice (Temp=Norm)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰检测IO配置错误": {
   "en": "Ice detection IO config. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "结冰检测：无切入": {
   "en": "Ice detection: No cut in",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "强风停止": {
   "en": "High Wind Stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低噪声停止": {
   "en": "Low Noise stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低噪声区3停止": {
   "en": "Low Noise zone 3 stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低噪声区3活跃": {
   "en": "Low Noise zone 3 active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "小型发电机不允许": {
   "en": "Small generator not allowed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM-CS行星轮振动增加": {
   "en": "TCM-CS vibration planet increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr planet increase"
   ],
   "repaired": false
  },
  "TCM-CS行星轮振动快速增加": {
   "en": "TCM-CS vibration planet high increaseea",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr planet high increa"
   ],
   "repaired": false
  },
  "TCM-CS IMS振动增加": {
   "en": "TCM-CS vibration IMS increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr IMS increase"
   ],
   "repaired": false
  },
  "TCM-CS IMS振动高增加": {
   "en": "TCM-CS vibration IMS high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr IMS high increase"
   ],
   "repaired": false
  },
  "TCM-CS HS振动增加": {
   "en": "TCM-CS vibration HS increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr HS increase"
   ],
   "repaired": false
  },
  "TCM-CS HS振动高增加": {
   "en": "TCM-CS vibration HS high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr HS high increase"
   ],
   "repaired": false
  },
  "TCM-CS发电机（ DE ）振动增加": {
   "en": "TCM-CS vibration gen(DE) increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr gen(DE) incr"
   ],
   "repaired": false
  },
  "TCM-CS发电机（ DE）振动高增加": {
   "en": "TCM-CS vibration gen(DE) high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr gen(DE) high incr"
   ],
   "repaired": false
  },
  "TCM-CS发电机（ NDE）振动增加": {
   "en": "TCM-CS vibration gen(NDE) increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr gen(NDE) incr"
   ],
   "repaired": false
  },
  "TCM-CS发电机（ NDE）振动高增加": {
   "en": "TCM-CS vibration gen(NDE) high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr gen(NDE) high incr"
   ],
   "repaired": false
  },
  "停止，变流器扇区": {
   "en": "Stopped, shade inConverterenience",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Stopped, shade inconvenience"
   ],
   "repaired": false
  },
  "阴影检测故障": {
   "en": "Shade detector fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM-CS MB振动的增加": {
   "en": "TCM-CS vibration MB increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr MB incr"
   ],
   "repaired": false
  },
  "g水平高": {
   "en": "G level high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM-CS MB振动高增加": {
   "en": "TCM-CS vibration MB high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-CS vibr MB high incr"
   ],
   "repaired": false
  },
  "TCM-VSMB （前）振动增加": {
   "en": "TCM-VS vibration MB(front) inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibration MB(front) high inc",
    "TCM-VS vibr MB(front) inc",
    "TCM-VS vibr MB(front) high inc"
   ],
   "repaired": false
  },
  "环境停机降容": {
   "en": "Stop environmental curtailment",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM-VSMB （后）振动增加": {
   "en": "TCM-VS vibration MB(rear) inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibration MB(rear) high inc",
    "TCM-VS vibr MB(rear) inc",
    "TCM-VS vibr MB(rear) high inc"
   ],
   "repaired": false
  },
  "TCM-VS行星轮振动增加": {
   "en": "TCM-VS vibration planet increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr planet incr"
   ],
   "repaired": false
  },
  "TCM-VS行星轮振动高增加": {
   "en": "TCM-VS vibration planet high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr planet high incr"
   ],
   "repaired": false
  },
  "TCM-VSIMS振动增加": {
   "en": "TCM-VS vibration IMS increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr IMS increase"
   ],
   "repaired": false
  },
  "TCM-VSIMS振动高增加": {
   "en": "TCM-VS vibration IMS high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr IMS high increase"
   ],
   "repaired": false
  },
  "TCM-VSHS （前）振动增加": {
   "en": "TCM-VS vibration HS(front) inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr HS(front) inc"
   ],
   "repaired": false
  },
  "TCM-VSHS （前） 振动增加": {
   "en": "TCM-VS vibration HS(front) high inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr HS(front) high inc"
   ],
   "repaired": false
  },
  "TCM-VS协（后）振动增加": {
   "en": "TCM-VS vibration HS(rear) inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr HS(rear) inc"
   ],
   "repaired": false
  },
  "TCM-VS协（后）振动高增加": {
   "en": "TCM-VS vibration HS(rear) high inc",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr HS(rear) high inc"
   ],
   "repaired": false
  },
  "TCM-VS发电机（ DE ）振动增加": {
   "en": "TCM-VS vibration gen(DE) increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr gen(DE) incr"
   ],
   "repaired": false
  },
  "TCM-VS发电机（ DE）振动高增加": {
   "en": "TCM-VS vibration gen(DE) high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr gen(DE) high incr"
   ],
   "repaired": false
  },
  "TCM-VS发电机（ NDE）振动增加": {
   "en": "TCM-VS vibration gen(NDE) increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr gen(NDE) incr"
   ],
   "repaired": false
  },
  "TCM-VS发电机（ NDE）振动高增加": {
   "en": "TCM-VS vibration gen(NDE) high increase",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TCM-VS vibr gen(NDE) high incr"
   ],
   "repaired": false
  },
  "TCM一般警告": {
   "en": "TCM General Warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TCM-未知的错误代码": {
   "en": "TCM-Unknown error code",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰激活（ downreg ）": {
   "en": "Blade de-icing active(downreg)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰激活（停止）": {
   "en": "Blade de-icing active (stop)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰活跃（空转）": {
   "en": "Blade de-icing active (idle)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰接触器A错误": {
   "en": "Blade de-icing contactor A err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰接触器B错误": {
   "en": "Blade de-icing contactor B err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰接触器C错误": {
   "en": "Blade de-icing contactor C err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰重试错误": {
   "en": "Blade de-icing retry error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超出制动时间": {
   "en": "Brake time exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高速轴刹车片太小": {
   "en": "HS Brake lining too small",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "HS制动错误-制动器释放": {
   "en": "HS brake error-Brake released",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "HS制动错误-刹车活跃": {
   "en": "HS brake error-Brake active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动器（ GEAR ）的温度错误": {
   "en": "Brake (GEAR) temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动器（ GEN ）温度错误": {
   "en": "Brake (GEN) temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动器（ GEAR ） 温度传感器错误": {
   "en": "Brake (GEAR) temperaturesensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake (GEAR) temp.sensor error"
   ],
   "repaired": false
  },
  "制动器（ GEN ） 温度传感器错误": {
   "en": "Brake (GEN) temperaturesensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake (GEN) temp.sensor error"
   ],
   "repaired": false
  },
  "液压泵启动过于频繁": {
   "en": "hyd starting too often",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hyd.pump starting too often"
   ],
   "repaired": false
  },
  "液压泵运行时间太长": {
   "en": "Hydraulic pumping time too long",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Hyd. pumping time too long"
   ],
   "repaired": false
  },
  "盘式制动泵过热": {
   "en": "Disc brake pump superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "警告，制动片磨损": {
   "en": "Warning, Brake lining worn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "最大激活-阀门位置 35": {
   "en": "Max activations-Valve pos 35",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Max activations - Valve pos 35"
   ],
   "repaired": false
  },
  "CAN总线通讯错误在制动信号": {
   "en": "CAN error on brake signals",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动压力传感器错误": {
   "en": "Brake pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "空转电路漏电": {
   "en": "Idle circuit leakage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "高速轴压力开关错误": {
   "en": "Pressure switch error HS",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动压力太低": {
   "en": "Brakepressure too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动压力过高": {
   "en": "Brake pressure too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "制动蓄能器压力传感器误差": {
   "en": "Brake Accumulator Pressure sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake acc. press. sensor error"
   ],
   "repaired": false
  },
  "制动蓄能器压力过低": {
   "en": "Brake Accumulator pressure too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Brake acc. pressure too low"
   ],
   "repaired": false
  },
  "偏航电机过热": {
   "en": "Yaw motor(s) superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航超过时间限制": {
   "en": "Yaw time limit exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多偏航方向错误": {
   "en": "Too many yawdirection errors",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航参数错误": {
   "en": "Yaw parameter error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw rounds value out of range"
   ],
   "repaired": false
  },
  "偏航位置传感器错误": {
   "en": "Yaw position sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停止，解缆电缆": {
   "en": "Stopped, untwisting cables",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，偏航系统": {
   "en": "No lubrication, yaw system",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "油脂水平低， 偏航系统": {
   "en": "Grease level low, yawsystem",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航系统故障": {
   "en": "Yaw system failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "风向标受阻": {
   "en": "Wind vane blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航电机高转速错误": {
   "en": "Yaw motor high speed error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的偏航电机错误": {
   "en": "Too many yaw motor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航电机分/负速度错误": {
   "en": "Yaw motor min/neg. speed error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰电阻丝A错误": {
   "en": "Blade de-icing res. A err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰电阻丝B错误": {
   "en": "Blade de-icing res. B err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "叶片除冰电阻丝 C错误": {
   "en": "Blade de-icing res. C err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航制动液压压力错误": {
   "en": "Yaw brake Hydraulic Pressure err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw brake hyd. press. err."
   ],
   "repaired": false
  },
  "偏航制动液压压力传感器错误": {
   "en": "Yaw brake Hydraulic press sens err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw brake hyd. press sens err."
   ],
   "repaired": false
  },
  "停下来，被迫偏航1圈": {
   "en": "Stopped, forced yawing 1 round",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，偏航轴承": {
   "en": "No lubrication, yaw bearing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "油脂水平低，偏航轴承": {
   "en": "Grease level low, yaw bearing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航变流器错误": {
   "en": "Yaw Converter error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw converter error"
   ],
   "repaired": false
  },
  "偏航齿轮的制动液压压力错误": {
   "en": "Yaw gear brake Hydraulic Pressure err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw gear brake hyd. press. err"
   ],
   "repaired": false
  },
  "偏航齿轮制动压力传感器错误": {
   "en": "Yaw gear brake press sens err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航方向错误": {
   "en": "Yaw direction error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航位置偏差高": {
   "en": "Yaw position deviation to high.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw pos. deviation to high."
   ],
   "repaired": false
  },
  "偏航制动位置到极限": {
   "en": "Yaw position brake limit reached.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw pos. brake limit reached."
   ],
   "repaired": false
  },
  "偏航变流器警告": {
   "en": "Yaw Converter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw converter warning"
   ],
   "repaired": false
  },
  "太多的偏航变流器警告": {
   "en": "Too many yaw Converter warnings",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Too many yaw conv. warnings"
   ],
   "repaired": false
  },
  "偏航制动器保险丝熔断": {
   "en": "Yaw brake fuse blown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "熔断偏航制动器熔断器": {
   "en": "Blown yaw brake fuse",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的偏航变流器错误": {
   "en": "Too many yaw Converter errors",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Too many yaw conv. errors"
   ],
   "repaired": false
  },
  "偏航位置偏差错误": {
   "en": "Yaw position deviation error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的偏航位置偏差的错误": {
   "en": "Too many yaw position dev. errors",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Too many yaw pos. dev. errors"
   ],
   "repaired": false
  },
  "偏航润滑不可能": {
   "en": "Yaw lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航轴承的润滑不可能": {
   "en": "Yaw bearing lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw bear. lub. not possible"
   ],
   "repaired": false
  },
  "偏航负荷控制警告": {
   "en": "Yaw Load control warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航载荷传感器报警": {
   "en": "Yaw Load sensor warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "强迫偏航SG校准传感器": {
   "en": "Forced yawing SG sensors calibration",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Forced yawing SG sensors calib"
   ],
   "repaired": false
  },
  "PFC RS485通讯错误": {
   "en": "PFC RS485 communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "PFC切出": {
   "en": "PFC cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的PFC切出": {
   "en": "Too many PFC cut-outs",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CBM模块报警": {
   "en": "CBM module alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "大量无功功率偏差": {
   "en": "Large reactive power deviation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "动态PFC 反馈错误": {
   "en": "Dynamic PFC feedbackack error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Dynamic PFC feedback error"
   ],
   "repaired": false
  },
  "太多的不对称性切出": {
   "en": "Too many asymmetry cut-outs",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电容温度过低": {
   "en": "Capacitor temperature too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器L1温度传感器警告": {
   "en": "Transformer L1 temperature sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transf. L1 temp. sensor warn."
   ],
   "repaired": false
  },
  "变压器L2温度传感器警告": {
   "en": "Transformer L2 temperature sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transf. L2 temp. sensor warn."
   ],
   "repaired": false
  },
  "变压器L3温度传感器警告": {
   "en": "Transformer L3 temperature sensor warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transf. L3 temp. sensor warn."
   ],
   "repaired": false
  },
  "变压器通风错误": {
   "en": "Transformer ventilation error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器温度警告": {
   "en": "Transformer temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transformer temp. warning"
   ],
   "repaired": false
  },
  "变压器温度误差": {
   "en": "Transformer temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主变压器故障": {
   "en": "Main transformer fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主变压器警告": {
   "en": "Main transformer warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器温度传感器故障": {
   "en": "Transformer temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transf. temp. sensor error"
   ],
   "repaired": false
  },
  "变压器油温警告": {
   "en": "Transformer oil temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. oil tempera. warning"
   ],
   "repaired": false
  },
  "变压器油温高": {
   "en": "Transformer oil temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. oil temperature high"
   ],
   "repaired": false
  },
  "变压器油位过低": {
   "en": "Transformer oil level too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器气体压力过高": {
   "en": "Transformer gas pressure too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfo. gas pressure too high"
   ],
   "repaired": false
  },
  "变压器室温度传感器错误": {
   "en": "Transformer room temperature sensor err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfo. room temp. sens. err."
   ],
   "repaired": false
  },
  "变压器油温度传感器错误": {
   "en": "Transformer oil temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. oil temp. sensor err"
   ],
   "repaired": false
  },
  "变压器油压压力警告": {
   "en": "Transformainoil pressure warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transform.oil pressure warning"
   ],
   "repaired": false
  },
  "变压器油压力高": {
   "en": "Transformer oil pressure high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器温度过高": {
   "en": "Transformer temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transformer temp. too high"
   ],
   "repaired": false
  },
  "变压器配置错误": {
   "en": "Transformer configuration err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器油压力过高": {
   "en": "Transformer oil pressure too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfo. oil pressure too high"
   ],
   "repaired": false
  },
  "变压器油的温度非常高": {
   "en": "Transformer oil temperature very high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trafo. oil temp. very high"
   ],
   "repaired": false
  },
  "偏航TOR警告（奇电机）": {
   "en": "Yaw TOR warning (Odd motors)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航警告TOR （偶马达）": {
   "en": "Yaw TOR warning (Even motors)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "偏航TOR错误-停止": {
   "en": "Yaw TOR error-Stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw TOR error - Stopped"
   ],
   "repaired": false
  },
  "偏航TOR 传感器错误 （单电机）": {
   "en": "Yaw TOR sensorerr.(Odd motors)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw TOR sens.err.(Odd motors)"
   ],
   "repaired": false
  },
  "偏航TOR 传感器错误 （偶马达）": {
   "en": "Yaw TOR sensorerr.(Even motors)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Yaw TOR sens.err.(Even motors)"
   ],
   "repaired": false
  },
  "变压器油压太低-可用性": {
   "en": "TransformerOilLevel too low-Availability",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TrafoOilLevel too low - Avail."
   ],
   "repaired": false
  },
  "变压器油压太高-可用性": {
   "en": "TransformerOilPres too high-Availability",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TrafoOilPres too high - Avail."
   ],
   "repaired": false
  },
  "变压器中水位太高": {
   "en": "Too high waterlevel in Transformer",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Too high waterlevel in Trafo"
   ],
   "repaired": false
  },
  "变压器压力释放错误": {
   "en": "Transformer Pressure Relief err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. Pressure Relief err."
   ],
   "repaired": false
  },
  "变压器跳闸": {
   "en": "Transformer tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器电池充电器故障": {
   "en": "Transformer battery charger fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trafo battery charger fault"
   ],
   "repaired": false
  },
  "一般变压报警": {
   "en": "General tranformer alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器温度1级警报": {
   "en": "Transformer temperature stage 1 alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. temp. stage 1 alarm"
   ],
   "repaired": false
  },
  "变压器温度阶段2个报警": {
   "en": "Transformer temperature stage 2 alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. temp. stage 2 alarm"
   ],
   "repaired": false
  },
  "变压器风扇1": {
   "en": "TOR transformer Fan1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器风扇2": {
   "en": "TOR transformer Fan2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器安全跳闸": {
   "en": "Transformer security tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器的门打开": {
   "en": "Transformer station door open",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器泄漏传感器1": {
   "en": "Transformer leakage sensor 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器泄漏传感器2": {
   "en": "Transformer leakage sensor 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器油出口温度警告": {
   "en": "Transformer oil outlet temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trafo oil outlet temp. warning"
   ],
   "repaired": false
  },
  "变压器油出口温度高": {
   "en": "Transformer oil outlet temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trafo oil outlet temp. high"
   ],
   "repaired": false
  },
  "变压器油出口温度传感器": {
   "en": "Transformer oil outlet temperature sensor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Trafo oil outlet temp. sensor"
   ],
   "repaired": false
  },
  "变压器油泵跳开": {
   "en": "TOR transformer oil pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器储油罐泄漏": {
   "en": "Transformer expansion tank leak",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Transfor. expansion tank leak"
   ],
   "repaired": false
  },
  "变压器油位警告": {
   "en": "Transformer oil level warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器参数写入警告": {
   "en": "Converter parameter write warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 1手动禁用": {
   "en": "Converter 1 disabled manually",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器通风电机跳开": {
   "en": "TOR Transformer ventilation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TOR transfor. ventilation"
   ],
   "repaired": false
  },
  "变流器 2手动禁用": {
   "en": "Converter 2 disabled manually",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 1模式选择错误": {
   "en": "Converter 1 Mode select error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 2模式选择错误": {
   "en": "Converter 2 Mode select error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 1跳闸": {
   "en": "Converter 1 tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 2跳闸": {
   "en": "Converter 2 tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器跳闸": {
   "en": "Grid Inverter tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid inverter tripped"
   ],
   "repaired": false
  },
  "发电机变频器跳闸": {
   "en": "Generator inverter tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器警告": {
   "en": "Grid Inverter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid inverter warning"
   ],
   "repaired": false
  },
  "发电机逆变器警告": {
   "en": "Generator inverter warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流电压低": {
   "en": "DC voltage low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器受阻": {
   "en": "Mainbreaker blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器切出": {
   "en": "Mainbreaker cut out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变频器启动时的错误": {
   "en": "Error during Inverter start",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器温度高": {
   "en": "Inverter temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器温度传感器故障": {
   "en": "Inverter temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inverter temp. sensor error"
   ],
   "repaired": false
  },
  "变压器岸堤满": {
   "en": "Transformer bunding full",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流保险丝熔断": {
   "en": "DC fuse blown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主电抗器温度高": {
   "en": "Main reactor Temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor Temperature high"
   ],
   "repaired": false
  },
  "主电抗器 U温度传感器错误": {
   "en": "Mainreactor U temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor U temp. sensor err"
   ],
   "repaired": false
  },
  "主电抗器 V温度传感器错误": {
   "en": "Mainreactor V temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor V temp. sensor err"
   ],
   "repaired": false
  },
  "主电抗器 W型温度传感器错误": {
   "en": "Mainreactor W temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor W temp. sensor err"
   ],
   "repaired": false
  },
  "主电抗器温度警告": {
   "en": "Mainreactor temperature warnnig",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor temp. warnnig"
   ],
   "repaired": false
  },
  "充电电路接触器错误": {
   "en": "Charging circuit contactor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "充电主断路器切出": {
   "en": "Charge main breaker cut out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器1 电阻温度（ B1 ）警告": {
   "en": "A11 filter 1 res temp(B1) warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器1 电阻温度（ B1 ）错误": {
   "en": "A11 filter 1 res temp(B1) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器1 电阻温度（ B1 ）传感器错误": {
   "en": "A11 fil 1 res tmp(B1) sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器通讯错误": {
   "en": "Generator inverter Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. Inv. Communication error"
   ],
   "repaired": false
  },
  "网侧逆变器通讯错误": {
   "en": "Grd. inverter Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grd. Inv. Communication error"
   ],
   "repaired": false
  },
  "直流熔断器熔断，反转机舱": {
   "en": "DC fuse blown, Invert. nacelle",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器（机舱）温度高": {
   "en": "inverter(nacelle) temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(nacelle) temp. high"
   ],
   "repaired": false
  },
  "逆变器（机舱）温度传感器错误": {
   "en": "inverter(nacelle) temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(nacelle) temp. sens. err"
   ],
   "repaired": false
  },
  "保险丝烧断，网侧滤波器": {
   "en": "Fuse blown, Grid filter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流回路充电超时": {
   "en": "Timeout  DC-circuit charging",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器不充电": {
   "en": "Grid filter decharging",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "功率控制错误": {
   "en": "Power control error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变频器配置错误": {
   "en": "Inverter configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "故障穿越功能激活": {
   "en": "FRT function activated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 滤波器T反应器温度（ B4 ）警告": {
   "en": "A11 filt reactor temp(B4) warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 滤波器T反应器温度（ B4 ） 错误": {
   "en": "A11 filt reactor temp(B4) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11过滤反应温度​​（ B4 ） 传感器错误": {
   "en": "A11 fil reac temp(B4) sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 RC 电容温度（ B2）的警告": {
   "en": "A11 RC Cap Temp (B2) warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 RC 电容温度（ B2 ）错误": {
   "en": "A11 RC Cap Temp (B2) error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 RC 电容温度（ B2 ）传感器错误": {
   "en": "A11 RC Cap Temp (B2) sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A11 RC Cap Temp (B2) sens. err"
   ],
   "repaired": false
  },
  "A11 LC电容温度（ B3 ）警告": {
   "en": "A11 LC Cap Temp (B3) warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 LC电容温度（ B3 ）错误": {
   "en": "A11 LC Cap Temp (B3) error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 LC电容温度（ B3 ）传感器错误": {
   "en": "A11 LC Cap Temp (B3) sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A11 LC Cap Temp (B3) sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B1温度传感器错误": {
   "en": "Grid filter B1 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B1 temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B1高温警告": {
   "en": "Grid filter B1 temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B1 temp. warning"
   ],
   "repaired": false
  },
  "网侧滤波器B1温度误差": {
   "en": "Grid filter B1 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B1 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器B2的温度传感器错误": {
   "en": "Grid filter B2 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B2 temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B2高温警告": {
   "en": "Grid filter B2 temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B2 temp. warning"
   ],
   "repaired": false
  },
  "网侧滤波器B2的温度误差": {
   "en": "Grid filter B2 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B2 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器B3温度传感器错误": {
   "en": "Grid filter B3 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B3 temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B3高温警告": {
   "en": "Grid filter B3 temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B3 temp. warning"
   ],
   "repaired": false
  },
  "网侧滤波器B3温度误差": {
   "en": "Grid filter B3 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B3 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器B4温度传感器错误": {
   "en": "Grid filter B4 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B4 temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B4高温警告": {
   "en": "Grid filter B4 temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B4 temp. warning"
   ],
   "repaired": false
  },
  "网侧滤波器B4的温度误差": {
   "en": "Grid filter B4 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B4 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器B5温度传感器错误": {
   "en": "Grid filter B5 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B5 temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器B5高温警告": {
   "en": "Grid filter B5 temperature warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B5 temp. warning"
   ],
   "repaired": false
  },
  "网侧滤波器B5的温度误差": {
   "en": "Grid filter B5 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B5 temp. error"
   ],
   "repaired": false
  },
  "变频器Modbus通讯故障": {
   "en": "Inverter modbus comain error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inverter modbus com. error"
   ],
   "repaired": false
  },
  "直流充电电阻过热": {
   "en": "DC-charge resistor too hot",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "压敏电阻保险丝缺陷": {
   "en": "Varistor fuse defect",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻传感器错误": {
   "en": "Grid filter RES sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻温度警告": {
   "en": "Grid filter RES temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电阻温度误差": {
   "en": "Grid filter RES temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES temp. error"
   ],
   "repaired": false
  },
  "A11滤波器2 电阻温度（ B2）的警告": {
   "en": "A11 filter 2 res temp(B2) warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器3 电阻温度（ B3 ）警告": {
   "en": "A11 filter 3 res temp(B3) warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器电容温度（ B5 ）警告": {
   "en": "A11 filter cap Temp(B5) warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器2 电阻温度（ B2 ）错误": {
   "en": "A11 filter 2 res temp(B2) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤波器3 电阻温度（ B3 ）错误": {
   "en": "A11 filter 3 res temp(B3) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11滤帽温度（ B5 ） 错误": {
   "en": "A11 filter cap Temp(B5) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 滤波器2电阻丝温度（B2）传感器错误": {
   "en": "A11 fil 2 res tmp(B2) sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A11 滤波器3电阻温度 （B3） 传感器错误": {
   "en": "A11 fil 3 res tmp(B3) sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻1传感器错误": {
   "en": "Grid filter RES1 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻1温度警告": {
   "en": "Grid filter RES1 temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES1 temp. warn."
   ],
   "repaired": false
  },
  "A11 滤波器上温度（ B5 ） 传感器错误": {
   "en": "A11 filt cap Temp(B5) sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻1温度误差": {
   "en": "Grid filter RES1 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES1 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电阻2传感器错误": {
   "en": "Grid filter RES2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻2温度警告": {
   "en": "Grid filter RES2 temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES2 temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电阻2温度误差": {
   "en": "Grid filter RES2 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES2 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电阻3传感器错误": {
   "en": "Grid filter RES3 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电阻3温度警告": {
   "en": "Grid filter RES3 temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES3 temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电阻3温度误差": {
   "en": "Grid filter RES3 temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RES3 temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器RC电阻传感器错误": {
   "en": "Grid filter RCRES sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器RC电阻温度警告": {
   "en": "Grid filter RCRES temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RCRES temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器RC电阻温度误差": {
   "en": "Grid filter RCRES temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RCRES temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器RC电容传感器错误": {
   "en": "Grid filter RCCAP sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器RC电容温度警告": {
   "en": "Grid filter RCCAP temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RCCAP temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器RC电容温度误差": {
   "en": "Grid filter RCCAP temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter RCCAP temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器LC电容传感器错误": {
   "en": "Grid filter LCCAP sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器LC电容温度警告": {
   "en": "Grid filter LCCAP temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter LCCAP temp. warn."
   ],
   "repaired": false
  },
  "飞抓重试活跃": {
   "en": "Fly catch retry active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器LC电容温度误差": {
   "en": "Grid filter LCCAP temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter LCCAP temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电容传感器错误": {
   "en": "Grid filter CAP sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电容温度警告": {
   "en": "Grid filter CAP temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter CAP temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电容温度误差": {
   "en": "Grid filter CAP temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter cap. temperature error",
    "Grid filter CAP temp. error",
    "Grid filter cap. temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电感传感器错误": {
   "en": "Grid filter INDUCT sensor err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电感温度警告": {
   "en": "Grid filter INDUCT temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter INDUCT temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电感温度误差": {
   "en": "Grid filter INDUCT temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter INDUCT temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电抗传感器错误": {
   "en": "Grid filter REACT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电抗温度​​警告": {
   "en": "Grid filter REACT temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter REACT temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器电抗温度误差": {
   "en": "Grid filter REACT temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter REACT temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器FRONT温度警告": {
   "en": "Grid filter FRONT temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter FRONT temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器FRONT温度误差": {
   "en": "Grid filter FRONT temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter FRONT temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器接触器错误": {
   "en": "Grid filter contactor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器电流超载": {
   "en": "Grid filter currententent overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter current overload"
   ],
   "repaired": false
  },
  "网侧滤波器配置错误": {
   "en": "Grid filter configuration err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器停止": {
   "en": "Grid Inverter stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid inverter stopped"
   ],
   "repaired": false
  },
  "发电机逆变器停止": {
   "en": "Generator inverter stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "功率量程误差": {
   "en": "Power scale error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超过电流进口限制": {
   "en": "currentent limit import exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Current limit import exceeded"
   ],
   "repaired": false
  },
  "超过电流出口限制": {
   "en": "currentent limit export exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Current limit export exceeded"
   ],
   "repaired": false
  },
  "变流器温度过低": {
   "en": "Converter temperature too low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器跳闸": {
   "en": "Converter tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流电压偏差过大": {
   "en": "DC-Volt deviation too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "避雷器压敏电阻误差": {
   "en": "Surge arrestor varistor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器模式改变错误": {
   "en": "Grid Inverter mode change err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid inverter mode change err."
   ],
   "repaired": false
  },
  "网侧滤波器电容传感器故障": {
   "en": "Grid filter cap. sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器空气温度传感器错误": {
   "en": "Grid filter air temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. air temp. sens. err"
   ],
   "repaired": false
  },
  "网侧滤波器的L1线圈传感错误": {
   "en": "Grid filter L1 winding sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. L1 winding sens err"
   ],
   "repaired": false
  },
  "网侧滤波器L2绕组传感器错误": {
   "en": "Grid filter L2 winding sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. L2 winding sens err"
   ],
   "repaired": false
  },
  "反应器热敏电阻链误差": {
   "en": "Reactor Thermistor chain error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Delta模块温度高": {
   "en": "Delta module temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Delta模块温度传感器错误": {
   "en": "Delta module temperature sensor err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Delta module temp. sensor err."
   ],
   "repaired": false
  },
  "网侧滤波器1电容传感器故障": {
   "en": "Grid filter 1 cap. sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 cap. sensor error"
   ],
   "repaired": false
  },
  "网侧滤波器2电容传感器故障": {
   "en": "Grid filter 2 cap. sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 cap. sensor error"
   ],
   "repaired": false
  },
  "网侧滤波器1 电阻传感器错误": {
   "en": "Grid filter 1 RES sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 RES sensor error"
   ],
   "repaired": false
  },
  "网侧滤波器1 电阻温度警告": {
   "en": "Grid filter 1 RES temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 RES temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器1 电阻温度误差": {
   "en": "Grid filter 1 RES temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 RES temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器2 电阻传感器错误": {
   "en": "Grid filter 2 RES sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 RES sensor error"
   ],
   "repaired": false
  },
  "网侧滤波器2 电阻温度警告": {
   "en": "Grid filter 2 RES temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 RES temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器2 电阻温度误差": {
   "en": "Grid filter 2 RES temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 RES temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器1 电抗传感器错误": {
   "en": "Grid filter 1 REACT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 REACT sens. error"
   ],
   "repaired": false
  },
  "网侧滤波器1电抗温度​​警告": {
   "en": "Grid filter 1 REACT temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 REACT temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器1电抗温度误差": {
   "en": "Grid filter 1 REACT temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 REACT temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器2 电抗传感器错误": {
   "en": "Grid filter 2 REACT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 REACT sens. error"
   ],
   "repaired": false
  },
  "网侧滤波器2反应温度​​警告": {
   "en": "Grid filter 2 REACT temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 REACT temp. warn."
   ],
   "repaired": false
  },
  "网侧滤波器2反应温度误差": {
   "en": "Grid filter 2 REACT temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 REACT temp. error"
   ],
   "repaired": false
  },
  "避雷器压敏电阻1 错误": {
   "en": "Surge arrestor varistor 1 err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器PACK温度警告": {
   "en": "Grid filter PACK temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter PACK temp. warn."
   ],
   "repaired": false
  },
  "避雷器压敏电阻器2错误": {
   "en": "Surge arrestor varistor 2 err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "保险丝烧断，网侧滤波器1": {
   "en": "Fuse blown, Grid filter 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "保险丝烧断，网格滤波器2": {
   "en": "Fuse blown, Grid filter 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流熔断器变流器 1熔断": {
   "en": "DC fuse Converter 1 blown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器FRONT传感器错误": {
   "en": "Grid filter FRONT sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直流熔断器变流器 2熔断": {
   "en": "DC fuse Converter 2 blown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主电抗器 1温度高": {
   "en": "Mainreactor 1 Temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主电抗器 1 U温度传感器错误": {
   "en": "Mainreactor 1 U temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 1 U temp. sens err"
   ],
   "repaired": false
  },
  "主电抗器 1 V温度传感错误": {
   "en": "Mainreactor 1 V temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 1 V temp. sens err"
   ],
   "repaired": false
  },
  "主电抗器 1 W温度传感器错误": {
   "en": "Mainreactor 1 W temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 1 W temp. sens err"
   ],
   "repaired": false
  },
  "超时变流器 1发电机同步": {
   "en": "Timeout Converter 1  Generator synchronzation.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Timeout Conv. 1  Gen. Sync."
   ],
   "repaired": false
  },
  "主电抗器 2温度高": {
   "en": "Mainreactor 2 Temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主电抗器 2U温度传感器错误": {
   "en": "Mainreactor 2 U temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 2 U temp. sens err"
   ],
   "repaired": false
  },
  "主电抗器 2 V温度传感错误": {
   "en": "Mainreactor 2 V temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 2 V temp. sens err"
   ],
   "repaired": false
  },
  "主电抗器 2 W温度传感器错误": {
   "en": "Mainreactor 2 W temperature sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainreactor 2 W temp. sens err"
   ],
   "repaired": false
  },
  "超时变流器2发电机同步": {
   "en": "Timeout Converter 2  Generator synchronzation.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Timeout Conv. 2  Gen. Sync."
   ],
   "repaired": false
  },
  "变流器1 冷却水温度传感错误": {
   "en": "Converter 1 coolingWater temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool.w. temp sens err"
   ],
   "repaired": false
  },
  "变流器1的冷却水温度警告": {
   "en": "Converter 1 cooling water temp warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool. water temp warn."
   ],
   "repaired": false
  },
  "变流器1的冷却水温度高": {
   "en": "Converter 1 cooling water temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool. water temp high"
   ],
   "repaired": false
  },
  "变流器2 冷却水温度传感错误": {
   "en": "Converter 2 coolingWater temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool.w. temp sens err"
   ],
   "repaired": false
  },
  "变流器2冷却水温度警告": {
   "en": "Converter 2 cooling water temp warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool. water temp warn."
   ],
   "repaired": false
  },
  "变流器2冷却水的温度高": {
   "en": "Converter 2 cooling water temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool. water temp high"
   ],
   "repaired": false
  },
  "Delta模式CVT1 温度传感器错误": {
   "en": "Delta mod cvt1 tmp. sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Delta模式CVT2 温度传感器错误": {
   "en": "Delta mod cvt2 tmp. sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Delta模块CVT1温度高": {
   "en": "Delta module cvt1 temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Delta module cvt1 temp. high"
   ],
   "repaired": false
  },
  "Delta模块cvt2温度高": {
   "en": "Delta module cvt2 temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Delta module cvt2 temp. high"
   ],
   "repaired": false
  },
  "变流器1 冷却水压力传感错误": {
   "en": "Converter 1 coolingWater pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool.w. pres. sens err"
   ],
   "repaired": false
  },
  "变流器2 冷却水压力传感错误": {
   "en": "Converter 2 coolingWater pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool.w. pres. sens err"
   ],
   "repaired": false
  },
  "变流器1冷却水压力警告": {
   "en": "Converter 1 cooling water pressure warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool. water pres. warn"
   ],
   "repaired": false
  },
  "变流器2冷却水压力警告": {
   "en": "Converter 2 cooling water pressure warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool. water pres. warn"
   ],
   "repaired": false
  },
  "变流器1冷却水压力低": {
   "en": "Converter 1 cooling water pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cool. water pres. low"
   ],
   "repaired": false
  },
  "变流器2冷却水压力低": {
   "en": "Converter 2 cooling water pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 cool. water pres. low"
   ],
   "repaired": false
  },
  "变流器1通讯错误": {
   "en": "Converter 1 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 Communication error"
   ],
   "repaired": false
  },
  "变流器2通讯错误": {
   "en": "Converter 2 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 Communication error"
   ],
   "repaired": false
  },
  "直流电压偏差高转换1": {
   "en": "DC-Volt deviation high Converter 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "DC-Volt deviation high Conv. 1"
   ],
   "repaired": false
  },
  "直流电压偏差高变流器2": {
   "en": "DC-Volt deviation high Converter 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "DC-Volt deviation high Conv. 2"
   ],
   "repaired": false
  },
  "主断路器 1切出": {
   "en": "Mainbreaker 1 cut out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 2切出": {
   "en": "Mainbreaker 2 cut out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 1风扇1": {
   "en": "T.O.R Converter 1 fan 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 1风扇2": {
   "en": "T.O.R Converter 1 fan 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 2风扇1": {
   "en": "T.O.R Converter 2 fan 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 2风扇2": {
   "en": "T.O.R Converter 2 fan 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 1冷却加热器": {
   "en": "T.O.R Converter 1 cool heater",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 2冷却加热器": {
   "en": "T.O.R Converter 2 cool heater",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 1冷却泵": {
   "en": "T.O.R Converter 1 coolant pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器 2冷却泵": {
   "en": "T.O.R Converter 2 coolant pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超时变流器1直流充电": {
   "en": "Timeout Converter 1  DC-charging",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Timeout Conv. 1  DC-charging"
   ],
   "repaired": false
  },
  "超时变流器2直流充电": {
   "en": "Timeout Converter 2  DC-charging",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Timeout Conv. 2  DC-charging"
   ],
   "repaired": false
  },
  "变流器 1直流电压低": {
   "en": "Converter 1 DC voltage low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 2直流电压低": {
   "en": "Converter 2 DC voltage low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器1 电流超载": {
   "en": "Grid filter 1 currententent overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter 1 current overload"
   ],
   "repaired": false
  },
  "网侧滤波器2 电流超载": {
   "en": "Grid filter 2 currententent overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter 2 current overload"
   ],
   "repaired": false
  },
  "变流器1个IP ADR读取失败": {
   "en": "Converter 1 IP adr read failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 IP adr read failed"
   ],
   "repaired": false
  },
  "变流器2的IP ADR读取失败": {
   "en": "Converter 2 IP adr read failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 2 IP adr read failed"
   ],
   "repaired": false
  },
  "变流器冷却机模式": {
   "en": "Converter cooling dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器冷却NAC干燥模式": {
   "en": "Converter cooling Nac Dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooling Nac Dryer mode"
   ],
   "repaired": false
  },
  "变流器冷却sys.干燥模式": {
   "en": "Converter cooling sys.1 Dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Converter cooling sys.2 Dryer mode",
    "Conv. cooling sys.1 Dryer mode",
    "Conv. cooling sys.2 Dryer mode"
   ],
   "repaired": false
  },
  "变流器发电机同步超时": {
   "en": "Timeout Converter Generator synchronzation.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Timeout Converter Gen. Sync."
   ],
   "repaired": false
  },
  "过高的直流环节振荡": {
   "en": "Too high DC-Link oscillation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器冷却水压力低": {
   "en": "inverter cooling water Pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. cooling water press. low"
   ],
   "repaired": false
  },
  "逆变器冷却水温度传感器错误": {
   "en": "inverter cooling Water temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. cool. w. temp sensor err"
   ],
   "repaired": false
  },
  "逆变器冷却水温度警告": {
   "en": "inverter cooling water temperature warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. cooling water temp. warn."
   ],
   "repaired": false
  },
  "逆变器冷却水温度高": {
   "en": "inverter cooling Water temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. cool. w. temp high"
   ],
   "repaired": false
  },
  "逆变器（机舱） 冷却水温度传感错误": {
   "en": "inverter(N) coolingWater temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(N) cool.w. temp sens err"
   ],
   "repaired": false
  },
  "逆变器（ 机舱）的冷却水温度警告": {
   "en": "inverter(N) cooling water temp warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(N) cool. water temp warn."
   ],
   "repaired": false
  },
  "逆变器（ 机舱） 冷却水温度高": {
   "en": "inverter(N) coolingWater temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(N) cool.w. temp high"
   ],
   "repaired": false
  },
  "逆变器（塔筒） 冷却水压力警告": {
   "en": "inverter(tow) coolwater pressure war",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(tow) coolwater pres. war"
   ],
   "repaired": false
  },
  "逆变器（ 机舱 ） 冷却水压力警告": {
   "en": "inverter(nac) coolwater pressure war",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(nac) coolwater pres. war"
   ],
   "repaired": false
  },
  "逆变器（塔筒） 冷却水压力低": {
   "en": "inverter(tow) coolwater pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(tow) coolwater pres. low"
   ],
   "repaired": false
  },
  "逆变器（ 机舱 ） 冷却水压力低": {
   "en": "inverter(nac) coolwater pressure low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv.(nac) coolwater pres. low"
   ],
   "repaired": false
  },
  "变流器温度低": {
   "en": "Converter temperature too loWater",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Converter temperature too low."
   ],
   "repaired": false
  },
  "T.O.R 变流器冷却液加热器": {
   "en": "T.O.R Converter coolant heater",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器拖冷却水压力传感错误": {
   "en": "inverter Tow coolWater pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. Tow coolw. pres. sens err"
   ],
   "repaired": false
  },
  "变频器NAC 冷却水压力传感错误": {
   "en": "inverter Nac coolWater pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. Nac coolw. pres. sens err"
   ],
   "repaired": false
  },
  "变流器冷却水泵热保护": {
   "en": "T.O.R Converter coolant pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器的冷却配置错误": {
   "en": "Converter cooling configuration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv cooling configuration err"
   ],
   "repaired": false
  },
  "T.O.R 变流器风扇1 （塔筒）": {
   "en": "T.O.R Converter fan 1 (Tower)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R 变流器风扇2 （塔筒）": {
   "en": "T.O.R Converter fan 2 (Tower)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器冷却液流量误差": {
   "en": "Converter coolant flow error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 1冷却液流量误差": {
   "en": "Converter 1 coolant flow error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器 2冷却液流量误差": {
   "en": "Converter 2 coolant flow error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器凉却风扇错误": {
   "en": "Converter cool fan error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "塔筒变流冷却水低": {
   "en": "Tower Converter cooling Water low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Tower Conv. Cool. Water low"
   ],
   "repaired": false
  },
  "机舱变流器冷却水低": {
   "en": "Nacel Converter cooling Water low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nacel Conv. Cool. Water low"
   ],
   "repaired": false
  },
  "塔筒器冷却阀故障": {
   "en": "Tower Converter cooling Valve Fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Tower Conv. Cool. Valve Fail"
   ],
   "repaired": false
  },
  "机舱变流器冷却阀故障": {
   "en": "Nacel Converter cooling Valve Fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nacel Conv. Cool. Valve Fail"
   ],
   "repaired": false
  },
  "变流器出口温度传感器错误": {
   "en": "Converter outlet temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. outlet temp sensor err"
   ],
   "repaired": false
  },
  "变流器冷却器温度传感器错误": {
   "en": "Converter cooler temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooler temp sensor err"
   ],
   "repaired": false
  },
  "变流器1出口温度传感器错误": {
   "en": "Converter1 outlet temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv1 outlet temp sensor err"
   ],
   "repaired": false
  },
  "变流器2出口温度传感器错误": {
   "en": "Converter2 outlet temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv2 outlet temp sensor err"
   ],
   "repaired": false
  },
  "变流器1冷却器温度传感器错误": {
   "en": "Converter1 cooler temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv1 cooler temp sensor err"
   ],
   "repaired": false
  },
  "变流器2冷却器温度传感器错误": {
   "en": "Converter2 cooler temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv2 cooler temp sensor err"
   ],
   "repaired": false
  },
  "V型模式关闭：变流器笏太热": {
   "en": "V-Mode off: Converter Wat. too hot",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "V-Mode off: Conv. Wat. too hot"
   ],
   "repaired": false
  },
  "T.O.R V型模式风扇1": {
   "en": "T.O.R V-Mode fan 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "T.O.R V型模式风扇2": {
   "en": "T.O.R V-Mode fan 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停止变流器1的冷却系统": {
   "en": "Converter 1 cooling system stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. 1 cooling system stopped"
   ],
   "repaired": false
  },
  "停止变流器2冷却系统": {
   "en": "Converter 2 cooling system stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器1电容温度误差": {
   "en": "Grid filter 1 CAP temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 1 CAP temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器2温度误差": {
   "en": "Grid filter 2 CAP temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filt. 2 CAP temp. error"
   ],
   "repaired": false
  },
  "网侧滤波器电容2传感器错误": {
   "en": "Grid filter cap2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器B1高温错误": {
   "en": "Grid filter B1 temperature high err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B1 temp. high err"
   ],
   "repaired": false
  },
  "网侧滤波器B1传感器错误": {
   "en": "Grid filter B1 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器B2高温错误": {
   "en": "Grid filter B2 temperature high err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B2 temp. high err"
   ],
   "repaired": false
  },
  "网侧滤波器B2传感器错误": {
   "en": "Grid filter B2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器冷却W/变压器出口TOR": {
   "en": "Inv cool w/Transformer vent. TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv cool w/transf. vent. TOR"
   ],
   "repaired": false
  },
  "网侧滤波器B3高温错误": {
   "en": "Grid filter B3 temperature high err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B3 temp. high err"
   ],
   "repaired": false
  },
  "网侧滤波器B3传感器错误": {
   "en": "Grid filter B3 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器B4高温错误": {
   "en": "Grid filter B4 temperature high err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter B4 temp. high err"
   ],
   "repaired": false
  },
  "变频器冷却水（ 机舱 ）出口TOR": {
   "en": "inverter cool w (nac) vent. TOR.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Inv. cool w (nac) vent. TOR."
   ],
   "repaired": false
  },
  "网侧滤波器B4传感器错误": {
   "en": "Grid filter B4 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35内部温度传感器错误": {
   "en": "A35 Internal temp sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35内部温度警告": {
   "en": "A35 Internal temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35电阻温度传感器错误": {
   "en": "A35 Resistor temp sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35电阻温度警告": {
   "en": "A35 Resistor temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35反应器温度传感器错误": {
   "en": "A35 Reactor temp sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35反应堆温度警告": {
   "en": "A35 Reactor temp warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35保险丝熔断谐波滤波器": {
   "en": "A35 Fuse blown Harmonic Filter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A35滤波器接触器错误": {
   "en": "A35 filter contactor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无效的主轴承配置": {
   "en": "Invalid main bearing config.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TOR主轴承油泵": {
   "en": "TOR main bearing oil pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承油位高": {
   "en": "Main bearing oil level high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承油位低": {
   "en": "Main bearing oil level low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承油位低，启动": {
   "en": "main bearing oil level low,startup",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. bear. oil level low,startup"
   ],
   "repaired": false
  },
  "主轴承油滤波器堵塞": {
   "en": "main bearing oil filter blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. bearing oil filter blocked"
   ],
   "repaired": false
  },
  "主轴承油流低": {
   "en": "Main bearing oil flow low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "一次侧轴承入口压力传感器错误": {
   "en": "main bearinginlet press sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. bear.inlet press sensor err"
   ],
   "repaired": false
  },
  "一次侧轴承泵压力传感器错误": {
   "en": "main bearingpump press sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. bear.pump press sensor err"
   ],
   "repaired": false
  },
  "一次侧轴承泵温度传感器错误": {
   "en": "main bearingpump temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. bear.pump temp sensor err"
   ],
   "repaired": false
  },
  "发电机轴承DE泵温度传感错误": {
   "en": "G. bearing DE pump temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G. bear. DE pump temp sens err"
   ],
   "repaired": false
  },
  "发电机轴承DE油槽温度传感错误": {
   "en": "G. bearing DE sump temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G. bear. DE sump temp sens err"
   ],
   "repaired": false
  },
  "发电机 轴承NDE泵温度传感错误": {
   "en": "G. bearingNDE pump temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G. bear.NDE pump temp sens err"
   ],
   "repaired": false
  },
  "发电机 轴承NDE油底壳温度传感错误": {
   "en": "G. bearingNDE sump temp sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G. bear.NDE sump temp sens err"
   ],
   "repaired": false
  },
  "主轴承泵入口压力传感错误": {
   "en": "main bearing pump inlet Pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB. pump inlet press. sens err"
   ],
   "repaired": false
  },
  "MB泵出口压力传感错误": {
   "en": "MB pump outlet Pressure sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB pump outlet press. sens err"
   ],
   "repaired": false
  },
  "一次侧承担石油A级传感器错误": {
   "en": "Main bear oil level A sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "一次侧承担油B级传感器错误": {
   "en": "Main bear oil level B sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承 DE泵入口传感器错误": {
   "en": "G.bear DE pump inlet sens err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承 DE泵出口传感器错误": {
   "en": "G.bear DE pump outlet sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承 DE油位传感器错误": {
   "en": "G.bear DE oil level sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承无损检测泵进传感器错误": {
   "en": "G.bear NDE pump inlet sens err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承无损检测泵出口传感器": {
   "en": "G.bear NDE pump outlet sens er",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机轴承无损检测油位传感器错误": {
   "en": "G.bear NDE oil level sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G.bear NDE oil level sens. err"
   ],
   "repaired": false
  },
  "主轴承油传感器A错误-停止": {
   "en": "main bearing oil sensor A err.-stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB. oil sensor A err. - stop"
   ],
   "repaired": false
  },
  "主轴承油传感器B错误-停止": {
   "en": "main bearing oil sensor B err.-stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB. oil sensor B err. - stop"
   ],
   "repaired": false
  },
  "发电机轴承 DE油传感器错误停": {
   "en": "G.bear DE oil sensor err-stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G.bear DE oil sensor err -stop"
   ],
   "repaired": false
  },
  "发电机轴承无损检测油传感器错误停": {
   "en": "G.bear NDE oil sensor err-stop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "G.bear NDE oil sens. err -stop"
   ],
   "repaired": false
  },
  "MB的润滑低压力滤波器": {
   "en": "MB lubrication Low filter pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB Lub. Low filter pressure"
   ],
   "repaired": false
  },
  "MB的润滑高压力滤波器": {
   "en": "MB lubrication High filter pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MB Lub. High filter pressure"
   ],
   "repaired": false
  },
  "MB的压力1传感器错误": {
   "en": "MB pressure 1 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MB的压力2传感器错误": {
   "en": "MB pressure 2 sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MB的温度传感器错误": {
   "en": "MB temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MB的滴水盘水平高": {
   "en": "MB drip tray level high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MB油泵TOR错误": {
   "en": "MB oil pump TOR error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "AB润滑油过滤器堵塞": {
   "en": "ABlubrication Filter blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Filter blocked"
   ],
   "repaired": false
  },
  "AB润滑油无流量ST备用泵": {
   "en": "ABlubrication No flow st. backup pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. No flow st. backup pump"
   ],
   "repaired": false
  },
  "AB润滑油无流量-低压": {
   "en": "ABlubrication No flow-low pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. No flow - low pressure"
   ],
   "repaired": false
  },
  "AB润滑油无流量-高压力": {
   "en": "ABlubrication No flow-high pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. No flow - high pressure"
   ],
   "repaired": false
  },
  "AB润滑油高油轴承油槽B": {
   "en": "ABlubrication Oil high bearing sump B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil high bearing sump B"
   ],
   "repaired": false
  },
  "AB润滑油低油轴承油槽B": {
   "en": "ABlubrication Oil low bearing sump B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bearing sump B"
   ],
   "repaired": false
  },
  "AB润滑油油低轴承油底壳B错误": {
   "en": "ABlubrication Oil low bear sump B err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bear sump B err"
   ],
   "repaired": false
  },
  "AB润滑油低油轴承贮槽": {
   "en": "ABlubrication Oil low bearing sump A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bearing sump A"
   ],
   "repaired": false
  },
  "AB润滑油油低轴承贮槽错误": {
   "en": "ABlubrication Oil low bear sump A err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bear sump A err"
   ],
   "repaired": false
  },
  "AB润滑油主泵TOR": {
   "en": "ABlubrication Main pump TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Main pump TOR"
   ],
   "repaired": false
  },
  "AB润滑油备用泵测试失败": {
   "en": "ABlubrication Backup pump test failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Backup pump test failed"
   ],
   "repaired": false
  },
  "C润滑滤波器堵塞": {
   "en": "C lubrication Filter blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Filter blocked"
   ],
   "repaired": false
  },
  "C润滑无流量ST备用泵": {
   "en": "C lubrication No flow st. backup pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. No flow st. backup pump"
   ],
   "repaired": false
  },
  "C润滑无流量-低压": {
   "en": "C lubrication No flow-low pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. No flow - low pressure"
   ],
   "repaired": false
  },
  "C润滑无流量-高压力": {
   "en": "C lubrication No flow-high pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. No flow - high pressure"
   ],
   "repaired": false
  },
  "C油润滑轴承高油底壳": {
   "en": "C lubrication Oil high bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Oil high bearing sump"
   ],
   "repaired": false
  },
  "C油润滑轴承低油底壳": {
   "en": "C lubrication Oil low bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Oil low bearing sump"
   ],
   "repaired": false
  },
  "C油润滑轴承低油底壳错误": {
   "en": "C lubrication Oil low bearing sump err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Oil low bear. sump err."
   ],
   "repaired": false
  },
  "C润滑备用泵测试失败": {
   "en": "C lubrication Backup pump test failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Backup pump test failed"
   ],
   "repaired": false
  },
  "D润滑滤波器堵塞": {
   "en": "D lubrication Filter blocked",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Filter blocked"
   ],
   "repaired": false
  },
  "D润滑无流量-低压": {
   "en": "D lubrication No flow-low pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. No flow - low pressure"
   ],
   "repaired": false
  },
  "D润滑无流量-压力高": {
   "en": "D lubrication No flow-high pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. No flow - high pressure"
   ],
   "repaired": false
  },
  "D油润滑轴承高油底壳": {
   "en": "D lubrication Oil high bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil high bearing sump"
   ],
   "repaired": false
  },
  "D油润滑轴承低油底壳": {
   "en": "D lubrication Oil low bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil low bearing sump"
   ],
   "repaired": false
  },
  "D油润滑轴承低油底壳错误": {
   "en": "D lubrication Oil low bearing sump err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil low bear. sump err."
   ],
   "repaired": false
  },
  "D润滑主泵TOR": {
   "en": "D lubrication Main pump TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Main pump TOR"
   ],
   "repaired": false
  },
  "D润滑备用泵测试失败": {
   "en": "D lubrication Backup pump test failed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Backup pump test failed"
   ],
   "repaired": false
  },
  "免费-未使用": {
   "en": "Free-Not used",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Free - Not used"
   ],
   "repaired": false
  },
  "ABB ACS880INU： 失败未知": {
   "en": "ABB ACS880 INU: FAIL UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 2281 ） ：偏移校准": {
   "en": "ABBINU (2281): calibration offset",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (2281): Calib offset"
   ],
   "repaired": false
  },
  "ABBINU （ 2310） ：过电流.产量": {
   "en": "ABBINU (2310): Overcur. output",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 14enc电源故障": {
   "en": "Generator inverter: 14 Enc. power fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 14 Enc. power fail"
   ],
   "repaired": false
  },
  "ABBINU （ 2330） ：接地漏电": {
   "en": "ABBINU (2330): Earth leakage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 2340 ） ：电机电缆短路": {
   "en": "ABBINU (2340): Motor cable SC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 17 未识别的pwr in.board": {
   "en": "Generator inverter: 17 Uident.pwr in.board",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 17 Uident.pwr in.board"
   ],
   "repaired": false
  },
  "ABBINU （ 2381 ） ： IGBT的过载": {
   "en": "ABBINU (2381): IGBT overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3130 ） ： INP.缺相": {
   "en": "ABBINU (3130): Inp. phase loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 20 Paramain编辑丢失": {
   "en": "Generator inverter: 20 Paramain edit lost",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 20 Param. edit lost"
   ],
   "repaired": false
  },
  "ABBINU （ 3180 ） ：chg.继电器丢失": {
   "en": "ABBINU (3180): Chg. relay lost",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3181 ）：跨接": {
   "en": "ABBINU (3181): Cross conn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3210 ） ：直流过压": {
   "en": "ABBINU (3210): DC overvoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3220 ） ：直流欠压": {
   "en": "ABBINU (3220): DC undervoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3280 ） ：待机超时": {
   "en": "ABBINU (3280): Standby timeout",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3291 ） ：直流电压差异": {
   "en": "ABBINU (3291): DC voltage diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3381 ） ：输出缺相": {
   "en": "ABBINU (3381): Out. phase loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 3385 ） ：调相": {
   "en": "ABBINU (3385): Autophasing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 4210 ） ： IGBT过热": {
   "en": "ABBINU (4210): IGBT overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (4210): IGBT overtemp."
   ],
   "repaired": false
  },
  "ABBINU （ 4290 ） ：冷却机": {
   "en": "ABBINU (4290): Cooling Drive",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 42F1 ） ： IGBT温度": {
   "en": "ABBINU (42F1): IGBT temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (42F1): IGBT temp."
   ],
   "repaired": false
  },
  "ABBINU （ 4310 ） ：温度过高": {
   "en": "ABBINU (4310): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (4310): Excess temp."
   ],
   "repaired": false
  },
  "ABBINU （ 4380 ） ：温度过高": {
   "en": "ABBINU (4380): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (4380): Excess temp."
   ],
   "repaired": false
  },
  "ABBINU （ 4981 ）：外部温度": {
   "en": "ABBINU (4981): External temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (4981): External temp."
   ],
   "repaired": false
  },
  "ABBINU （ 5080 ） ：冷却风扇卡住": {
   "en": "ABBINU (5080): cooling fan stuck",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (5080): Cool. fan stuck"
   ],
   "repaired": false
  },
  "ABBINU （ 5091 ） ：安全转矩关闭": {
   "en": "ABBINU (5091): Safe torque off",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5092 ） ： PU逻辑错误": {
   "en": "ABBINU (5092): PU logic error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5681 ） ： PU通讯": {
   "en": "ABBINU (5681): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (5681): PU comm."
   ],
   "repaired": false
  },
  "ABBINU （ 5682 ） ：功率单元丢失": {
   "en": "ABBINU (5682): Power unit lost",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5690 ） ： PU通讯": {
   "en": "ABBINU (5690): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (5690): PU comm."
   ],
   "repaired": false
  },
  "ABBINU （ 5691 ） ：外箱尺寸线路": {
   "en": "ABBINU (5691): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5692 ） ： PU板PU失败": {
   "en": "ABBINU (5692): PU board PUfail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5693 ） ：外箱尺寸线路": {
   "en": "ABBINU (5693): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5694 ） ： PU 通讯U": {
   "en": "ABBINU (5694): PU commu.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 5696 ） ： PU状态反馈": {
   "en": "ABBINU (5696): PU state feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (5696): PU state feedb."
   ],
   "repaired": false
  },
  "ABBINU （ 5697 ） ：充电的反馈": {
   "en": "ABBINU (5697): Charging feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (5697): Charging feedb."
   ],
   "repaired": false
  },
  "ABBINU （ 5698 ） ：未知PU": {
   "en": "ABBINU (5698): Unknown PU",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6180 ）：内部软件错误": {
   "en": "ABBINU (6180): Internal SW err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6181 ） ： FPGA版本": {
   "en": "ABBINU (6181): FPGA version",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6306 ） ： FBA映射文件": {
   "en": "ABBINU (6306): FBA A map file",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6481 ） ：工作超负荷": {
   "en": "ABBINU (6481): Task overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6487 ） ：堆栈溢出": {
   "en": "ABBINU (6487): Stack overflow",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 64A1 ） ：内部文件加载": {
   "en": "ABBINU (64A1): internal file load",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (64A1): Int. file load"
   ],
   "repaired": false
  },
  "ABBINU （ 64A2 ） ：内部记录": {
   "en": "ABBINU (64A2): Internal record",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 55 D3分机跳闸": {
   "en": "Generator inverter: 55 D3 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 55 D3 ext trip"
   ],
   "repaired": false
  },
  "ABBINU （ 64A3 ） ：应用程序加载": {
   "en": "ABBINU (64A3): App. loading",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 64B2 ） ：用户设置故障": {
   "en": "ABBINU (64B2): User set fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 64E1 ） ：内核超载": {
   "en": "ABBINU (64E1): Kernel overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6581 ） ：参数系统": {
   "en": "ABBINU (6581): Parameter sys.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （部65a1 ） ：FBA的参数": {
   "en": "ABBINU (65A1): FBA A parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7081 ） ：面板端口": {
   "en": "ABBINU (7081): Panel port",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7082 ） ：外部I / O类型": {
   "en": "ABBINU (7082): external I/O type",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (7082): Ext. I/O type"
   ],
   "repaired": false
  },
  "ABBINU （ 7121 ） ：电机堵转": {
   "en": "ABBINU (7121): Motor stall",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7181 ） ：制动电阻": {
   "en": "ABBINU (7181): Brake resistor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7183 ） ： BR过剩": {
   "en": "ABBINU (7183): BR excess",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7184 ） ：制动电阻线": {
   "en": "ABBINU (7184): Brake res. wire",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7191 ） ：BC短路": {
   "en": "ABBINU (7191): BC short circ.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7192 ） ：BC多余的IGBT": {
   "en": "ABBINU (7192): BC IGBT excess",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 69 CONF 跳闸": {
   "en": "Generator inverter: 69 conf. trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 69 conf. trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 70 Datumize错误": {
   "en": "Generator inverter: 70 Datumize error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 70 Datumize error"
   ],
   "repaired": false
  },
  "ABBINU （ 71A2 ） ：机械制动": {
   "en": "ABBINU (71A2): Mechanical brak",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 71A3 ） ：机械制动": {
   "en": "ABBINU (71A3): Mechanical brak",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 71A5 ） ：机械制动": {
   "en": "ABBINU (71A5): Mechanical brak",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7301 ） ：电机速度FB": {
   "en": "ABBINU (7301): Motor speed fb.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7310 ） ：超速电机": {
   "en": "ABBINU (7310): Overspeed Motor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7358 ） ：线路侧变流器": {
   "en": "ABBINU (7358): Line side Converter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (7358): Line side conv."
   ],
   "repaired": false
  },
  "ABBINU （ 7381 ） ：编码器FB  1": {
   "en": "ABBINU (7381): Encoder fb. 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7391 ） ：编码器FB  2": {
   "en": "ABBINU (7391): Encoder fb. 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 73A0 ） ：速度反馈": {
   "en": "ABBINU (73A0): Speed feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (73A0): Speed feedback"
   ],
   "repaired": false
  },
  "ABBINU （ 73A1 ） ：负载反馈": {
   "en": "ABBINU (73A1): Load feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (73A1): Load feedback"
   ],
   "repaired": false
  },
  "发电机逆变器： 81 D4转跳闸": {
   "en": "Generator inverter: 81 D4 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 81 D4 ext trip"
   ],
   "repaired": false
  },
  "ABBINU （ 73B0 ） ： 紧急斜坡": {
   "en": "ABBINU (73B0): Emergency ramp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "ABBINU (73B0): emergencygency ramp"
   ],
   "repaired": true
  },
  "ABBINU （ 7510 ） ： FBA A通信": {
   "en": "ABBINU (7510): FBA A Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (7510): FBA A comm."
   ],
   "repaired": false
  },
  "ABBINU （ 7581 ） ： DDCS控制器": {
   "en": "ABBINU (7581): DDCS controller",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 9081 ）：外部错误1": {
   "en": "ABBINU (9081): External fault1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （9073 ）：外部错误2": {
   "en": "ABBINU (9082): External fault2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 9083 ）：外部错误3": {
   "en": "ABBINU (9083): External fault3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 9084 ）：外部错误4": {
   "en": "ABBINU (9084): External fault4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 9085 ）：外部错误5": {
   "en": "ABBINU (9085): External fault5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 90 D5ext跳闸": {
   "en": "Generator inverter: 90 D5 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 90 D5 ext trip"
   ],
   "repaired": false
  },
  "ABBINU （ A2A1 ） ： 电流校准": {
   "en": "ABBINU (A2A1): currentent calibration.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A2A1): Current calib."
   ],
   "repaired": false
  },
  "ABBINU （ A2B1 ） ： 过电流输出": {
   "en": "ABBINU (A2B1): Overcurrentent Outp.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A2B1): Overcurr. Outp."
   ],
   "repaired": false
  },
  "发电机逆变器： 93频率超临界": {
   "en": "Generator inverter: 93 SFE freq out of lim",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 93 SFE freq out of lim"
   ],
   "repaired": false
  },
  "ABBINU （ A2B3 ） ：接地漏电": {
   "en": "ABBINU (A2B3): Earth leakage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A2B4 ） ：电机电缆SC": {
   "en": "ABBINU (A2B4): Motor cable SC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A2BA ） ： IGBT的过载": {
   "en": "ABBINU (A2BA): IGBT overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 97 Prerel  EXP": {
   "en": "Generator inverter: 97 Prerel. exp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 97 Prerel. exp"
   ],
   "repaired": false
  },
  "ABBINU （ A3A1 ） ：直流过压": {
   "en": "ABBINU (A3A1): DC overvoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A3A2 ） ：直流欠压": {
   "en": "ABBINU (A3A2): DC undervoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A3C1 ） ：直流电压差异": {
   "en": "ABBINU (A3C1): DC volt diff.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A3AA ） ：直流未充电": {
   "en": "ABBINU (A3AA): DC not charged",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A490 ） ： 不正确的温度": {
   "en": "ABBINU (A490): Incorrectect temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A490): Incorrect temp."
   ],
   "repaired": false
  },
  "ABBINU （ A491 ）：外部温度": {
   "en": "ABBINU (A491): External temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A491): External temp."
   ],
   "repaired": false
  },
  "ABBINU （ A4A1 ） ： IGBT过热": {
   "en": "ABBINU (A4A1): IGBT overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A4A1): IGBT overtemp."
   ],
   "repaired": false
  },
  "ABBINU （ A4A9 ） ：冷却": {
   "en": "ABBINU (A4A9): Cooling",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A4B0 ） ：温度过高": {
   "en": "ABBINU (A4B0): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A4B0): Excess temp."
   ],
   "repaired": false
  },
  "ABBINU （ A4B1 ） ：温度过高": {
   "en": "ABBINU (A4B1): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A4B1): Excess temp."
   ],
   "repaired": false
  },
  "ABBINU （ A4F6 ） ： IGBT温度": {
   "en": "ABBINU (A4F6): IGBT temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A4F6): IGBT temp."
   ],
   "repaired": false
  },
  "ABBINU （ A580 ） ： PU通讯": {
   "en": "ABBINU (A580): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A580): PU comm."
   ],
   "repaired": false
  },
  "ABBINU （ A5A0 ） ：安全转矩关闭": {
   "en": "ABBINU (A5A0): Safe torque off",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A5EA ） ：外箱尺寸线路": {
   "en": "ABBINU (A5EA): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A5EB ） ： PU板PU失败": {
   "en": "ABBINU (A5EB): PU board PUfail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A5EC ） ： PU通讯": {
   "en": "ABBINU (A5EC): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A5EC): PU comm."
   ],
   "repaired": false
  },
  "ABBINU （ A5EF ） ： PU状态反馈": {
   "en": "ABBINU (A5EF): PU state feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A5EF): PU state feedb."
   ],
   "repaired": false
  },
  "ABBINU （ A5F0 ） ：充电的反馈": {
   "en": "ABBINU (A5F0): Charging feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A5F0): Charging feedb."
   ],
   "repaired": false
  },
  "ABBINU （ A6A5 ） ：无电机数据": {
   "en": "ABBINU (A6A5): No motor data",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A6D1 ） ： FBA的参数": {
   "en": "ABBINU (A6D1): FBA A parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A780 ） ：电机堵转": {
   "en": "ABBINU (A780): Motor stall",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A782 ） ： FEN温度": {
   "en": "ABBINU (A782): FEN temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A791 ） ：制动电阻": {
   "en": "ABBINU (A791): Brake resistor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A793 ） ： BR过剩": {
   "en": "ABBINU (A793): BR excess",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （A794） ： BR数据刹车": {
   "en": "ABBINU (A794): BR data Brake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A797 ） ：速度反馈": {
   "en": "ABBINU (A797): Speed feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A797): Speed feedback"
   ],
   "repaired": false
  },
  "ABBINU （ A79B ） ：BC短路": {
   "en": "ABBINU (A79B): BC short circ.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A79C ） ：BC多余的IGBT": {
   "en": "ABBINU (A79C): BC IGBT excess",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7A1 ） ：机械制动": {
   "en": "ABBINU (A7A1): Mech. brake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7A2 ） ：机械制动": {
   "en": "ABBINU (A7A2): Mech. brake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7A5 ） ：机械制动": {
   "en": "ABBINU (A7A5): Mech. brake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7AB ） ：扩展I / O": {
   "en": "ABBINU (A7AB): Extension I/O",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7B0 ） ：电机速度FB": {
   "en": "ABBINU (A7B0): Motor speed fb.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7C1 ） ： FBA A通信": {
   "en": "ABBINU (A7C1): FBA A Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A7C1): FBA A comm."
   ],
   "repaired": false
  },
  "ABBINU （ A7CA ） ： DDCS控制器": {
   "en": "ABBINU (A7CA): DDCS controller",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7CB ） ：分子式通讯亏损": {
   "en": "ABBINU (A7CB): MF comm loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7E1 ） ：编码器错误1": {
   "en": "ABBINU (A7E1): Encoder 1 error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7E2 ） ：编码器2的错误": {
   "en": "ABBINU (A7E2): Encoder 2 error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A7EE ） ：面板亏损": {
   "en": "ABBINU (A7EE): Panel loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A881 ） ：输出继电器娃": {
   "en": "ABBINU (A881): Output relay wa",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A882 ） ：电机启动娃": {
   "en": "ABBINU (A882): Motor starts wa",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A883 ） ： 不间断电源电源警告": {
   "en": "ABBINU (A883): Power ups warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A884 ） ：主接触器": {
   "en": "ABBINU (A884): Main contactor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A885 ） ：直流充电警告": {
   "en": "ABBINU (A885): DC charge warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A886 ） ：导通时间1": {
   "en": "ABBINU (A886): On-time 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A887 ） ：导通时间2": {
   "en": "ABBINU (A887): On-time 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A888 ） ：边沿计数器1": {
   "en": "ABBINU (A888): Edge counter 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A889 ） ：边沿计数器2": {
   "en": "ABBINU (A889): Edge counter 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88A ） ：值计数器1": {
   "en": "ABBINU (A88A): Value counter 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88B ） ：值计数器2": {
   "en": "ABBINU (A88B): Value counter 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88E ） ：机柜风扇警告": {
   "en": "ABBINU (A88E): Cabinet fan war",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88F ） ：冷却风扇警告": {
   "en": "ABBINU (A88F): Cooling fan war",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A890 ） ：添加冷却风扇": {
   "en": "ABBINU (A890): Add. cooling fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A890): Add. cool. fan"
   ],
   "repaired": false
  },
  "ABBINU （ A8B0 ） ：信号监视": {
   "en": "ABBINU (A8B0): Signal supervis",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A981 ） ：外部报警1": {
   "en": "ABBINU (A981): external warning 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A981): Ext. warning 1"
   ],
   "repaired": false
  },
  "ABBINU （ A982 ） ：外部报警2": {
   "en": "ABBINU (A982): external warning 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A982): Ext. warning 2"
   ],
   "repaired": false
  },
  "ABBINU （ A983 ） ：外部报警3": {
   "en": "ABBINU (A983): external warning 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A983): Ext. warning 3"
   ],
   "repaired": false
  },
  "ABBINU （ A984 ） ：外部报警4": {
   "en": "ABBINU (A984): external warning 4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A984): Ext. warning 4"
   ],
   "repaired": false
  },
  "ABBINU （ A985 ） ：外部报警5": {
   "en": "ABBINU (A985): external warning 5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A985): Ext. warning 5"
   ],
   "repaired": false
  },
  "ABBINU （ AF8C ） ：过程PID SLP": {
   "en": "ABBINU (AF8C): Process PID slp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ AFE1 ） ：紧急停止OFF2": {
   "en": "ABBINU (AFE1): emergency. stop off2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (AFE1): Emer. stop off2"
   ],
   "repaired": false
  },
  "ABBINU （ AFE2 ） ：紧急停止OFF1": {
   "en": "ABBINU (AFE2): emergency. stop off1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (AFE2): Emer. stop off1"
   ],
   "repaired": false
  },
  "ABBINU （ AFEB ） ：允许运行错过": {
   "en": "ABBINU (AFEB): Run enable miss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ AFF6 ） ：识别运行电机": {
   "en": "ABBINU (AFF6): Ident run Motor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ AFF7 ） ：调相": {
   "en": "ABBINU (AFF7): Autophasing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ AFAA ） ：自动复位的故障": {
   "en": "ABBINU (AFAA): Autoreset fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ B5A0 ） ： STO事件": {
   "en": "ABBINU (B5A0): STO event",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ FF61 ） ：身份证运行不排版": {
   "en": "ABBINU (FF61): ID run not comp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ FF81 ） ：FB的强迫跳闸": {
   "en": "ABBINU (FF81): FB A force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ FF82 ） ： FBB强迫跳闸": {
   "en": "ABBINU (FF82): FB B force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ FF8E ） ： EFB强迫跳闸": {
   "en": "ABBINU (FF8E): EFB force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABB ACS880 ISU ： 失败未知": {
   "en": "ABB ACS880 ISU: FAIL UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E00 ） ：过电流输出": {
   "en": "ABBISU (2E00): Overcur. Output",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E02 ） ：电机电缆SC": {
   "en": "ABBISU (2E02): Motor cable SC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E03 ） ：偏移校准": {
   "en": "ABBISU (2E03): calibration offset",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (2E03): Calib offset"
   ],
   "repaired": false
  },
  "ABBISU （ 2E04 ） ： IGBT的过载": {
   "en": "ABBISU (2E04): IGBT overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E05 ） ：BU电流差异": {
   "en": "ABBISU (2E05): BU currententent diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (2E05): BU current diff"
   ],
   "repaired": false
  },
  "ABBISU （ 2E06 ） ：BU接地泄露": {
   "en": "ABBISU (2E06): BU earth leakag",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E08 ）：外部接地": {
   "en": "ABBISU (2E08): External earth",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E00 ） ： INP 缺相": {
   "en": "ABBISU (3E00): Inp. phase loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E04 ） ：直流过压": {
   "en": "ABBISU (3E04): DC overvoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E05 ） ：直流欠压": {
   "en": "ABBISU (3E05): DC undervoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E06 ） ：BU直流母线差异": {
   "en": "ABBISU (3E06): BU DC link diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E07 ） ：BU电压差异": {
   "en": "ABBISU (3E07): BU voltage diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E08 ） ： LSU变动的直流连接": {
   "en": "ABBISU (3E08): LSU chg. DClink",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E09 ） ： LSU变动审讯": {
   "en": "ABBISU (3E09): LSU chg. trial",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E0A ） ： LSU变动母线": {
   "en": "ABBISU (3E0A): LSU chg. busbar",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E0D ） ：过压故障": {
   "en": "ABBISU (3E0D): Overvoltage Fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (3E0D): Overvolt. Fault"
   ],
   "repaired": false
  },
  "ABBISU （ 3E0E ） ：电压过低故障": {
   "en": "ABBISU (3E0E): Undervolt fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 4E00 ） ： IGBT过热": {
   "en": "ABBISU (4E00): IGBT overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E00): IGBT overtemp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E01 ） ：制冷功率": {
   "en": "ABBISU (4E01): Cooling Power",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 4E02 ） ： IGBT温度": {
   "en": "ABBISU (4E02): IGBT temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E02): IGBT temp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E03 ） ：温度过高": {
   "en": "ABBISU (4E03): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E03): Excess temp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E04 ） ：温度过高": {
   "en": "ABBISU (4E04): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E04): Excess temp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E05 ）：外部温度": {
   "en": "ABBISU (4E05): External temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E05): External temp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E06 ） ：柜内温度": {
   "en": "ABBISU (4E06): Cabinet temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (4E06): Cabinet temp."
   ],
   "repaired": false
  },
  "ABBISU （ 4E07 ） ：控制板": {
   "en": "ABBISU (4E07): Control board",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E00 ） ：冷却风扇卡住": {
   "en": "ABBISU (5E00): cooling fan stuck",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E00): Cool. fan stuck"
   ],
   "repaired": false
  },
  "ABBISU （ 5E01 ） ：辅助风扇坏": {
   "en": "ABBISU (5E01): Aux. fan broken",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E02 ） ：外箱尺寸线路": {
   "en": "ABBISU (5E02): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E02 ） ： STO硬件故障": {
   "en": "ABBISU (5E02): STO HW failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E03 ） ：安全转矩关闭": {
   "en": "ABBISU (5E03): Safe torque off",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 202 D 整流器温度高": {
   "en": "Generator inverter: 202 D rectif.temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 202 D rectif.temp high"
   ],
   "repaired": false
  },
  "ABBISU （ 5E04 ） ： PU逻辑错误": {
   "en": "ABBISU (5E04): PU logic error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 204 Fieldb.coup.1亏损": {
   "en": "Generator inverter: 204 Fieldb.coup.1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 204 Fieldb.coup.1 loss"
   ],
   "repaired": false
  },
  "ABBISU （ 5E05 ） ：等级ID错误": {
   "en": "ABBISU (5E05): Rating ID error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E06 ） ：主接触器": {
   "en": "ABBISU (5E06): Main contactor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E07 ） ： PU通讯": {
   "en": "ABBISU (5E07): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E07): PU comm."
   ],
   "repaired": false
  },
  "ABBISU （ 5E08 ） ：功率单元CONN": {
   "en": "ABBISU (5E08): Power unit conn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E09 ） ： PU通讯": {
   "en": "ABBISU (5E09): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E09): PU comm."
   ],
   "repaired": false
  },
  "ABBISU （ 5E0B ） ： PU板PU失败": {
   "en": "ABBISU (5E0B): PU board PUfail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E0C ） ：外箱尺寸线路": {
   "en": "ABBISU (5E0C): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E0D ） ： PU通讯": {
   "en": "ABBISU (5E0D): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E0D): PU comm."
   ],
   "repaired": false
  },
  "ABBISU （ 5E0E ） ：降低运行索姆": {
   "en": "ABBISU (5E0E): Reduced run Som",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E0F ） ： PU状态反馈": {
   "en": "ABBISU (5E0F): PU state feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E0F): PU state feedb."
   ],
   "repaired": false
  },
  "ABBISU （ 5E10 ） ：充电的反馈": {
   "en": "ABBISU (5E10): Charging feedback.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (5E10): Charging feedb."
   ],
   "repaired": false
  },
  "ABBISU （ 5E11 ） ：未知PU": {
   "en": "ABBISU (5E11): Unknown PU",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 5E13 ） ：辅助线路": {
   "en": "ABBISU (5E13): Aux. Circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E00 ） ： FPGA版本": {
   "en": "ABBISU (6E00): FPGA version",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E01 ） ： FBA映射文件": {
   "en": "ABBISU (6E01): FBA A map file",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E02 ） ： FBAB映射文件": {
   "en": "ABBISU (6E02): FBA B map file",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E03 ） ：工作超负荷": {
   "en": "ABBISU (6E03): Task overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E04 ） ：堆栈溢出": {
   "en": "ABBISU (6E04): Stack overflow",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E05 ） ：内部文件加载": {
   "en": "ABBISU (6E05): internal file load",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (6E05): Int. file load"
   ],
   "repaired": false
  },
  "ABBISU （ 6E07 ） ：应用程序加载": {
   "en": "ABBISU (6E07): App. loading",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E08 ） ：内存分离": {
   "en": "ABBISU (6E08): Memory Detached",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E09 ） ：内部S软件故障": {
   "en": "ABBISU (6E09): internal SSW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (6E09): Int. SSW fault"
   ],
   "repaired": false
  },
  "ABBISU （ 6E0A ） ：用户设置故障": {
   "en": "ABBISU (6E0A): User Set Fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E0B ） ：内核超载": {
   "en": "ABBISU (6E0B): Kernel overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E0C ） ：参数系统": {
   "en": "ABBISU (6E0C): Parameter sys.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E0D ） ： FBA的参数": {
   "en": "ABBISU (6E0D): FBA A parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E0E ） ： FBA B参数": {
   "en": "ABBISU (6E0E): FBA B parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E0F ） ： EFB通讯亏损": {
   "en": "ABBISU (6E0F): EFB comm loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E10 ） ： EFB配置文件": {
   "en": "ABBISU (6E10): EFB config file",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E11 ） ： EFB无效": {
   "en": "ABBISU (6E11): EFB invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E12 ） ： EFB负载故障": {
   "en": "ABBISU (6E12): EFB load fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E13 ） ： EFB故障2": {
   "en": "ABBISU (6E13): EFB fault 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E14 ） ： EFB故障3": {
   "en": "ABBISU (6E14): EFB fault 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A82 ） ： FSO_错误_IO": {
   "en": "ABBISU (7A82): FSO_Faults_IO",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A83 ） ： FSO_错误_STO": {
   "en": "ABBISU (7A83): FSO_Faults_STO",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A84 ） ： FSO_错误_STOR": {
   "en": "ABBISU (7A84): FSO_Faults_STOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A85 ） ： FSO_错误_通讯": {
   "en": "ABBISU (7A85): FSO_Faults_COMM",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A86 ） ： FSO_错误_SBUS": {
   "en": "ABBISU (7A86): FSO_Faults_SBUS",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A87 ） ： FSO_错误_CONF": {
   "en": "ABBISU (7A87): FSO_Faults_CONF",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A88 ） ： FSO_错误_SFEN": {
   "en": "ABBISU (7A88): FSO_Faults_SFEN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A89 ） ： FSO_错误_ENCL": {
   "en": "ABBISU (7A89): FSO_Faults_ENCL",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7A8A ） ： FSO_错误_温度": {
   "en": "ABBISU (7A8A): FSO_Faults_TEMP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7E00 ） ：选件模块通讯": {
   "en": "ABBISU (7E00): Opt module comm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7E01 ） ：面板亏损": {
   "en": "ABBISU (7E01): Panel loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7E0B ） ： FBA A通信": {
   "en": "ABBISU (7E0B): FBA A Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (7E0B): FBA A comm."
   ],
   "repaired": false
  },
  "ABBISU （ 7E0C ） ： FBA B通信": {
   "en": "ABBISU (7E0C): FBA B Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (7E0C): FBA B comm."
   ],
   "repaired": false
  },
  "ABBISU （ AE00 ） ： 电流校准": {
   "en": "ABBISU (AE00): currentent calibration.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE00): Current calib."
   ],
   "repaired": false
  },
  "ABBISU （ AE01 ） ： 过电流 OUTP": {
   "en": "ABBISU (AE01): Overcurrentent Outp.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE01): Overcurr. Outp."
   ],
   "repaired": false
  },
  "ABBISU （ AE02 ） ：接接地漏电电.IGBT": {
   "en": "ABBISU (AE02): Earth leak.IGBT",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE03 ） ：短路.IGBT": {
   "en": "ABBISU (AE03): Short circ.IGBT",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE04 ） ： IGBT的过载": {
   "en": "ABBISU (AE04): IGBT overload",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE05 ） ：BU电流差异": {
   "en": "ABBISU (AE05): BU currententent diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE05): BU current diff"
   ],
   "repaired": false
  },
  "ABBISU （ AE06 ） ：BU接地泄漏": {
   "en": "ABBISU (AE06): BU earth leak.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE07 ） ：BU换流": {
   "en": "ABBISU (AE07): BU commutation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE09 ） ：直流过压": {
   "en": "ABBISU (AE09): DC overvoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE0A ） ：直流欠压": {
   "en": "ABBISU (AE0A): DC undervoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE0B ） ：直流充电不": {
   "en": "ABBISU (AE0B): DC not charged",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE0C ） ：BU直流母线差异": {
   "en": "ABBISU (AE0C): BU DC link diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE0D ） ：BU电压差异": {
   "en": "ABBISU (AE0D): BU voltage diff",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE0E ） ： 不正确的温度": {
   "en": "ABBISU (AE0E): Incorrectect temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE0E): Incorrect temp."
   ],
   "repaired": false
  },
  "ABBISU （ AE0F ）：外部温度": {
   "en": "ABBISU (AE0F): External temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE0F): External temp."
   ],
   "repaired": false
  },
  "ABBISU （ AE10 ） ：分机温度1警告": {
   "en": "ABBISU (AE10): Ext Tmp1 warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE11 ） ：分机温度2警告": {
   "en": "ABBISU (AE11): Ext Tmp2 warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE12 ） ： IGBT过热": {
   "en": "ABBISU (AE12): IGBT overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE12): IGBT overtemp."
   ],
   "repaired": false
  },
  "ABBISU （ AE13 ） ：冷却": {
   "en": "ABBISU (AE13): Cooling",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE14 ） ：温度过高": {
   "en": "ABBISU (AE14): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE14): Excess temp."
   ],
   "repaired": false
  },
  "ABBISU （ AE15 ） ：温度过高": {
   "en": "ABBISU (AE15): Excess temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE15): Excess temp."
   ],
   "repaired": false
  },
  "ABBISU （ AE16 ） ： IGBT温度": {
   "en": "ABBISU (AE16): IGBT temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE16): IGBT temp."
   ],
   "repaired": false
  },
  "ABBISU （ AE17 ） ： PU通讯": {
   "en": "ABBISU (AE17): PU Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE17): PU comm."
   ],
   "repaired": false
  },
  "ABBISU （ AE18 ） ：安全转矩关闭": {
   "en": "ABBISU (AE18): Safe torque off",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE19 ） ：外箱尺寸线路": {
   "en": "ABBISU (AE19): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE1A ） ： PU板PU失败": {
   "en": "ABBISU (AE1A): PU board PUfail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE1B ） ： PU 通讯U": {
   "en": "ABBISU (AE1B): PU commu.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE1C ） ：外箱尺寸线路": {
   "en": "ABBISU (AE1C): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE1D ） ：外箱尺寸电路": {
   "en": "ABBISU (AE1D): MEASCIRCuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE1D): Meas circuit"
   ],
   "repaired": false
  },
  "ABBISU （ AE1E ） ： PU状态FB": {
   "en": "ABBISU (AE1E): PU state fb.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE1F ） ：充电FB": {
   "en": "ABBISU (AE1F): Charging fb.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE20 ）：内部软件错误": {
   "en": "ABBISU (AE20): Internal SW err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE2F ） ：扩展I / O": {
   "en": "ABBISU (AE2F): Extension I/O",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE33 ） ： FSO警告": {
   "en": "ABBISU (AE33): FSO Warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE51 ） ：外部报警1": {
   "en": "ABBISU (AE51): external warning 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE51): Ext. warning 1"
   ],
   "repaired": false
  },
  "ABBISU （ AE52 ） ：外部报警2": {
   "en": "ABBISU (AE52): external warning 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE52): Ext. warning 2"
   ],
   "repaired": false
  },
  "ABBISU （ AE57 ） ：自动复位的故障": {
   "en": "ABBISU (AE57): Autoreset fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE58 ） ：紧急停止OFF2": {
   "en": "ABBISU (AE58): emergency. stop off2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE58): Emer. stop off2"
   ],
   "repaired": false
  },
  "ABBISU （ AE59 ） ：紧急停止OFF1": {
   "en": "ABBISU (AE59): emergency. stop off1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE59): Emer. stop off1"
   ],
   "repaired": false
  },
  "ABBISU （ AE5A ） ：启用启动SI": {
   "en": "ABBISU (AE5A): Enable start si",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE5B ） ：允许运行错过": {
   "en": "ABBISU (AE5B): Run enable miss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE5C ） ：外部电源": {
   "en": "ABBISU (AE5C): External power",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE5F ） ：温度警告": {
   "en": "ABBISU (AE5F): Temperature War",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE60 ） ：控制板": {
   "en": "ABBISU (AE60): Control board",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ FF81 ） ：FB的强迫跳闸": {
   "en": "ABBISU (FF81): FB A force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ FF82 ） ： FBB强迫跳闸": {
   "en": "ABBISU (FF82): FB B force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ FF8E ） ： EFB强迫跳闸": {
   "en": "ABBISU (FF8E): EFB force trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "I-Reg模组故障": {
   "en": "I-Reg modul fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "溢出登录失败": {
   "en": "Overflow in faillog",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "软件算法故障": {
   "en": "Software algorithm fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 302 Net Bridge Interl.": {
   "en": "Generator inverter: 302 Net Bridge Interl.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 302 Net Bridge Interl."
   ],
   "repaired": false
  },
  "在CAN总线模块控制器错误": {
   "en": "Controller error in CAN module",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "IO配置错误": {
   "en": "IO Configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "不间断电源的故障": {
   "en": "UPS-failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "不间断电源电池故障": {
   "en": "UPS battery failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用电池错误": {
   "en": "Backup battery error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停断电": {
   "en": "Stop for powerdown",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "不间断电源电池低电位": {
   "en": "UPS Battery Low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "不间断电源的旁路错误": {
   "en": "UPS Bypass error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾探测器报警": {
   "en": "Smokedetector alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "底盒有烟雾": {
   "en": "Smoke in bottom box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "顶部有烟雾": {
   "en": "Smoke in the top",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变压器室有烟雾": {
   "en": "Smoke in transformer room",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机舱有烟雾": {
   "en": "Smoke in the nacell",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "滤波器中有烟雾": {
   "en": "Smoke in the filter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "逆变器中有烟雾": {
   "en": "Smoke in the inverter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A1箱内有烟雾": {
   "en": "Smoke in the A1 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电弧检测（塔筒）": {
   "en": "Arc detected (tower)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电弧检测（机舱）": {
   "en": "Arc detected (nacelle)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾中的逆变器（ 机舱l ）": {
   "en": "Smoke in the inverter (nacell)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "防火板故障（警告）": {
   "en": "Fire Panel fault (warning)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "防火板故障（错误）": {
   "en": "Fire Panel fault (error)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "程序校验和无效": {
   "en": "Program checksum invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A2柜": {
   "en": "Smoke in the A2 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A3柜": {
   "en": "Smoke in the A3 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟在在A4柜": {
   "en": "Smoke in the A4 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A18柜": {
   "en": "Smoke in the A18 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在塔筒顶部": {
   "en": "Smoke in the top of the tower",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在动力单元": {
   "en": "Smoke in the power unit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在变流器": {
   "en": "Smoke in the Converter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in the converter"
   ],
   "repaired": false
  },
  "烟雾在反应器": {
   "en": "Smoke in the Reactor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A20柜": {
   "en": "Smoke in the A20 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在机舱（后部）": {
   "en": "Smoke in the nacelle (rear)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在变流器滤波器": {
   "en": "Smoke in the Converter filter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in the converter filter"
   ],
   "repaired": false
  },
  "烟雾在发电机冷却系统": {
   "en": "Smoke generator cool air",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在变流器断路器": {
   "en": "Smoke in the Converter breaker",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in the converter breaker"
   ],
   "repaired": false
  },
  "烟雾在A22柜": {
   "en": "Smoke in the A22 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A21柜": {
   "en": "Smoke in the A21 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 17 未识别的pwr in.board": {
   "en": "Grid Inverter: 17 Uident.pwr in.board",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 17 Uident.pwr in.board"
   ],
   "repaired": false
  },
  "并网逆变器： 18历史恢复失败": {
   "en": "Grid Inverter: 18 Hist. restore fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 18 Hist. restore fail"
   ],
   "repaired": false
  },
  "烟雾在A23柜": {
   "en": "Smoke in the A23 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 20 Paramain编辑丢失": {
   "en": "Grid Inverter: 20 Paramain edit lost",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 20 Param. edit lost"
   ],
   "repaired": false
  },
  "过多的热量在机舱中": {
   "en": "Excessive heat in the nacelle",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A24柜": {
   "en": "Smoke in the A24 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在变流器1断路器": {
   "en": "Smoke in Converter 1 breaker",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in converter 1 breaker"
   ],
   "repaired": false
  },
  "烟雾变流器1": {
   "en": "Smoke in Converter 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in converter 1"
   ],
   "repaired": false
  },
  "烟雾在变流器2断路器": {
   "en": "Smoke in Converter 2 breaker",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in converter 2 breaker"
   ],
   "repaired": false
  },
  "烟雾在变流器2": {
   "en": "Smoke in Converter 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Smoke in converter 2"
   ],
   "repaired": false
  },
  "烟雾在风扇转换盒": {
   "en": "Smoke in the Fan Converter box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A26柜": {
   "en": "Smoke in the A26 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在塔筒底部": {
   "en": "Smoke in bottom of the tower",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在变压器单元": {
   "en": "Smoke in the transformer unit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "AFFS系统故障": {
   "en": "AFFS system fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "AFFS检测起火": {
   "en": "AFFS fire detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "AFFS灭火剂释放": {
   "en": "AFFS extinguishant released",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "AFFS IO配置错误": {
   "en": "AFFS IO config. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在过渡件": {
   "en": "Smoke in the transition piece",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A27箱": {
   "en": "Smoke in the A27 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "烟雾在A35箱": {
   "en": "Smoke in the A35 box",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A1温度过高": {
   "en": "Temperature in A1 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A2温度过高": {
   "en": "Temperature in A2 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A2（网络）温度过高": {
   "en": "temperature in A2 (network) too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A2 (network) too high"
   ],
   "repaired": false
  },
  "A3（左）左过高": {
   "en": "temperature in A3 (left) too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A3 (left) too high"
   ],
   "repaired": false
  },
  "A3（右）温度过高": {
   "en": "temperature in A3 (right) too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A3 (right) too high"
   ],
   "repaired": false
  },
  "A4温度过高": {
   "en": "Temperature in A4 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A4环境温度高": {
   "en": "A4 ambient temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8.1温度过高": {
   "en": "Temperature in A8.1 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8.1电容温度高": {
   "en": "A8.1 capacitor temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8.1 capacitor temp. high"
   ],
   "repaired": false
  },
  "A8.2温度过高": {
   "en": "Temperature in A8.2 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8.2电容温度高": {
   "en": "A8.2 capacitor temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8.2 capacitor temp. high"
   ],
   "repaired": false
  },
  "A9温度过高": {
   "en": "Temperature in A9 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "晶闸管温度高": {
   "en": "Thyristors temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A1 UPS温度高": {
   "en": "A1 UPS temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电缆温度过高": {
   "en": "Cable temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电缆梯架温度过高": {
   "en": "Cable ladder temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cable ladder temp. too high"
   ],
   "repaired": false
  },
  "A8环境温度高": {
   "en": "A8 ambient temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8电容温度高": {
   "en": "A8 capacitor temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8 capacitor temp. high"
   ],
   "repaired": false
  },
  "A1温度（右）过高": {
   "en": "temperature in A1 (right) too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A1 (right) too high"
   ],
   "repaired": false
  },
  "A10温度过高": {
   "en": "Temperature in A10 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A15温度过高": {
   "en": "Temperature in A15 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A16温度过高": {
   "en": "Temperature in A16 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A18温度过高": {
   "en": "Temperature in A18 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A21温度过高": {
   "en": "Temperature in A21 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器断路器温度高": {
   "en": "Converter breaker temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A23温度过高": {
   "en": "Temperature in A23 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A24温度过高": {
   "en": "Temperature in A24 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器1断路器温度高": {
   "en": "Converter 1 breaker temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器2断路器温度高": {
   "en": "Converter 2 breaker temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机断路器1温度高": {
   "en": "Generator breaker 1 temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator breaker 1 temp. high"
   ],
   "repaired": false
  },
  "发电机断路器2温度高": {
   "en": "Generator breaker 2 temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Generator breaker 2 temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 69 CONF 跳闸": {
   "en": "Grid Inverter: 69 conf. trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 69 conf. trip"
   ],
   "repaired": false
  },
  "并网逆变器： 70 Datumize错误": {
   "en": "Grid Inverter: 70 Datumize error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 70 Datumize error"
   ],
   "repaired": false
  },
  "风扇转换器温度过高": {
   "en": "temperature in Fan Converter too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in Fan conv too high"
   ],
   "repaired": false
  },
  "A26温度太高": {
   "en": "Temperature in A26 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A3 不间断电源 /变压器温度过高": {
   "en": "temperature in A3 UPS/Transformer too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A3 UPS/Trafo too high"
   ],
   "repaired": false
  },
  "A3控制部分温度高": {
   "en": "temperature in A3 Control section hi",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A3 Control section hi"
   ],
   "repaired": false
  },
  "A23变压器部分温度高": {
   "en": "temperature in A23 Transformer section hi.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A23 Trafo section hi."
   ],
   "repaired": false
  },
  "A24功率部分温度高": {
   "en": "temperature in A23 Power section hi.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Temp. in A23 Power section hi."
   ],
   "repaired": false
  },
  "A27温度太高": {
   "en": "Temperature in A27 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A1温度传感器错误": {
   "en": "A1 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A1环境温度传感器故障": {
   "en": "A1 ambient temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A1 ambient temp. sensor error"
   ],
   "repaired": false
  },
  "A2温度传感器错误": {
   "en": "A2 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 81 D4转跳闸": {
   "en": "Grid Inverter: 81 D4 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 81 D4 ext trip"
   ],
   "repaired": false
  },
  "A2 （网络） 温度传感器错误": {
   "en": "A2 (network) temperaturesensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A2 (network) temp.sensor error"
   ],
   "repaired": false
  },
  "A3温度（左）传感器错误": {
   "en": "A3 temperature (left) sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A3 temp. (left) sensor error"
   ],
   "repaired": false
  },
  "A3温度（右）传感器错误": {
   "en": "A3 temperature (right) sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A3 temp. (right) sensor error"
   ],
   "repaired": false
  },
  "A4温度传感器错误": {
   "en": "A4 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A4环境温度传感器故障": {
   "en": "A4 ambient temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A4 ambient temp. sensor error"
   ],
   "repaired": false
  },
  "A8.1电容温度传感器错误": {
   "en": "A8.1 cap. temperature sensor errror",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8.1 cap. temp. sensor errror"
   ],
   "repaired": false
  },
  "A8.1温度传感器错误": {
   "en": "A8.1 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8.2电容温度传感器错误": {
   "en": "A8.2 cap. temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8.2 cap. temp. sensor error"
   ],
   "repaired": false
  },
  "A8.2温度传感器错误": {
   "en": "A8.2 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A9温度传感器错误": {
   "en": "A9 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A8外部温度传感器错误": {
   "en": "A8 external temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8 external temp. sensor error"
   ],
   "repaired": false
  },
  "并网逆变器： 93频率": {
   "en": "Grid Inverter: 93 SFE freq out of lim",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 93 SFE freq out of lim"
   ],
   "repaired": false
  },
  "A8电容温度传感器错误": {
   "en": "A8 cap. temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A8 cap. temp. sensor error"
   ],
   "repaired": false
  },
  "A1温度（右）传感器错误": {
   "en": "A1 temperature (right) sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A1 temp. (right) sensor error"
   ],
   "repaired": false
  },
  "A10温度传感器错误": {
   "en": "A10 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 97 Prerel  EXP": {
   "en": "Grid Inverter: 97 Prerel. exp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 97 Prerel. exp"
   ],
   "repaired": false
  },
  "A15温度传感器错误": {
   "en": "A15 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A16温度传感器错误": {
   "en": "A16 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A18温度传感器错误": {
   "en": "A18 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A20温度传感器错误": {
   "en": "A20 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在A20温度太高": {
   "en": "Temperature in A20 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A22温度传感器错误": {
   "en": "A22 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "在A22温度太高": {
   "en": "Temperature in A22 too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A21温度传感器错误": {
   "en": "A21 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器断路器传感器错误": {
   "en": "Converter breaker sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A23温度传感器错误": {
   "en": "A23 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A24温度传感器错误": {
   "en": "A24 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器1断路器传感器错误": {
   "en": "Converter 1 breaker sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器2断路器传感器错误": {
   "en": "Converter 2 breaker sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机断路器1温度传感器错误": {
   "en": "Generator breaker 1 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. breaker 1 temp. sens. err"
   ],
   "repaired": false
  },
  "发电机断路器2温度传感器错误": {
   "en": "Generator breaker 2 temperature sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gen. breaker 2 temp. sens. err"
   ],
   "repaired": false
  },
  "风扇变流器温度传感器错误": {
   "en": "Fan Converter temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Fan Conv temp. sensor error"
   ],
   "repaired": false
  },
  "A26温度传感器错误": {
   "en": "A26 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A3温度不间断电源 /变压器传感器错误": {
   "en": "A3 temperature UPS/Transformer sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A3 temp. UPS/Trafo sens. error"
   ],
   "repaired": false
  },
  "A3温度控制部分传感器": {
   "en": "A3 temperature Control section sensor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A3 temp. Control section sens."
   ],
   "repaired": false
  },
  "A23变压器部传感器错误": {
   "en": "A23 Transformer section sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "A23 Trafo section sensor error"
   ],
   "repaired": false
  },
  "A23电源部分传感器错误": {
   "en": "A23 Power section sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "A27温度传感器错误": {
   "en": "A27 temperature sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-1模块的初始化错误": {
   "en": "CAN:IO-1 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-2模块的初始化错误": {
   "en": "CAN:IO-2 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-3模块的初始化错误": {
   "en": "CAN:IO-3 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ：通用模块的初始化错误": {
   "en": "CAN:GM  module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ：集线器模块初始化错误": {
   "en": "CAN:Hub module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-1通讯错误": {
   "en": "CAN:IO-1 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 126 FBC 3丢失": {
   "en": "Grid Inverter: 126 FBC 3 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 126 FBC 3 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 127备用 在使用": {
   "en": "Grid Inverter: 127 Backup par. in use",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 127 Backup par. in use"
   ],
   "repaired": false
  },
  "CAN总线 ： IO-2通信错误": {
   "en": "CAN:IO-2 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-3通信错误": {
   "en": "CAN:IO-3 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ：通用通讯错误": {
   "en": "CAN:GM  Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ：集线器通信错误": {
   "en": "CAN:Hub Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-4模块的初始化错误": {
   "en": "CAN:IO-4 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-4通讯错误": {
   "en": "CAN:IO-4 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-5模块的初始化错误": {
   "en": "CAN:IO-5 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-5通讯错误": {
   "en": "CAN:IO-5 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-6模块初始化错误": {
   "en": "CAN:IO-6 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-6通讯错误": {
   "en": "CAN:IO-6 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-7模块初始化错误": {
   "en": "CAN:IO-7 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-7通信错误": {
   "en": "CAN:IO-7 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GS-1模块的初始化错误": {
   "en": "CAN:GS-1 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GS-1通讯错误": {
   "en": "CAN:GS-1 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GS-2模块的初始化错误": {
   "en": "CAN:GS-2 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GS-2通信错误": {
   "en": "CAN:GS-2 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-8模块的初始化错误": {
   "en": "CAN:IO-8 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-8通信错误": {
   "en": "CAN:IO-8 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-9模块的初始化错误": {
   "en": "CAN:IO-9 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： IO-9通讯错误": {
   "en": "CAN:IO-9 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GM-2模块的初始化错误": {
   "en": "CAN:GM-2 module init. error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线 ： GM-2通信错误": {
   "en": "CAN:GM-2 Communication error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线离线": {
   "en": "CAN Bus offline",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "涡轮序列号无效": {
   "en": "Turbine Serial Number invalid",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MC ： +24 V_传感器or电压降": {
   "en": "MC: +24V_sensor voltage drop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MC ： +5 VA_滤波器t电压降": {
   "en": "MC: +5VA_filt voltage drop",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块1断电": {
   "en": "IO module 1 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块2断电": {
   "en": "IO module 2 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块3断电": {
   "en": "IO module 3 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块4断电": {
   "en": "IO module 4 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块5断电": {
   "en": "IO module 5 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块6断电": {
   "en": "IO module 6 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块7断电": {
   "en": "IO module 7 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "集线器模块检测到断电": {
   "en": "Hub module powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网格模块检测到断电": {
   "en": "Grid module powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到GS1模块断电": {
   "en": "GS1 module powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测GS2模块断电": {
   "en": "GS2 module powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块8断电": {
   "en": "IO module 8 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "检测到IO模块9断电": {
   "en": "IO module 9 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GM检测模块2断电": {
   "en": "GM module 2 powerdown detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "I / O模块软件版本冲突": {
   "en": "I/O module SW ver. Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网格模块的软件版本冲突": {
   "en": "Grid module SW ver. Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "HM模块软件版本冲突": {
   "en": "HM module SW ver. Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GS1模块软件版本冲突": {
   "en": "GS1 module SW ver. Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MC硬件版本冲突": {
   "en": "MC HW-version Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GS2模块软件版本冲突": {
   "en": "GS2 module SW ver. Conflict",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "程序代码修正错误": {
   "en": "Prg. Code Correction Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "RTC存储警告": {
   "en": "RTC Memory warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "末端的手持终端活动": {
   "en": "Extreme hand terminal activity",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线1缓冲区溢出错误": {
   "en": "CAN 1 buffer overrun error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线2缓冲区溢出错误": {
   "en": "CAN 2 buffer overrun error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线3缓冲区溢出错误": {
   "en": "CAN 3 buffer overrun error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "CAN总线4缓冲区溢出错误": {
   "en": "CAN 4 buffer overrun error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，主轴承": {
   "en": "No lubrication, main bearing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "油脂水平低，主轴承": {
   "en": "Grease level low, main bearing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主开关690V切出": {
   "en": "Main switch for 690V cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 ，L-错误": {
   "en": "Mainbreaker, L-error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 ，S-错误": {
   "en": "Mainbreaker, S-error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 ，I-错误": {
   "en": "Mainbreaker, I-error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 ，G-错误": {
   "en": "Mainbreaker, G-error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器 ，温度误差": {
   "en": "Mainbreaker, temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器切出": {
   "en": "MV breaker cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航空警示灯（闪光灯）": {
   "en": "Aviation light warning (FLASH)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航空灯错误（闪存）": {
   "en": "Aviation light error   (FLASH)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Aviation light error(FLASH)"
   ],
   "repaired": false
  },
  "航空灯错误（ LED）": {
   "en": "Aviation light error     (LED)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Aviation light error(LED)"
   ],
   "repaired": false
  },
  "航标警告-最后的灯泡": {
   "en": "Beacon warning-Last bulb",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Beacon warning - Last bulb"
   ],
   "repaired": false
  },
  "航标错误": {
   "en": "Beacon error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "警示灯2 ，航标": {
   "en": "Warning lamp 2, beacon",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标2错误": {
   "en": "Beacon 2 error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器出来-过电流": {
   "en": "Mainbreaker out-overcurrententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainbreaker out - overcurrent"
   ],
   "repaired": false
  },
  "主断路器出来-手动": {
   "en": "Mainbreaker out-manually",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Mainbreaker out - manually"
   ],
   "repaired": false
  },
  "过电流错误， 33千伏": {
   "en": "Overcurrententent error, 33 kV",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Overcurrent error, 33 kV"
   ],
   "repaired": false
  },
  "电弧检测": {
   "en": "Arc detected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 201不合适数据库负载": {
   "en": "Grid Inverter: 201 Unsuit. DB load",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 201 Unsuit. DB load"
   ],
   "repaired": false
  },
  "并网逆变器： 202 D 整流器温度高": {
   "en": "Grid Inverter: 202 D rectif.temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 202 D rectif.temp high"
   ],
   "repaired": false
  },
  "内部继电器错误， A2A62": {
   "en": "Internal relay error, A2A62",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 204 Fieldb.coup.1 loss": {
   "en": "Grid Inverter: 204 Fieldb.coup.1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 204 Fieldb.coup.1 loss"
   ],
   "repaired": false
  },
  "内部继电器错误，西门子": {
   "en": "Internal relay error, Siemens",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Reetec 航标灯 （发光二极管）老旧": {
   "en": "Reetec Aviationlight (LED) old.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light (LED) old."
   ],
   "repaired": false
  },
  "Reetec 航标灯 （ LED）警告": {
   "en": "Reetec Aviationlight (LED) warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light (LED) warning"
   ],
   "repaired": false
  },
  "Reetec 航标灯 （灯泡）发出警告": {
   "en": "Reetec Aviationlight (Lamp) warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light (Lamp) warn."
   ],
   "repaired": false
  },
  "Reetec 航标灯电池警告": {
   "en": "Reetec Aviationlight battery warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light battery warn."
   ],
   "repaired": false
  },
  "Reetec 航标灯供应警告": {
   "en": "Reetec Aviationlight supply warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light supply warn."
   ],
   "repaired": false
  },
  "Reetec 航标灯频率警告": {
   "en": "Reetec Aviationlight Freque. warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Reetec Avi.light Freque. warn."
   ],
   "repaired": false
  },
  "紧急压力钮激活": {
   "en": "Emergencybutton activated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "emergencygencybutton activated"
   ],
   "repaired": true
  },
  "SF6气体压力报警": {
   "en": "SF6 gas pressure warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "备用690V辅助电源": {
   "en": "Backup 690 V Aux-supply",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承润滑不可能": {
   "en": "Main bearing lubrication not possible",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bear. lub. not possible"
   ],
   "repaired": false
  },
  "内部跳闸继电器错误": {
   "en": "Inter tripping relay error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器切出（披露）": {
   "en": "MV breaker cut-out (DisClosed)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器切出（ EarClosed ）": {
   "en": "MV breaker cut-out (EarClosed)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "内部跳闸系统警告": {
   "en": "Inter tripping system warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 220电网损失1": {
   "en": "Grid Inverter: 220 Ethernet 1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 220 Ethernet 1 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 221电网损失2": {
   "en": "Grid Inverter: 221 Ethernet 2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 221 Ethernet 2 loss"
   ],
   "repaired": false
  },
  "航空灯：灯故障": {
   "en": "Aviation light: Lamp faulty",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承温度过高": {
   "en": "Main bearing temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bearing temp. too high"
   ],
   "repaired": false
  },
  "主轴承温度传感器错误": {
   "en": "Main bearing temp sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承（轮毂）温度过高": {
   "en": "Main bearing(hub) temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bear.(hub) temp. too high"
   ],
   "repaired": false
  },
  "主轴承（轮毂）温度传感器错误": {
   "en": "Main bearing(hub) temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bear.(hub) temp sens. err"
   ],
   "repaired": false
  },
  "主轴承（齿轮）温度过高": {
   "en": "Main bearing(gear)temperature too high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bear.(gear)temp. too high"
   ],
   "repaired": false
  },
  "主轴承（齿轮）温度传感器错误": {
   "en": "Main bearing(gear)temp sensor err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main bear.(gear)temp sens. err"
   ],
   "repaired": false
  },
  "中压断路器从可用性": {
   "en": "MV breaker out Availability",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器（ NO）出可用性": {
   "en": "MV breaker(NO) out Availability",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MV breaker(NO) out Avail."
   ],
   "repaired": false
  },
  "BTI双航灯（红色）错误": {
   "en": "BTI dual Aviation light(red) err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "BTI dual avi. light(red) err."
   ],
   "repaired": false
  },
  "BTI双航灯（白色） 错误": {
   "en": "BTI dual Aviation light(white) err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "BTI dual avi. light(white) err"
   ],
   "repaired": false
  },
  "BTI双航灯（ OVP ）错误": {
   "en": "BTI dual Aviation light(OVP) err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "BTI dual avi. light(OVP) err."
   ],
   "repaired": false
  },
  "主轴润滑泵过热": {
   "en": "main B. grease  pump superheated",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "M. B. grease  pump superheated"
   ],
   "repaired": false
  },
  "烟雾探测器故障": {
   "en": "Fog Detector error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标筒配置错误": {
   "en": "Beacon configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MV-断路器 欠电压继电器的错误": {
   "en": "MV-brk. undervoltage relay error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MV-brk. undervolt. relay error"
   ],
   "repaired": false
  },
  "中压断路器跳闸": {
   "en": "MV-breaker tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器SF-6压力误差": {
   "en": "MV-breaker SF-6 pressure error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器配置错误": {
   "en": "MV-breaker configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低压断路器跳闸动作": {
   "en": "LV breaker TRIPPED Action",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MCB电路开路": {
   "en": "MCB circuit is open.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Nav Aid MCB Open error"
   ],
   "repaired": false
  },
  "中压断路器跳闸动作": {
   "en": "MV breaker TRIPPED Action",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器内部继电器错误": {
   "en": "MV-breaker internal relay err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MV-断路器电弧保护报警": {
   "en": "MV-brk arc protection alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MV-断路器保护缺陷": {
   "en": "MV-brk protection defective",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TP开关SF-6压力错误": {
   "en": "TP Switchgear SF-6 pressure error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TP Switchgear SF-6 pres. error"
   ],
   "repaired": false
  },
  "主断路器跳闸": {
   "en": "Main breaker tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main breaker tripped."
   ],
   "repaired": false
  },
  "隔离开关SF-6压力错误": {
   "en": "Disconnector SF-6 pressure err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "电池故障MV-系统": {
   "en": "Battery failure MV-system",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GPS进行导航辅助同步错误": {
   "en": "GPS for Nav. Aids synchronzation. err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GPS for Nav. Aids Sync. err"
   ],
   "repaired": false
  },
  "一般航标筒错误": {
   "en": "General beacon error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "其它的IO配置错误": {
   "en": "Misc IO configuration error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "雷达信标错误": {
   "en": "Racon Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器跳闸1": {
   "en": "Main breaker 1 tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主断路器跳闸2": {
   "en": "Main breaker 2 tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器辅助电源有问题": {
   "en": "MV-breaker Aux. Power error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中压断路器的环境温度低": {
   "en": "MV-breaker Ambient temperature Low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "MV-breaker Ambient Temp. Low"
   ],
   "repaired": false
  },
  "TP开关SF-6的压力发出警告": {
   "en": "TP Switchgear SF-6 pressure warn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "TP Switchgear SF-6 pres. warn."
   ],
   "repaired": false
  },
  "航标灯 ，灯泡故障": {
   "en": "AviLight, Lamp failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，白灯失败": {
   "en": "AviLight,White lantern failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，GPS 同步报警": {
   "en": "AviLight, GPS synchronzation alarm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "AviLight, GPS sync alarm"
   ],
   "repaired": false
  },
  "航标灯 ， LED故障": {
   "en": "AviLight, LED failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，红灯失败": {
   "en": "AviLight, Red lantern failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ， LED岁": {
   "en": "AviLight, LED old",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，频率": {
   "en": "AviLight, Frequency",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ， OVP状态": {
   "en": "AviLight, OVP status",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，电源故障": {
   "en": "AviLight, Failure supply",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，电池故障": {
   "en": "AviLight, Failure battery",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "主轴承温度警告": {
   "en": "Main Bear temperature Warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main Bear Temp. Warning"
   ],
   "repaired": false
  },
  "主轴承集线器温度警告": {
   "en": "Main Bear Hub temperature Warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main Bear Hub Temp. Warning"
   ],
   "repaired": false
  },
  "主轴承齿轮温度警告": {
   "en": "Main Bear Gear temperature Warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Main Bear Gear Temp. Warning"
   ],
   "repaired": false
  },
  "航标灯 ，灯泡1失效": {
   "en": "AviLight, Lamp 1 failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，灯泡2失效": {
   "en": "AviLight, Lamp 2 failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，保险丝缺陷": {
   "en": "AviLight, Fuse defect",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，机舱灯故障": {
   "en": "AviLight, Nacelle lamp failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "航标灯 ，塔筒灯失效": {
   "en": "AviLight, Tower light failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "直升机航标筒-指示灯故障": {
   "en": "Helicopter Beacon-Lamp fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Helicopter Beacon - Lamp fault"
   ],
   "repaired": false
  },
  "测试软件-不适用于运行": {
   "en": "Test-SW-Not for operation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Test-SW - Not for operation"
   ],
   "repaired": false
  },
  "网侧跌落测试活跃": {
   "en": "Grid drop test active",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "峰值能量降低功耗警告": {
   "en": "Peak energy reduced power warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "峰值能量降低音调警告": {
   "en": "Peak energy reduced pitch warn",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "桨叶A校准循环错误": {
   "en": "circle pitch bladeA calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA calib err"
   ],
   "repaired": false
  },
  "桨叶A偏移循环错误": {
   "en": "circle pitch bladeA offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA offset err"
   ],
   "repaired": false
  },
  "桨叶A锁定循环故障": {
   "en": "circle pitch bladeA spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA spike err"
   ],
   "repaired": false
  },
  "桨叶A闸门循环故障": {
   "en": "circle pitch bladeA gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeA gate err"
   ],
   "repaired": false
  },
  "桨叶B校准循环错误": {
   "en": "circle pitch bladeB calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB calib err"
   ],
   "repaired": false
  },
  "桨叶B偏移循环错误": {
   "en": "circle pitch bladeB offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB offset err"
   ],
   "repaired": false
  },
  "桨叶B锁定循环故障": {
   "en": "circle pitch bladeB spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB spike err"
   ],
   "repaired": false
  },
  "桨叶B闸门循环故障": {
   "en": "circle pitch bladeB gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeB gate err"
   ],
   "repaired": false
  },
  "桨叶C校准循环错误": {
   "en": "circle pitch bladeC calibration err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC calib err"
   ],
   "repaired": false
  },
  "桨叶C偏移循环错误": {
   "en": "circle pitch bladeC offset err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC offset err"
   ],
   "repaired": false
  },
  "桨叶C锁定循环故障": {
   "en": "circle pitch bladeC spike err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC spike err"
   ],
   "repaired": false
  },
  "桨叶C闸门循环故障": {
   "en": "circle pitch bladeC gate err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch bladeC gate err"
   ],
   "repaired": false
  },
  "循环桨距相电流错误": {
   "en": "circle pitch Phase cur err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Phase cur err"
   ],
   "repaired": false
  },
  "循环桨距最大负荷叶片A": {
   "en": "circle pitch Max load blade A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade A"
   ],
   "repaired": false
  },
  "循环桨距最大负荷叶片B": {
   "en": "circle pitch Max load blade B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade B"
   ],
   "repaired": false
  },
  "循环桨距最大负荷刀片C": {
   "en": "circle pitch Max load blade C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Cyclic Pitch Max load blade C"
   ],
   "repaired": false
  },
  "变流器冷却故障": {
   "en": "Converter cooling Malfunction",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器：  302 Net Bridge Interl.": {
   "en": "Grid Inverter: 302 Net Bridge Interl.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 302 Net Bridge Interl."
   ],
   "repaired": false
  },
  "测试-软件只允许怠速": {
   "en": "Test-Sw only idling allowed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变流器冷却NAC故障": {
   "en": "Converter cooling Nac Malfunction",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooling Nac Malfunction"
   ],
   "repaired": false
  },
  "变流器冷却NAC干燥器模式": {
   "en": "Converter cooling Nac Dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooling Nac Dryer mode"
   ],
   "repaired": false
  },
  "类型测试软件-安装": {
   "en": "Type Test SW-Installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Type Test SW - Installed"
   ],
   "repaired": false
  },
  "液压油太热不能启动": {
   "en": "Hydrolic oil too warm to start",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号-Stop20 Watero 制动": {
   "en": "Type Test-Stop20 Watero. brake",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Type Test - Stop20 w.o. brake"
   ],
   "repaired": false
  },
  "变流器冷却sys.1吹风机模式": {
   "en": "Converter cooling sys.1 Dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooling sys.1 Dryer mode"
   ],
   "repaired": false
  },
  "变流器冷却sys.2吹风机模式": {
   "en": "Converter cooling sys.2 Dryer mode",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Conv. cooling sys.2 Dryer mode"
   ],
   "repaired": false
  },
  "发电机转速峰值时间超过": {
   "en": "GenRpm spike duration exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "S20 ， S30期间变流器跳闸": {
   "en": "Converter trip during S20, S30",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变频器跳闸制动禁用": {
   "en": "Converter trip brake disabled",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "机械制动禁用": {
   "en": "Mechanical brake disabled",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号测试导致的停机类型10": {
   "en": "StopType 10 for TypeTest",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号测试导致的停机类型20": {
   "en": "StopType 20 for TypeTest",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号测试导致的停机类型30": {
   "en": "StopType 30 for TypeTest",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号测试导致的停机类型40": {
   "en": "StopType 40 for TypeTest",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "型号测试导致的停机类型50": {
   "en": "StopType 50 for TypeTest",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油解冻热切出": {
   "en": "GearOilDefrost thermic cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "轮毂中检测到松动部件": {
   "en": "Loose Object Detected in Hub",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "DLO事件中能量超限": {
   "en": "Energy in DLO event exceeded",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "停止， 校准传感器": {
   "en": "Stopped, calibrationrating sensors",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Stopped, calibrating sensors"
   ],
   "repaired": false
  },
  "轻轨停": {
   "en": "LRT stopped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "C润滑备用泵低压": {
   "en": "C lubrication Backup pump low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Backup pump low press."
   ],
   "repaired": false
  },
  "C润滑主泵TOR": {
   "en": "C lubrication Main pump TOR",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "C Lub. Main pump TOR"
   ],
   "repaired": false
  },
  "D润滑无流量ST备用泵": {
   "en": "D lubrication No flow st. backup pump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. No flow st. backup pump"
   ],
   "repaired": false
  },
  "D备用润滑泵低压": {
   "en": "D lubrication Backup pump low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Backup pump low press."
   ],
   "repaired": false
  },
  "AB润滑油低油轴承油槽B错误": {
   "en": "ABlubrication Oil low bear sump B err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bear sump B err"
   ],
   "repaired": false
  },
  "AB润滑油备用泵低压": {
   "en": "ABlubrication Backup pump low Pressure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Backup pump low press."
   ],
   "repaired": false
  },
  "AB润滑油低油轴承油槽A": {
   "en": "ABlubrication Oil low bearing sump A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bearing sump A"
   ],
   "repaired": false
  },
  "AB润滑油油低轴承贮槽A错误": {
   "en": "ABlubrication Oil low bear sump A err",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABLub. Oil low bear sump A err"
   ],
   "repaired": false
  },
  "STIC相关": {
   "en": "STIC related",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "Ireg.模块故障": {
   "en": "Ireg.Module Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "硬件-配置未选择": {
   "en": "HW-profile not selected",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "温度均值最大编号": {
   "en": "Max no. of temperature meanvalues",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "程序验证故障": {
   "en": "Program validation error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "DAM模块未安装": {
   "en": "DAM module not installed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "HTRT在低轴承温度情况下启动": {
   "en": "HTRT active at low amain bearing temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "DG: HTRT at low amb. temp."
   ],
   "repaired": false
  },
  "小发电机热截止，tem": {
   "en": "Thermaincut-off  small gen,tem",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Therm.cut-off small gen,tem"
   ],
   "repaired": false
  },
  "小发电机热截止，ter": {
   "en": "Thermaincut-off  small Generator,ter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Therm.cut-off small gen.,ter"
   ],
   "repaired": false
  },
  "最小发电量切出 的最大编号": {
   "en": "Max no. of min produc. cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "小型发电机高速": {
   "en": "Small generator high speed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "太多的小型发电机高速": {
   "en": "Too many Small Generator high speed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Too many Small gen. high speed"
   ],
   "repaired": false
  },
  "PMG电流传感器错误": {
   "en": "PMG currententent sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "PMG current sensor error"
   ],
   "repaired": false
  },
  "PMG电流传感器跳闸": {
   "en": "PMG currententent sensor tripped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "PMG current sensor tripped"
   ],
   "repaired": false
  },
  "超速VCU-A": {
   "en": "Overspeed VCU-A",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超速VCU-B": {
   "en": "Overspeed VCU-B",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "超速VCU-C": {
   "en": "Overspeed VCU-C",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨偏移误差": {
   "en": "Pitch offset error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨A范围错误": {
   "en": "Pitch A range error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨B范围错误": {
   "en": "Pitch B range error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变桨C范围误差": {
   "en": "Pitch C range error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，叶片A， SYS 2": {
   "en": "No lubrication, blade A, Sys 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，叶片B ，SYS 2": {
   "en": "No lubrication, blade B, Sys 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "无润滑，叶片C， SYS 2": {
   "en": "No lubrication, blade C, Sys 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "齿轮油温度延迟高": {
   "en": "Gear oil delayed temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Gear oil delayed temp. high"
   ],
   "repaired": false
  },
  "齿轮油除霜THERMIC切出": {
   "en": "Gear Oil Defrost thermic cut-out",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GearOilDefrost thermic cut-out"
   ],
   "repaired": false
  },
  "G59错误": {
   "en": "G59 Error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "STATCOM输入映射错误": {
   "en": "Statcom input mapping error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "不合法 首次天气ST配置": {
   "en": "illigal pri weather st. config",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Illigal pri weather st. config"
   ],
   "repaired": false
  },
  "不合法二次的天气ST配置": {
   "en": "illigal sec weather st. config",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Illigal sec weather st. config"
   ],
   "repaired": false
  },
  "WSS操作策略错误": {
   "en": "WSS Operation strategy error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "WSS热的警告略错误": {
   "en": "WSS Heat strategy error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "WSS的错误警告略错误": {
   "en": "WSS Error strategy error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "低扭矩主风能​​温暖": {
   "en": "Low torque Primary Energy warm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque Pri. WSpeed warm"
   ],
   "repaired": false
  },
  "低扭矩一次能源温暖": {
   "en": "Low torque Primary Energy warm",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Low torque Pri. Energy warm"
   ],
   "repaired": false
  },
  "动态PFC错误": {
   "en": "Dynamic PFC error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "PECE变流器1收到警告": {
   "en": "PECe Converter 1 Warning received",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "PECe Conv. 1 Warning received"
   ],
   "repaired": false
  },
  "PECE变流器2收到警告": {
   "en": "PECe Converter 2 Warning received",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "PECe Conv. 2 Warning received"
   ],
   "repaired": false
  },
  "PECE变流器收到警告": {
   "en": "PECe Converter Warning received",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "PECe Conv. Warning received"
   ],
   "repaired": false
  },
  "缺少MCBR密切许可证": {
   "en": "Missing MCBR close permit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器PACK传感器错误": {
   "en": "Grid filter PACK sensor error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器PACK温度误差": {
   "en": "Grid filter PACK temperature error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid filter PACK temp. error"
   ],
   "repaired": false
  },
  "MCB断路器切出错误": {
   "en": "MCB breaker cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MCB断路器1切出错误": {
   "en": "MCB breaker 1 cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MCB断路器2切出错误": {
   "en": "MCB breaker 2 cut-out error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MCB清洗过程中": {
   "en": "MCB cleaning in progresss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "MCB清洗结束": {
   "en": "MCB cleaning ended",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "PMGB清洗过程中": {
   "en": "PMGB cleaning in progresss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "PMGB清洗结束": {
   "en": "PMGB cleaning ended",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "网侧电抗电流钳位": {
   "en": "Grid reactive currententent clamped",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "Grid reactive current clamped"
   ],
   "repaired": false
  },
  "变频器跳闸，一般": {
   "en": "Converter tripped, general",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变频器跳闸，温度": {
   "en": "Converter tripped, temperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "变频器跳闸，自动启动": {
   "en": "Converter tripped, Auto Start",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器：错误是没有定义": {
   "en": "Generator inverter: Error is not defined",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: Error is not defined"
   ],
   "repaired": false
  },
  "发电机逆变器： 1互锁": {
   "en": "Generator inverter: 1 interlock",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 1 interlock"
   ],
   "repaired": false
  },
  "发电机逆变器： 2参考亏损": {
   "en": "Generator inverter: 2 reference loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 2 reference loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 3直流过电压": {
   "en": "Generator inverter: 3 DC overvolts",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 3 DC overvolts"
   ],
   "repaired": false
  },
  "发电机逆变器： 4直流欠电压": {
   "en": "Generator inverter: 4 DC undervolts",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 4 DC undervolts"
   ],
   "repaired": false
  },
  "发电机逆变器： 5定时过电流": {
   "en": "Generator inverter: 5 Timed overcurrententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 5 Timed overcurrent"
   ],
   "repaired": false
  },
  "发电机逆变器： 6过热": {
   "en": "Generator inverter: 6 overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 6 overtemperature"
   ],
   "repaired": false
  },
  "发电机逆变器： 7装置 过电流": {
   "en": "Generator inverter: 7 inst. overcurrententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 7 inst. overcurrent"
   ],
   "repaired": false
  },
  "发电机逆变器： 8 U-相值装置 过电流": {
   "en": "Generator inverter: 8 U-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 8 U-ph inst. overcurr."
   ],
   "repaired": false
  },
  "发电机逆变器： 9 U-相值硬件温度高": {
   "en": "Generator inverter: 9 U-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 9 U-ph HW temp high"
   ],
   "repaired": false
  },
  "发电机逆变器：10V-相装置 过电流": {
   "en": "Generator inverter: 10 V-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 10 V-ph inst. overcurr"
   ],
   "repaired": false
  },
  "发电机逆变器： 11 V-相硬件温度高": {
   "en": "Generator inverter: 11 V-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 11 V-ph HW temp high"
   ],
   "repaired": false
  },
  "发电机逆变器： 12 W-相装置 过电流": {
   "en": "Generator inverter: 12 W-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 12 W-ph inst. overcurr"
   ],
   "repaired": false
  },
  "发电机逆变器： 13 W-相硬件温度高": {
   "en": "Generator inverter: 13 W-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 13 W-ph HW temp high"
   ],
   "repaired": false
  },
  "发电机逆变器： 15接触器15V失败": {
   "en": "Generator inverter: 15 cont. 15V fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 15 cont. 15V fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 16 24V OUTP失败": {
   "en": "Generator inverter: 16 24V outp fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 16 24V outp fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 18历史恢复失败": {
   "en": "Generator inverter: 18 Hist. restore fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 18 Hist. restore fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 19新的PCB": {
   "en": "Generator inverter: 19 New PCB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 19 New PCB"
   ],
   "repaired": false
  },
  "INU错误： 过 软件FREQ （ FF55 ）": {
   "en": "INU ERR: OVER SWFREQ (FF55)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 过 电流 （ 2310）": {
   "en": "INU ERR: OVER currentENT (2310)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: OVER CURRENT (2310)"
   ],
   "repaired": false
  },
  "发电机逆变器： 21 MTRIP": {
   "en": "Generator inverter: 21 MTRIP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 21 MTRIP"
   ],
   "repaired": false
  },
  "发电机逆变器： 22电机I2T": {
   "en": "Generator inverter: 22 Motor I2T",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 22 Motor I2T"
   ],
   "repaired": false
  },
  "发电机逆变器： 23 RS232丢失": {
   "en": "Generator inverter: 23 RS232 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 23 RS232 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 24 RS485丢失": {
   "en": "Generator inverter: 24 RS485 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 24 RS485 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 25内部参考失败": {
   "en": "Generator inverter: 25 internal ref. fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 25 int. ref. fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 26温度低": {
   "en": "Generator inverter: 26 temp low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 26 temp low"
   ],
   "repaired": false
  },
  "发电机逆变器： 27按键丢失": {
   "en": "Generator inverter: 27 Keypad loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 27 Keypad loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 28电流不平衡": {
   "en": "Generator inverter: 28 current imbalance",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 28 Curr imbalance"
   ],
   "repaired": false
  },
  "INU错误： LSU EXT DI5 （ 1081 ）": {
   "en": "INU ERR: LSU EXT DI5 (1081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 29预充电失败": {
   "en": "Generator inverter: 29 Precharge fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 29 Precharge fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 30驱动器ID失败": {
   "en": "Generator inverter: 30 drive ID fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 30 drive ID fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 31 D1U 电流高": {
   "en": "Generator inverter: 31 D1U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 31 D1U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 32 D1U温度高": {
   "en": "Generator inverter: 32 D1U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 32 D1U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 33 D1V 电流高": {
   "en": "Generator inverter: 33 D1V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 33 D1V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 34 D1V温度高": {
   "en": "Generator inverter: 34 D1V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 34 D1V temp. high"
   ],
   "repaired": false
  },
  "INU错误： LSU EXT DI1 （ 1082 ）": {
   "en": "INU ERR: LSU EXT DI1 (1082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 35 D1W电流高": {
   "en": "Generator inverter: 35 D1W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 35 D1W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 36 D1W温度高": {
   "en": "Generator inverter: 36 D1W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 36 D1W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 37 D1外部跳闸": {
   "en": "Generator inverter: 37 D1 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 37 D1 ext trip"
   ],
   "repaired": false
  },
  "INU错误： INV CUR LIM （ 2212 ）": {
   "en": "INU ERR: INV CUR LIM (2212)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： MOT CUR LIM （ 2300）": {
   "en": "INU ERR: MOT CUR LIM (2300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 38 D1伏特值高": {
   "en": "Generator inverter: 38 D1 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 38 D1 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 39 D1增强DIB": {
   "en": "Generator inverter: 39 D1 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 39 D1 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 40 D2U 电流高": {
   "en": "Generator inverter: 40 D2U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 40 D2U curr. high"
   ],
   "repaired": false
  },
  "INU错误：LSU地F（ 2383）": {
   "en": "INU ERR: LSU EARTH F (2383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 41 D2U温度高": {
   "en": "Generator inverter: 41 D2U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 41 D2U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 42 D2V 电流高": {
   "en": "Generator inverter: 42 D2V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 42 D2V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 43 D2V温度高": {
   "en": "Generator inverter: 43 D2V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 43 D2V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 44 D2W 电流高": {
   "en": "Generator inverter: 44 D2W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 44 D2W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 45 D2W温度高": {
   "en": "Generator inverter: 45 D2W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 45 D2W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 46 D2外部跳闸": {
   "en": "Generator inverter: 46 D2 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 46 D2 ext trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 47 D2伏特值高": {
   "en": "Generator inverter: 47 D2 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 47 D2 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 48 D2增强DIB": {
   "en": "Generator inverter: 48 D2 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 48 D2 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 49 D3U 电流高": {
   "en": "Generator inverter: 49 D3U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 49 D3U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 50 D3U温度高": {
   "en": "Generator inverter: 50 D3U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 50 D3U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 51 D3V 电流高": {
   "en": "Generator inverter: 51 D3V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 51 D3V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 52 D3V温度高": {
   "en": "Generator inverter: 52 D3V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 52 D3V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 53 D3W 电流高": {
   "en": "Generator inverter: 53 D3W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 53 D3W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 54 D3W温度高": {
   "en": "Generator inverter: 54 D3W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 54 D3W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 56 D3伏特值高": {
   "en": "Generator inverter: 56 D3 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 56 D3 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 57超速": {
   "en": "Generator inverter: 57 overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 57 overspeed"
   ],
   "repaired": false
  },
  "发电机逆变器： 58 电流 CTRL 失败": {
   "en": "Generator inverter: 58 currentent ctrl. fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 58 curr. ctrl. fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 59校准运行失败": {
   "en": "Generator inverter: 59 calibration. run fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 59 Calib. run fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 60不合适马达": {
   "en": "Generator inverter: 60 Unsuit. motor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 60 Unsuit. motor"
   ],
   "repaired": false
  },
  "INU错误： ID MAGN REQ （ FF30 ）": {
   "en": "INU ERR: ID MAGN REQ (FF30)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID MAGN （ FF31 ）": {
   "en": "INU ERR: ID MAGN (FF31)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID DONE （ FF32 ）": {
   "en": "INU ERR: ID DONE (FF32)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID 运行 SEL （ FF33 ）": {
   "en": "INU ERR: ID RUN SEL (FF33)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：马达Delta启动（ FF34 ）": {
   "en": "INU ERR: MOTOR STARTS (FF34)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 61编码器丢失": {
   "en": "Generator inverter: 61 Encoder loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 61 Encoder loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 62用户跳闸1": {
   "en": "Generator inverter: 62 user trip 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 62 user trip 1"
   ],
   "repaired": false
  },
  "发电机逆变器： 63现场总线亏损": {
   "en": "Generator inverter: 63 Fieldbus loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 63 Fieldbus loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 64负载高失败": {
   "en": "Generator inverter: 64 load fail high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 64 load fail high"
   ],
   "repaired": false
  },
  "INU错误：-> 断电（ FF39 ）": {
   "en": "INU ERR:--> POWEROFF (FF39)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: --> POWEROFF (FF39)"
   ],
   "repaired": false
  },
  "发电机逆变器： 65负载故障低": {
   "en": "Generator inverter: 65 Load fail low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 65 Load fail low"
   ],
   "repaired": false
  },
  "发电机逆变器： 66电机PTC跳闸": {
   "en": "Generator inverter: 66 Motor PTC trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 66 Motor PTC trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 67DB电阻跳闸": {
   "en": "Generator inverter: 67 DB res. trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 67 DB res. trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 68 未知驱动器的大小": {
   "en": "Generator inverter: 68 Unkn. drive size",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 68 Unkn. drive size"
   ],
   "repaired": false
  },
  "发电机逆变器： 71速度反馈损失": {
   "en": "Generator inverter: 71 Speed feedback. loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 71 Speed feedb. loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 72频高": {
   "en": "Generator inverter: 72 frequence high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 72 Freq. high"
   ],
   "repaired": false
  },
  "INU错误：扼流环 温度 （ FF81 ）": {
   "en": "INU ERR: IN CHOKE TEMP (FF81)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 73用户跳闸2": {
   "en": "Generator inverter: 73 user trip 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 73 user trip 2"
   ],
   "repaired": false
  },
  "发电机逆变器： 74 D3增强DIB": {
   "en": "Generator inverter: 74 D3 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 74 D3 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 75 D4U 电流高": {
   "en": "Generator inverter: 75 D4U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 75 D4U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 76 D4U温度高": {
   "en": "Generator inverter: 76 D4U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 76 D4U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 77 D4V 电流高": {
   "en": "Generator inverter: 77 D4V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 77 D4V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 78 D4V温度高": {
   "en": "Generator inverter: 78 D4V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 78 D4V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 79 D4W 电流高": {
   "en": "Generator inverter: 79 D4W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 79 D4W curr. high"
   ],
   "repaired": false
  },
  "INU错误： POW失败 滤波器E（ FFA0 ）": {
   "en": "INU ERR: POWFAIL FILE (FFA0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 80 D4W温度高": {
   "en": "Generator inverter: 80 D4W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 80 D4W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 82 D4伏特值高": {
   "en": "Generator inverter: 82 D4 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 82 D4 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 83 D4增强的DIB": {
   "en": "Generator inverter: 83 D4 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 83 D4 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 84 D5U 电流高": {
   "en": "Generator inverter: 84 D5U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 84 D5U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 85 D5U温度高": {
   "en": "Generator inverter: 85 D5U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 85 D5U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 86 D5V 电流高": {
   "en": "Generator inverter: 86 D5V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 86 D5V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 87 D5V温度高": {
   "en": "Generator inverter: 87 D5V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 87 D5V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 88 D5W 电流高": {
   "en": "Generator inverter: 88 D5W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 88 D5W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 89 D5W温度高": {
   "en": "Generator inverter: 89 D5W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 89 D5W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 91 D5伏特值高": {
   "en": "Generator inverter: 91 D5 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 91 D5 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 92 D5增强DIB": {
   "en": "Generator inverter: 92 D5 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 92 D5 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 94 SFE 同步电源损耗": {
   "en": "Generator inverter: 94 SFE synchronzation mains loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 94 SFE Sync mains loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 95 SFE伏主损失": {
   "en": "Generator inverter: 95 SFE V mains loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 95 SFE V mains loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 96 SFE辅助相.det.损失": {
   "en": "Generator inverter: 96 SFE aux ph.det.loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 96 SFE aux ph.det.loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 98 SFE扼流器PTC跳闸": {
   "en": "Generator inverter: 98 SFE choke PTC trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 98 SFE choke PTC trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 99未知跳闸": {
   "en": "Generator inverter: 99 Unknown trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 99 Unknown trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 100多余的输出电流": {
   "en": "Generator inverter: 100 Excess output cur.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 100 Excess output cur."
   ],
   "repaired": false
  },
  "发电机逆变器： 101电机温度": {
   "en": "Generator inverter: 101 Motor thermostat",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 101 Motor thermostat"
   ],
   "repaired": false
  },
  "发电机逆变器： 102电动机I2t": {
   "en": "Generator inverter: 102 Motor I2T",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 102 Motor I2T"
   ],
   "repaired": false
  },
  "发电机逆变器： 103电机PTC": {
   "en": "Generator inverter: 103 Motor PTC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 103 Motor PTC"
   ],
   "repaired": false
  },
  "发电机逆变器： 104制动电阻": {
   "en": "Generator inverter: 104 DB resistor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 104 DB resistor"
   ],
   "repaired": false
  },
  "发电机逆变器： 105参考亏损": {
   "en": "Generator inverter: 105 Reference loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 105 Reference loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 106 FBC 1负": {
   "en": "Generator inverter: 106 FBC 1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 106 FBC 1 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 107温度高": {
   "en": "Generator inverter: 107 Temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 107 Temp high"
   ],
   "repaired": false
  },
  "发电机逆变器： 108温度低": {
   "en": "Generator inverter: 108 Temp low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 108 Temp low"
   ],
   "repaired": false
  },
  "发电机逆变器： 109 FBC损失2": {
   "en": "Generator inverter: 109 FBC 2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 109 FBC 2 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 110备用参考损失": {
   "en": "Generator inverter: 110 Backup ref. loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 110 Backup ref. loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 111 CAN总线2警告": {
   "en": "Generator inverter: 111 CAN2 warnings",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 111 CAN2 warnings"
   ],
   "repaired": false
  },
  "发电机逆变器： 112 RS232亏损": {
   "en": "Generator inverter: 112 RS232 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 112 RS232 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 113 RS485亏损": {
   "en": "Generator inverter: 113 RS485 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 113 RS485 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 114超速": {
   "en": "Generator inverter: 114 Over speed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 114 Over speed"
   ],
   "repaired": false
  },
  "发电机逆变器： 115编码器丢失": {
   "en": "Generator inverter: 115 Encoder loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 115 Encoder loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 116现场总线亏损": {
   "en": "Generator inverter: 116 Fieldbus loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 116 Fieldbus loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 117 CAN总线2警告": {
   "en": "Generator inverter: 117 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 117 CAN2 warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 118 CAN总线2警告": {
   "en": "Generator inverter: 118 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 118 CAN2 warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 119 CAN总线2警告": {
   "en": "Generator inverter: 119 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 119 CAN2 warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 120内部软件故障": {
   "en": "Generator inverter: 120 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 120 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 121内部软件故障": {
   "en": "Generator inverter: 121 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 121 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 122内部软件故障": {
   "en": "Generator inverter: 122 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 122 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 123内部软件故障": {
   "en": "Generator inverter: 123 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 123 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 124内部软件故障": {
   "en": "Generator inverter: 124 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 124 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 125内部软件故障": {
   "en": "Generator inverter: 125 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 125 Internal SW fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 126 FBC 3亏损": {
   "en": "Generator inverter: 126 FBC 3 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 126 FBC 3 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 127备用相提并论在使用": {
   "en": "Generator inverter: 127 Backup par. in use",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 127 Backup par. in use"
   ],
   "repaired": false
  },
  "发电机逆变器： 128负载故障高": {
   "en": "Generator inverter: 128 Load fault high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 128 Load fault high"
   ],
   "repaired": false
  },
  "发电机逆变器： 129负载故障低": {
   "en": "Generator inverter: 129 Load fault low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 129 Load fault low"
   ],
   "repaired": false
  },
  "发电机逆变器： 130可警告": {
   "en": "Generator inverter: 130 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 130 CAN warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 131 CAN总线警告": {
   "en": "Generator inverter: 131 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 131 CAN warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 132可警告": {
   "en": "Generator inverter: 132 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 132 CAN warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 133 SFE电源频": {
   "en": "Generator inverter: 133 SFE mains frequence",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 133 SFE mains freq."
   ],
   "repaired": false
  },
  "发电机逆变器： 134 SFE同步亏损": {
   "en": "Generator inverter: 134 SFE synchronzationh loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 134 SFE synch loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 135可警告": {
   "en": "Generator inverter: 135 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 135 CAN warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 136 SFE LCN 反馈": {
   "en": "Generator inverter: 136 SFE LCN feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 136 SFE LCN feedback"
   ],
   "repaired": false
  },
  "发电机逆变器： 137 SFE扼流PTC": {
   "en": "Generator inverter: 137 SFE Choke PTC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 137 SFE Choke PTC"
   ],
   "repaired": false
  },
  "发电机逆变器： 138 DB处于非活动状态": {
   "en": "Generator inverter: 138 DB inactive",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 138 DB inactive"
   ],
   "repaired": false
  },
  "发电机逆变器： 139 U相共享": {
   "en": "Generator inverter: 139 U-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 139 U-phase sharing"
   ],
   "repaired": false
  },
  "发电机逆变器： 140 V相共享": {
   "en": "Generator inverter: 140 V-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 140 V-phase sharing"
   ],
   "repaired": false
  },
  "发电机逆变器： 141 W相共享": {
   "en": "Generator inverter: 141 W-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 141 W-phase sharing"
   ],
   "repaired": false
  },
  "发电机逆变器： 142电源放大器警告": {
   "en": "Generator inverter: 142 Mains amp. warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 142 Mains amp. warning"
   ],
   "repaired": false
  },
  "发电机逆变器： 143第1章以太网亏损": {
   "en": "Generator inverter: 143 Ethernet ch.1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 143 Ethernet ch.1 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 144以太网CH.2亏损": {
   "en": "Generator inverter: 144 Ethernet ch.2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 144 Ethernet ch.2 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 145保留": {
   "en": "Generator inverter: 145 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 145 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 146保留": {
   "en": "Generator inverter: 146 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 146 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 147在程序中下载": {
   "en": "Generator inverter: 147 Download in progr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 147 Download in progr."
   ],
   "repaired": false
  },
  "发电机逆变器： 148保留": {
   "en": "Generator inverter: 148 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 148 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 149保留": {
   "en": "Generator inverter: 149 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 149 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 150 PWM误差": {
   "en": "Generator inverter: 150 PWM error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 150 PWM error"
   ],
   "repaired": false
  },
  "发电机逆变器： 151 DB跳闸": {
   "en": "Generator inverter: 151 DB trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 151 DB trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 152 DB硬件温度高": {
   "en": "Generator inverter: 152 DB HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 152 DB HW temp high"
   ],
   "repaired": false
  },
  "发电机逆变器： 153 D6U 电流高": {
   "en": "Generator inverter: 153 D6U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 153 D6U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 154 D6U温度高": {
   "en": "Generator inverter: 154 D6U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 154 D6U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 155 D6V 电流高": {
   "en": "Generator inverter: 155 D6V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 155 D6V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 156 D6V温度高": {
   "en": "Generator inverter: 156 D6V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 156 D6V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 157 D6W 电流高": {
   "en": "Generator inverter: 157 D6W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 157 D6W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 158 D6W温度高": {
   "en": "Generator inverter: 158 D6W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 158 D6W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 159 D6分机跳闸": {
   "en": "Generator inverter: 159 D6 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 159 D6 ext trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 160 D6伏特值高": {
   "en": "Generator inverter: 160 D6 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 160 D6 volt high"
   ],
   "repaired": false
  },
  "发电机逆变器： 161 D6增强DIB": {
   "en": "Generator inverter: 161 D6 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 161 D6 enhanced DIB"
   ],
   "repaired": false
  },
  "发电机逆变器： 162 DB1U 电流高": {
   "en": "Generator inverter: 162 DB1U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 162 DB1U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 163 DB1U温度高": {
   "en": "Generator inverter: 163 DB1U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 163 DB1U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 164 DB1V 电流高": {
   "en": "Generator inverter: 164 DB1V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 164 DB1V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 165 DB1V温度高": {
   "en": "Generator inverter: 165 DB1V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 165 DB1V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 166 DB1W 电流高": {
   "en": "Generator inverter: 166 DB1W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 166 DB1W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 167 DB1W温度高": {
   "en": "Generator inverter: 167 DB1W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 167 DB1W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 168 DB1外部跳闸": {
   "en": "Generator inverter: 168 DB1 external trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 168 DB1 Ext. trip"
   ],
   "repaired": false
  },
  "INU警告： I / O的SP号（ 7281 ）": {
   "en": "INU WARN: I/O SP REF (7281)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： KLIXON （ 4311 ）": {
   "en": "INU WARN: KLIXON (4311)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 169 DB1电压高": {
   "en": "Generator inverter: 169 DB1 voltage high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 169 DB1 voltage high"
   ],
   "repaired": false
  },
  "发电机逆变器： 170 DB1 电流高": {
   "en": "Generator inverter: 170 DB1 currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 170 DB1 curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 171 DB2U 电流高": {
   "en": "Generator inverter: 171 DB2U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 171 DB2U curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 172 DB2U温度高": {
   "en": "Generator inverter: 172 DB2U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 172 DB2U temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 173 DB2V 电流高": {
   "en": "Generator inverter: 173 DB2V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 173 DB2V curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 174 DB2V温度高": {
   "en": "Generator inverter: 174 DB2V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 174 DB2V temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 175 DB2W 电流高": {
   "en": "Generator inverter: 175 DB2W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 175 DB2W curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 176 DB2W温度高": {
   "en": "Generator inverter: 176 DB2W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 176 DB2W temp. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 177 DB2外部跳闸": {
   "en": "Generator inverter: 177 DB2 external trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 177 DB2 Ext. trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 178 DB2电压高": {
   "en": "Generator inverter: 178 DB2 voltage high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 178 DB2 voltage high"
   ],
   "repaired": false
  },
  "发电机逆变器： 179 DB2 电流高": {
   "en": "Generator inverter: 179 DB2 currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 179 DB2 curr. high"
   ],
   "repaired": false
  },
  "发电机逆变器： 180 PIB的FPGA配置失败": {
   "en": "Generator inverter: 180 PIB FPGA conf.fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 180 PIB FPGA conf.fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 181 SMPS未识别": {
   "en": "Generator inverter: 181 unidentified SMPS",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 181 Unident. SMPS"
   ],
   "repaired": false
  },
  "发电机逆变器： 182 D1未识别": {
   "en": "Generator inverter: 182 unidentified D1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 182 Unident. D1"
   ],
   "repaired": false
  },
  "发电机逆变器： 183 SMPS1未识别": {
   "en": "Generator inverter: 183 unidentified SMPS1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 183 Unident. SMPS1"
   ],
   "repaired": false
  },
  "发电机逆变器： 184 D1不正确": {
   "en": "Generator inverter: 184 Incorrect D1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 184 Incorr. D1"
   ],
   "repaired": false
  },
  "发电机逆变器： 185 D2未识别": {
   "en": "Generator inverter: 185 unidentified D2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 185 Unident. D2"
   ],
   "repaired": false
  },
  "发电机逆变器： 186 SMPS2未识别": {
   "en": "Generator inverter: 186 unidentified SMPS2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 186 Unident. SMPS2"
   ],
   "repaired": false
  },
  "发电机逆变器： 187 D2不正确": {
   "en": "Generator inverter: 187 Incorrect D2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 187 Incorr. D2"
   ],
   "repaired": false
  },
  "INU警告： INV CUR LIM （ 2212 ）": {
   "en": "INU WARN: INV CUR LIM (2212)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： MOT CUR LIM （ 2300）": {
   "en": "INU WARN: MOT CUR LIM (2300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 188 D3未识别": {
   "en": "Generator inverter: 188 unidentified D3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 188 Unident. D3"
   ],
   "repaired": false
  },
  "发电机逆变器： 189SMPS3未识别": {
   "en": "Generator inverter: 189 unidentified SMPS3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 189 Unident. SMPS3"
   ],
   "repaired": false
  },
  "发电机逆变器： 190 D3不正确": {
   "en": "Generator inverter: 190 Incorrect D3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 190 Incorr. D3"
   ],
   "repaired": false
  },
  "发电机逆变器： 191 D4未识别": {
   "en": "Generator inverter: 191 unidentified D4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 191 Unident. D4"
   ],
   "repaired": false
  },
  "发电机逆变器： 192SMPS4未识别": {
   "en": "Generator inverter: 192 unidentified SMPS4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 192 Unident. SMPS4"
   ],
   "repaired": false
  },
  "发电机逆变器： 193 D4不正确": {
   "en": "Generator inverter: 193 Incorrect D4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 193 Incorr. D4"
   ],
   "repaired": false
  },
  "发电机逆变器： 194 D5未识别": {
   "en": "Generator inverter: 194 unidentified D5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 194 Unident. D5"
   ],
   "repaired": false
  },
  "发电机逆变器： 195SMPS5未识别": {
   "en": "Generator inverter: 195 unidentified SMPS5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 195 Unident. SMPS5"
   ],
   "repaired": false
  },
  "INU警告： ID MAGN REQ （ FF30 ）": {
   "en": "INU WARN: ID MAGN REQ (FF30)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： ID MAGN （ FF31 ）": {
   "en": "INU WARN: ID MAGN (FF31)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： ID DONE （ FF32 ）": {
   "en": "INU WARN: ID DONE (FF32)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： ID 运行 SEL （ FF33 ）": {
   "en": "INU WARN: ID RUN SEL (FF33)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 196 D5不正确": {
   "en": "Generator inverter: 196 Incorrect D5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 196 Incorr. D5"
   ],
   "repaired": false
  },
  "发电机逆变器： 197 D6未识别": {
   "en": "Generator inverter: 197 unidentified D6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 197 Unident. D6"
   ],
   "repaired": false
  },
  "INU警告： 校准RA REQ （ FF36 ）": {
   "en": "INU WARN: calibrationRA REQ (FF36)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: CALIBRA REQ (FF36)"
   ],
   "repaired": false
  },
  "INU警告： 校准RA DONE （ FF37 ）": {
   "en": "INU WARN: calibrationRA DONE (FF37)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: CALIBRA DONE (FF37)"
   ],
   "repaired": false
  },
  "发电机逆变器： 198SMPS6未识别": {
   "en": "Generator inverter: 198 unidentified SMPS6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 198 Unident. SMPS6"
   ],
   "repaired": false
  },
  "发电机逆变器： 199错误D6": {
   "en": "Generator inverter: 199 Incorrect D6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 199 Incorr. D6"
   ],
   "repaired": false
  },
  "发电机逆变器： 200 CAN总线1亏损": {
   "en": "Generator inverter: 200 CAN1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 200 CAN1 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 201不合适数据库负载": {
   "en": "Generator inverter: 201 Unsuit. DB load",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 201 Unsuit. DB load"
   ],
   "repaired": false
  },
  "发电机逆变器： 203 CAN总线2亏损": {
   "en": "Generator inverter: 203 CAN2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 203 CAN2 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 205客户自定义": {
   "en": "Generator inverter: 205 Customer special",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 205 Customer special"
   ],
   "repaired": false
  },
  "INU警告： MOT TORQ LIM （ FF85 ）": {
   "en": "INU WARN: MOT TORQ LIM (FF85)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： MOT POW LIM （ FF86 ）": {
   "en": "INU WARN: MOT POW LIM (FF86)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 206客户自定义": {
   "en": "Generator inverter: 206 Customer special",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 206 Customer special"
   ],
   "repaired": false
  },
  "发电机逆变器： 207 U-相值共享失败": {
   "en": "Generator inverter: 207 U-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 207 U-ph sharing fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 208 V-相共享失败": {
   "en": "Generator inverter: 208 V-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 208 V-ph sharing fail"
   ],
   "repaired": false
  },
  "INU警告：APPRG 错误 （ FFD6 ）": {
   "en": "INU WARN: AP PRG ERR (FFD6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 209 W-相值共享失败": {
   "en": "Generator inverter: 209 W-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 209 W-ph sharing fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 210电源幅度": {
   "en": "Generator inverter: 210 Mains amplitude",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 210 Mains amplitude"
   ],
   "repaired": false
  },
  "发电机逆变器： 211不是40 MHzC直流": {
   "en": "Generator inverter: 211 Not 40 Mhz CDC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 211 Not 40 Mhz CDC"
   ],
   "repaired": false
  },
  "发电机逆变器： 212未找出原因， DELTA1": {
   "en": "Generator inverter: 212 Undiagnosed,DELTA1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 212 Undiagnosed,DELTA1"
   ],
   "repaired": false
  },
  "INU警告： KLIXON （ 43A7 ）": {
   "en": "INU WARN: KLIXON (43A7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: KLIXON        (43A7)",
    "INU WARN: KLIXON(43A7)"
   ],
   "repaired": false
  },
  "发电机逆变器： 213未找出原因， DELTA2": {
   "en": "Generator inverter: 213 Undiagnosed,DELTA2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 213 Undiagnosed,DELTA2"
   ],
   "repaired": false
  },
  "发电机逆变器： 214未找出原因， DELTA3": {
   "en": "Generator inverter: 214 Undiagnosed,DELTA3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 214 Undiagnosed,DELTA3"
   ],
   "repaired": false
  },
  "发电机逆变器： 215未找出原因， DELTA4": {
   "en": "Generator inverter: 215 Undiagnosed,DELTA4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 215 Undiagnosed,DELTA4"
   ],
   "repaired": false
  },
  "发电机逆变器： 216未找出原因， DELTA5": {
   "en": "Generator inverter: 216 Undiagnosed,DELTA5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 216 Undiagnosed,DELTA5"
   ],
   "repaired": false
  },
  "发电机逆变器： 217未找出原因， DELTA6": {
   "en": "Generator inverter: 217 Undiagnosed,DELTA6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 217 Undiagnosed,DELTA6"
   ],
   "repaired": false
  },
  "发电机逆变器： 218未找出原因， DB1": {
   "en": "Generator inverter: 218 Undiagnosed, DB1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 218 Undiagnosed, DB1"
   ],
   "repaired": false
  },
  "发电机逆变器： 219未找出原因， DB2": {
   "en": "Generator inverter: 219 Undiagnosed, DB2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 219 Undiagnosed, DB2"
   ],
   "repaired": false
  },
  "INU警告：IN 扼流环 温度 （ FF94 ）": {
   "en": "INU WARN: IN CHOKE TEMP (FF94)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 220以太网1丢失": {
   "en": "Generator inverter: 220 Ethernet 1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 220 Ethernet 1 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 220以太网2丢失": {
   "en": "Generator inverter: 221 Ethernet 2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 221 Ethernet 2 loss"
   ],
   "repaired": false
  },
  "发电机逆变器： 222扭力证明失败": {
   "en": "Generator inverter: 222 Torque prove fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 222 Torque prove fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 223制动释放失败": {
   "en": "Generator inverter: 223 Brake release fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 223 Brake release fail"
   ],
   "repaired": false
  },
  "发电机逆变器： 224下载进行中": {
   "en": "Generator inverter: 224 Download in progr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 224 Download in progr."
   ],
   "repaired": false
  },
  "发电机逆变器： 225保留": {
   "en": "Generator inverter: 225 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 225 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 226保留": {
   "en": "Generator inverter: 226 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 226 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 227保留": {
   "en": "Generator inverter: 227 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 227 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 228保留": {
   "en": "Generator inverter: 228 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 228 Reserved"
   ],
   "repaired": false
  },
  "发电机逆变器： 229 DSP通讯故障": {
   "en": "Generator inverter: 229 DSP comms failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 229 DSP comms failure"
   ],
   "repaired": false
  },
  "发电机逆变器： 230用户提示1": {
   "en": "Generator inverter: 230 User alert 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 230 Cap. Fan Fault"
   ],
   "repaired": false
  },
  "发电机逆变器： 231用户警报2": {
   "en": "Generator inverter: 231 User alert 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 231 DC Bus Low"
   ],
   "repaired": false
  },
  "发电机逆变器： 232用户警报3": {
   "en": "Generator inverter: 232 User alert 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 232 User alert 3"
   ],
   "repaired": false
  },
  "发电机逆变器： 233用户警惕4": {
   "en": "Generator inverter: 233 User alert 4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 233 User alert 4"
   ],
   "repaired": false
  },
  "发电机逆变器： 234用户警惕5": {
   "en": "Generator inverter: 234 User alert 5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 234 User alert 5"
   ],
   "repaired": false
  },
  "发电机逆变器： 235用户警惕6": {
   "en": "Generator inverter: 235 User alert 6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 235 User alert 6"
   ],
   "repaired": false
  },
  "发电机逆变器： 236用户警惕7": {
   "en": "Generator inverter: 236 User alert 7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 236 User alert 7"
   ],
   "repaired": false
  },
  "发电机逆变器： 237用户警惕8": {
   "en": "Generator inverter: 237 User alert 8",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 237 User alert 8"
   ],
   "repaired": false
  },
  "发电机逆变器： 238用户警惕9": {
   "en": "Generator inverter: 238 User alert 9",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 238 User alert 9"
   ],
   "repaired": false
  },
  "发电机逆变器： 239用户警惕10": {
   "en": "Generator inverter: 239 User alert 10",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 239 User alert 10"
   ],
   "repaired": false
  },
  "发电机逆变器： 240Delta1 DIB 5V": {
   "en": "Generator inverter: 240 Delta 1 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 240 Delta 1 DIB 5v"
   ],
   "repaired": false
  },
  "发电机逆变器： 241Delta1 DIB +15 V": {
   "en": "Generator inverter: 241 Delta 1 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 241 Delta 1 DIB +15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 242Delta1 DIB-15V": {
   "en": "Generator inverter: 242 Delta 1 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 242 Delta 1 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 243Delta1 DIB风扇": {
   "en": "Generator inverter: 243 Delta 1 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 243 Delta 1 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 244Delta1 DIB > fU": {
   "en": "Generator inverter: 244 Delta 1 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 244 Delta 1 DIB >f U"
   ],
   "repaired": false
  },
  "发电机逆变器： 245Delta1 DIB > F V": {
   "en": "Generator inverter: 245 Delta 1 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 245 Delta 1 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 246Delta1 DIB >f W": {
   "en": "Generator inverter: 246 Delta 1 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 246 Delta 1 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 247Delta1 DIB TDU": {
   "en": "Generator inverter: 247 Delta 1 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 247 Delta 1 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 248Delta1 DIB TD V": {
   "en": "Generator inverter: 248 Delta 1 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 248 Delta 1 DIB Td V"
   ],
   "repaired": false
  },
  "发电机逆变器： 249Delta1 DIB TD W": {
   "en": "Generator inverter: 249 Delta 1 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 249 Delta 1 DIB Td W"
   ],
   "repaired": false
  },
  "发电机逆变器： 250Delta2 DIB 5V": {
   "en": "Generator inverter: 250 Delta 2 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 250 Delta 2 DIB 5v"
   ],
   "repaired": false
  },
  "发电机逆变器： 251Delta2 DIB +15 V": {
   "en": "Generator inverter: 251 Delta 2 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 251 Delta 2 DIB +15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 252Delta2 DIB-15V": {
   "en": "Generator inverter: 252 Delta 2 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 252 Delta 2 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 253Delta2 DIB风扇": {
   "en": "Generator inverter: 253 Delta 2 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 253 Delta 2 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 254Delta2 DIB > fU": {
   "en": "Generator inverter: 254 Delta 2 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 254 Delta 2 DIB >f U"
   ],
   "repaired": false
  },
  "发电机逆变器： 255Delta2 DIB > F V": {
   "en": "Generator inverter: 255 Delta 2 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 255 Delta 2 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 256Delta2 DIB >f W": {
   "en": "Generator inverter: 256 Delta 2 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 256 Delta 2 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 257Delta2 DIB TDU": {
   "en": "Generator inverter: 257 Delta 2 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 257 Delta 2 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 258Delta2 DIB TD V": {
   "en": "Generator inverter: 258 Delta 2 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 258 Delta 2 DIB Td V"
   ],
   "repaired": false
  },
  "INU错误：AINT？ 配置 （ 548C ）": {
   "en": "INU ERR: AINT? CONFIG (548C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：同步RO FLT （ 8180 ）": {
   "en": "INU ERR: synchronzationHRO FLT (8180)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: SYNCHRO FLT (8180)"
   ],
   "repaired": false
  },
  "发电机逆变器： 259Delta2 DIB TD W": {
   "en": "Generator inverter: 259 Delta 2 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 259 Delta 2 DIB Td W"
   ],
   "repaired": false
  },
  "INU错误： EXT 事件 DI4 （ 9084 ）": {
   "en": "INU ERR: EXT EVNT DI4 (9084)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 事件 DI5 （ 9085 ）": {
   "en": "INU ERR: EXT EVNT DI5 (9085)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 事件 DI7 （ 9087 ）": {
   "en": "INU ERR: EXT EVNT DI7 (9087)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 260Delta3 DIB 5V": {
   "en": "Generator inverter: 260 Delta 3 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 260 Delta 3 DIB 5v"
   ],
   "repaired": false
  },
  "INU警告： EXT 事件 DI4 （ 908B ）": {
   "en": "INU WARN: EXT EVNT DI4 (908B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：一次侧CNT FLT （ FF17 ）": {
   "en": "INU ERR: MAIN CNT FLT (FF17)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 261Delta3 DIB +15 V": {
   "en": "Generator inverter: 261 Delta 3 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 261 Delta 3 DIB +15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 262Delta3 DIB-15V": {
   "en": "Generator inverter: 262 Delta 3 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 262 Delta 3 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 263Delta3 DIB风扇": {
   "en": "Generator inverter: 263 Delta 3 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 263 Delta 3 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 264Delta3 DIB > fU": {
   "en": "Generator inverter: 264 Delta 3 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 264 Delta 3 DIB >f U"
   ],
   "repaired": false
  },
  "INU错误：状态溢出 （ FF5C ）": {
   "en": "INU ERR: STATE OVERF (FF5C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： APPL.WaterEND （ FF5D ）": {
   "en": "INU ERR: APPL.WaterEND (FF5D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: APPL.W.END (FF5D)"
   ],
   "repaired": false
  },
  "发电机逆变器： 265Delta3 DIB > F V": {
   "en": "Generator inverter: 265 Delta 3 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 265 Delta 3 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 266Delta3 DIB >f W": {
   "en": "Generator inverter: 266 Delta 3 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 266 Delta 3 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 267Delta3 DIB TDU": {
   "en": "Generator inverter: 267 Delta 3 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 267 Delta 3 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 268Delta3 DIB TD V": {
   "en": "Generator inverter: 268 Delta 3 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 268 Delta 3 DIB Td V"
   ],
   "repaired": false
  },
  "发电机逆变器： 269Delta3 DIB TD W": {
   "en": "Generator inverter: 269 Delta 3 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 269 Delta 3 DIB Td W"
   ],
   "repaired": false
  },
  "发电机逆变器： 270Delta4 DIB 5V": {
   "en": "Generator inverter: 270 Delta 4 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 270 Delta 4 DIB 5v"
   ],
   "repaired": false
  },
  "发电机逆变器： 271Delta4 DIB +15 V": {
   "en": "Generator inverter: 271 Delta 4 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 271 Delta 4 DIB +15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 272Delta4 DIB-15V": {
   "en": "Generator inverter: 272 Delta 4 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 272 Delta 4 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 273Delta4 DIB风扇": {
   "en": "Generator inverter: 273 Delta 4 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 273 Delta 4 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 274Delta4 DIB > fU": {
   "en": "Generator inverter: 274 Delta 4 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 274 Delta 4 DIB >f U"
   ],
   "repaired": false
  },
  "发电机逆变器： 275Delta4 DIB > F V": {
   "en": "Generator inverter: 275 Delta 4 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 275 Delta 4 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 276Delta4 DIB >f W": {
   "en": "Generator inverter: 276 Delta 4 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 276 Delta 4 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 277Delta4 DIB TDU": {
   "en": "Generator inverter: 277 Delta 4 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 277 Delta 4 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 278Delta4 DIB TD V": {
   "en": "Generator inverter: 278 Delta 4 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 278 Delta 4 DIB Td V"
   ],
   "repaired": false
  },
  "发电机逆变器： 279Delta4 DIB TD W": {
   "en": "Generator inverter: 279 Delta 4 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 279 Delta 4 DIB Td W"
   ],
   "repaired": false
  },
  "INU警告： CUR UNBAL （ 2387 ）": {
   "en": "INU WARN: CUR UNBAL     (2387)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: CUR UNBAL(2387)"
   ],
   "repaired": false
  },
  "发电机逆变器： 280Delta5 DIB 5V": {
   "en": "Generator inverter: 280 Delta 5 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 280 Delta 5 DIB 5v"
   ],
   "repaired": false
  },
  "发电机逆变器： 281Delta5 DIB +15 V": {
   "en": "Generator inverter: 281 Delta 5 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 281 Delta 5 DIB +15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 282Delta5 DIB-15V": {
   "en": "Generator inverter: 282 Delta 5 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 282 Delta 5 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 283Delta5 DIB风扇": {
   "en": "Generator inverter: 283 Delta 5 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 283 Delta 5 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 284Delta5 DIB > fU": {
   "en": "Generator inverter: 284 Delta 5 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 284 Delta 5 DIB >f U"
   ],
   "repaired": false
  },
  "发电机逆变器： 285Delta5 DIB > F V": {
   "en": "Generator inverter: 285 Delta 5 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 285 Delta 5 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 286Delta5 DIB >f W": {
   "en": "Generator inverter: 286 Delta 5 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 286 Delta 5 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 287Delta5 DIB TDU": {
   "en": "Generator inverter: 287 Delta 5 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 287 Delta 5 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 288Delta5 DIB TD V": {
   "en": "Generator inverter: 288 Delta 5 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 288 Delta 5 DIB Td V"
   ],
   "repaired": false
  },
  "发电机逆变器： 289Delta5 DIB TD W": {
   "en": "Generator inverter: 289 Delta 5 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 289 Delta 5 DIB Td W"
   ],
   "repaired": false
  },
  "发电机逆变器： 290Delta6 DIB 5V": {
   "en": "Generator inverter: 290 Delta 6 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 290 Delta 6 DIB 5v"
   ],
   "repaired": false
  },
  "发电机逆变器： 291Delta6 DIB +15 V": {
   "en": "Generator inverter: 291 Delta 6 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 291 Delta 6 DIB +15v"
   ],
   "repaired": false
  },
  "INU警告： AI <MIN FUNC （ 8184 ）": {
   "en": "INU WARN: AI <MIN FUNC  (8184)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 292Delta6 DIB-15V": {
   "en": "Generator inverter: 292 Delta 6 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 292 Delta 6 DIB -15v"
   ],
   "repaired": false
  },
  "发电机逆变器： 293Delta6 DIB风扇": {
   "en": "Generator inverter: 293 Delta 6 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 293 Delta 6 DIB Fan"
   ],
   "repaired": false
  },
  "发电机逆变器： 294Delta6 DIB > fU": {
   "en": "Generator inverter: 294 Delta 6 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 294 Delta 6 DIB >f U"
   ],
   "repaired": false
  },
  "发电机逆变器： 295Delta6 DIB > F V": {
   "en": "Generator inverter: 295 Delta 6 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 295 Delta 6 DIB >f V"
   ],
   "repaired": false
  },
  "发电机逆变器： 296Delta6 DIB >f W": {
   "en": "Generator inverter: 296 Delta 6 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 296 Delta 6 DIB >f W"
   ],
   "repaired": false
  },
  "发电机逆变器： 297Delta6 DIB TDU": {
   "en": "Generator inverter: 297 Delta 6 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 297 Delta 6 DIB Td U"
   ],
   "repaired": false
  },
  "发电机逆变器： 298Delta6 DIB TD V": {
   "en": "Generator inverter: 298 Delta 6 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 298 Delta 6 DIB Td V"
   ],
   "repaired": false
  },
  "发电机逆变器： 299Delta6 DIB TD W": {
   "en": "Generator inverter: 299 Delta 6 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 299 Delta 6 DIB Td W"
   ],
   "repaired": false
  },
  "发电机逆变器： 300 PWM 同步脉冲": {
   "en": "Generator inverter: 300 PWM synchronzation. Pulse",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 300 PWM Sync. Pulse"
   ],
   "repaired": false
  },
  "发电机逆变器： 301未知跳闸": {
   "en": "Generator inverter: 301 Unknown Trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 301 Unknown Trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 303 DSP执行的跳闸": {
   "en": "Generator inverter: 303 DSP Execution Trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 303 DSP Execution Trip"
   ],
   "repaired": false
  },
  "发电机逆变器： 304 D1 U相Gt 错误": {
   "en": "Generator inverter: 304 D1 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 304 D1 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 305 D1 V相Gt 错误": {
   "en": "Generator inverter: 305 D1 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 305 D1 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 306 D1 W相Gt 错误": {
   "en": "Generator inverter: 306 D1 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 306 D1 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 307 D2 U相Gt 错误": {
   "en": "Generator inverter: 307 D2 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 307 D2 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 308 D2 V相Gt 错误": {
   "en": "Generator inverter: 308 D2 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 308 D2 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 309 D2 W相Gt 错误": {
   "en": "Generator inverter: 309 D2 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 309 D2 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 310 D3 U相Gt 错误": {
   "en": "Generator inverter: 310 D3 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 310 D3 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 311 D3 V相Gt 错误": {
   "en": "Generator inverter: 311 D3 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 311 D3 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 312 D3 W相Gt 错误": {
   "en": "Generator inverter: 312 D3 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 312 D3 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "ISU错误： CIR CMEAS (2211)": {
   "en": "ISU ERR: CIR CMEAS (2211)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURR MEAS (2211)"
   ],
   "repaired": false
  },
  "ISU错误： CUR UNBAL （ 2330）": {
   "en": "ISU ERR: CUR UNBAL (2330)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 313 D4 U相Gt 错误": {
   "en": "Generator inverter: 313 D4 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 313 D4 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 314 D4 V相Gt 错误": {
   "en": "Generator inverter: 314 D4 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 314 D4 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 315 D4 W相Gt 错误": {
   "en": "Generator inverter: 315 D4 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 315 D4 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "ISU错误： LSU EXT DI4 （ 1080 ）": {
   "en": "ISU ERR: LSU EXT DI4 (1080)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 316 D5 U相Gt 错误": {
   "en": "Generator inverter: 316 D5 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 316 D5 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 317 D5 V相Gt 错误": {
   "en": "Generator inverter: 317 D5 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 317 D5 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 318 D5 W相Gt 错误": {
   "en": "Generator inverter: 318 D5 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 318 D5 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 319 D6 U相Gt 错误": {
   "en": "Generator inverter: 319 D6 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 319 D6 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 320 D6 V相Gt 错误": {
   "en": "Generator inverter: 320 D6 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 320 D6 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 321 D6 W相Gt 错误": {
   "en": "Generator inverter: 321 D6 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 321 D6 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "发电机逆变器： 322 DSP没有安装": {
   "en": "Generator inverter: 322 DSP not fitted",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GenInv: 322 DSP not fitted"
   ],
   "repaired": false
  },
  "并网逆变器：未定义错误": {
   "en": "Grid Inverter: Error is not defined",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: Error is not defined"
   ],
   "repaired": false
  },
  "并网逆变器： 1互锁": {
   "en": "Grid Inverter: 1 interlock",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 1 interlock"
   ],
   "repaired": false
  },
  "并网逆变器： 2参考亏损": {
   "en": "Grid Inverter: 2 reference loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 2 reference loss"
   ],
   "repaired": false
  },
  "并网逆变器： 3直流过压": {
   "en": "Grid Inverter: 3 DC overvolts",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 3 DC overvolts"
   ],
   "repaired": false
  },
  "并网逆变器： 4直流欠压": {
   "en": "Grid Inverter: 4 DC undervolts",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 4 DC undervolts"
   ],
   "repaired": false
  },
  "并网逆变器： 5定时过电流": {
   "en": "Grid Inverter: 5 Timed overcurrententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 5 Timed overcurrent"
   ],
   "repaired": false
  },
  "并网逆变器： 6过热": {
   "en": "Grid Inverter: 6 overtemperature",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 6 overtemperature"
   ],
   "repaired": false
  },
  "并网逆变器： 7装置 过电流": {
   "en": "Grid Inverter: 7 inst. overcurrententent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 7 inst. overcurrent"
   ],
   "repaired": false
  },
  "并网逆变器： 8 U-相值装置 过电流": {
   "en": "Grid Inverter: 8 U-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 8 U-ph inst. overcurr."
   ],
   "repaired": false
  },
  "并网逆变器： 9 U-相值硬件温度高": {
   "en": "Grid Inverter: 9 U-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 9 U-ph HW temp high"
   ],
   "repaired": false
  },
  "并网逆变器：10V-相装置 过电流": {
   "en": "Grid Inverter: 10 V-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 10 V-ph inst. overcurr"
   ],
   "repaired": false
  },
  "并网逆变器： 11 V-相硬件温度高": {
   "en": "Grid Inverter: 11 V-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 11 V-ph HW temp high"
   ],
   "repaired": false
  },
  "并网逆变器： 12 W-相装置 过电流": {
   "en": "Grid Inverter: 12 W-ph inst. overcurrentent",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 12 W-ph inst. overcurr"
   ],
   "repaired": false
  },
  "并网逆变器： 13 W-相硬件温度高": {
   "en": "Grid Inverter: 13 W-ph HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 13 W-ph HW temp high"
   ],
   "repaired": false
  },
  "并网逆变器： 14enc电源故障": {
   "en": "Grid Inverter: 14 Enc. power fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 14 Enc. power fail"
   ],
   "repaired": false
  },
  "并网逆变器： 15接触器15V失败": {
   "en": "Grid Inverter: 15 cont. 15V fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 15 cont. 15V fail"
   ],
   "repaired": false
  },
  "并网逆变器： 16 24V OUTP失败": {
   "en": "Grid Inverter: 16 24V outp fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 16 24V outp fail"
   ],
   "repaired": false
  },
  "并网逆变器： 19新的PCB": {
   "en": "Grid Inverter: 19 New PCB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 19 New PCB"
   ],
   "repaired": false
  },
  "并网逆变器： 21 MTRIP": {
   "en": "Grid Inverter: 21 MTRIP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 21 MTRIP"
   ],
   "repaired": false
  },
  "并网逆变器： 22电机I2T": {
   "en": "Grid Inverter: 22 Motor I2T",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 22 Motor I2T"
   ],
   "repaired": false
  },
  "并网逆变器： 23 RS232亏损": {
   "en": "Grid Inverter: 23 RS232 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 23 RS232 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 24 RS485亏损": {
   "en": "Grid Inverter: 24 RS485 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 24 RS485 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 25内部参考失败": {
   "en": "Grid Inverter: 25 internal ref. fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 25 int. ref. fail"
   ],
   "repaired": false
  },
  "并网逆变器： 26温度低": {
   "en": "Grid Inverter: 26 temp low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 26 temp low"
   ],
   "repaired": false
  },
  "并网逆变器： 27按键丢失": {
   "en": "Grid Inverter: 27 Keypad loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 27 Keypad loss"
   ],
   "repaired": false
  },
  "并网逆变器： 28电流不平衡": {
   "en": "Grid Inverter: 28 current imbalance",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 28 Curr imbalance"
   ],
   "repaired": false
  },
  "并网逆变器： 29预充电失败": {
   "en": "Grid Inverter: 29 Precharge fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 29 Precharge fail"
   ],
   "repaired": false
  },
  "并网逆变器： 30驱动器ID失败": {
   "en": "Grid Inverter: 30 drive ID fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 30 drive ID fail"
   ],
   "repaired": false
  },
  "并网逆变器： 31 D1U 电流高": {
   "en": "Grid Inverter: 31 D1U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 31 D1U curr. high"
   ],
   "repaired": false
  },
  "ISU错误： LSU EXT DI1 （ 1082 ）": {
   "en": "ISU ERR: LSU EXT DI1 (1082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 32 D1U温度高": {
   "en": "Grid Inverter: 32 D1U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 32 D1U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 33 D1V 电流高": {
   "en": "Grid Inverter: 33 D1V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 33 D1V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 34 D1V温度高": {
   "en": "Grid Inverter: 34 D1V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 34 D1V temp. high"
   ],
   "repaired": false
  },
  "ISU错误： INV CUR LIM （ 2212 ）": {
   "en": "ISU ERR: INV CUR LIM (2212)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： MOT CUR LIM （ 2300）": {
   "en": "ISU ERR: MOT CUR LIM (2300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 直流-BUS LIM （ 3211 ）": {
   "en": "ISU ERR: DC BUS LIM (3211)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 35 D1W电流高": {
   "en": "Grid Inverter: 35 D1W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 35 D1W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 36 D1W温度高": {
   "en": "Grid Inverter: 36 D1W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 36 D1W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 37 D1ext跳闸": {
   "en": "Grid Inverter: 37 D1 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 37 D1 ext trip"
   ],
   "repaired": false
  },
  "并网逆变器： 38 D1伏特值高": {
   "en": "Grid Inverter: 38 D1 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 38 D1 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 39 D1增强DIB": {
   "en": "Grid Inverter: 39 D1 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 39 D1 enhanced DIB"
   ],
   "repaired": false
  },
  "并网逆变器： 40 D2U 电流高": {
   "en": "Grid Inverter: 40 D2U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 40 D2U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 41 D2U温度高": {
   "en": "Grid Inverter: 41 D2U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 41 D2U temp. high"
   ],
   "repaired": false
  },
  "ISU错误： LSU NET 电压 （ 3285 ）": {
   "en": "ISU ERR: LSU NET VOLT (3285)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 42 D2V 电流高": {
   "en": "Grid Inverter: 42 D2V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 42 D2V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 43 D2V温度高": {
   "en": "Grid Inverter: 43 D2V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 43 D2V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 44 D2W 电流高": {
   "en": "Grid Inverter: 44 D2W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 44 D2W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 45 D2W温度高": {
   "en": "Grid Inverter: 45 D2W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 45 D2W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 46 D2转跳闸": {
   "en": "Grid Inverter: 46 D2 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 46 D2 ext trip"
   ],
   "repaired": false
  },
  "并网逆变器： 47 D2伏特值高": {
   "en": "Grid Inverter: 47 D2 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 47 D2 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 48 D2增强DIB": {
   "en": "Grid Inverter: 48 D2 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 48 D2 enhanced DIB"
   ],
   "repaired": false
  },
  "ISU错误： EXT AIO （ 7081 ）": {
   "en": "ISU ERR: EXT AIO (7081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT DIO （ 7082 ）": {
   "en": "ISU ERR: EXT DIO (7082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 49 D3U 电流高": {
   "en": "Grid Inverter: 49 D3U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 49 D3U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 50 D3U温度高": {
   "en": "Grid Inverter: 50 D3U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 50 D3U temp. high"
   ],
   "repaired": false
  },
  "ISU错误： LSU同步RO （ 8180 ）": {
   "en": "ISU ERR: LSU synchronzationHRO (8180)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: LSU SYNCHRO (8180)"
   ],
   "repaired": false
  },
  "ISU错误： EM 停止（ F081 ）": {
   "en": "ISU ERR: EM STOP (F081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EM 停止DEC（ F082 ）": {
   "en": "ISU ERR: EM STOP DEC (F082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID MAGN REQ （ FF30 ）": {
   "en": "ISU ERR: ID MAGN REQ (FF30)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID MAGN （ FF31 ）": {
   "en": "ISU ERR: ID MAGN (FF31)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID DONE （ FF32 ）": {
   "en": "ISU ERR: ID DONE (FF32)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID 运行 SEL （ FF33 ）": {
   "en": "ISU ERR: ID RUN SEL (FF33)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 51 D3V 电流高": {
   "en": "Grid Inverter: 51 D3V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 51 D3V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 52 D3V温度高": {
   "en": "Grid Inverter: 52 D3V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 52 D3V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 53 D3W 电流高": {
   "en": "Grid Inverter: 53 D3W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 53 D3W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 54 D3W温度高": {
   "en": "Grid Inverter: 54 D3W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 54 D3W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 55 D3分机跳闸": {
   "en": "Grid Inverter: 55 D3 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 55 D3 ext trip"
   ],
   "repaired": false
  },
  "并网逆变器： 56 D3伏特值高": {
   "en": "Grid Inverter: 56 D3 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 56 D3 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 57超速": {
   "en": "Grid Inverter: 57 overspeed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 57 overspeed"
   ],
   "repaired": false
  },
  "并网逆变器： 58 电流 控制失败": {
   "en": "Grid Inverter: 58 currentent ctrl. fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 58 curr. ctrl. fail"
   ],
   "repaired": false
  },
  "并网逆变器： 59校准运行失败": {
   "en": "Grid Inverter: 59 calibration. run fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 59 Calib. run fail"
   ],
   "repaired": false
  },
  "并网逆变器： 60不合适马达": {
   "en": "Grid Inverter: 60 Unsuit. motor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 60 Unsuit. motor"
   ],
   "repaired": false
  },
  "并网逆变器： 61编码器丢失": {
   "en": "Grid Inverter: 61 Encoder loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 61 Encoder loss"
   ],
   "repaired": false
  },
  "并网逆变器： 62用户跳闸1": {
   "en": "Grid Inverter: 62 user trip 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 62 user trip 1"
   ],
   "repaired": false
  },
  "并网逆变器： 63现场总线亏损": {
   "en": "Grid Inverter: 63 Fieldbus loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 63 Fieldbus loss"
   ],
   "repaired": false
  },
  "并网逆变器： 64负载高失败": {
   "en": "Grid Inverter: 64 load fail high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 64 load fail high"
   ],
   "repaired": false
  },
  "并网逆变器： 65负载故障低": {
   "en": "Grid Inverter: 65 Load fail low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 65 Load fail low"
   ],
   "repaired": false
  },
  "ISU错误： MOT TORQ LIM （ FF85 ）": {
   "en": "ISU ERR: MOT TORQ LIM (FF85)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： MOT POW LIM （ FF86 ）": {
   "en": "ISU ERR: MOT POW LIM (FF86)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 66电机PTC跳闸": {
   "en": "Grid Inverter: 66 Motor PTC trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 66 Motor PTC trip"
   ],
   "repaired": false
  },
  "并网逆变器： 67制动电阻跳闸": {
   "en": "Grid Inverter: 67 DB res. trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 67 DB res. trip"
   ],
   "repaired": false
  },
  "并网逆变器： 68未知驱动器的大小": {
   "en": "Grid Inverter: 68 Unkn. drive size",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 68 Unkn. drive size"
   ],
   "repaired": false
  },
  "并网逆变器： 71速度反馈损失": {
   "en": "Grid Inverter: 71 Speed feedback. loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 71 Speed feedb. loss"
   ],
   "repaired": false
  },
  "并网逆变器： 72频高": {
   "en": "Grid Inverter: 72 frequence high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 72 Freq. high"
   ],
   "repaired": false
  },
  "并网逆变器： 73用户跳闸2": {
   "en": "Grid Inverter: 73 user trip 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 73 user trip 2"
   ],
   "repaired": false
  },
  "并网逆变器： 74 D3增强DIB": {
   "en": "Grid Inverter: 74 D3 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 74 D3 enhanced DIB"
   ],
   "repaired": false
  },
  "并网逆变器： 75 D4U 电流高": {
   "en": "Grid Inverter: 75 D4U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 75 D4U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 76 D4U温度高": {
   "en": "Grid Inverter: 76 D4U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 76 D4U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 77 D4V 电流高": {
   "en": "Grid Inverter: 77 D4V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 77 D4V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 78 D4V温度高": {
   "en": "Grid Inverter: 78 D4V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 78 D4V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 79 D4W 电流高": {
   "en": "Grid Inverter: 79 D4W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 79 D4W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 80 D4W温度高": {
   "en": "Grid Inverter: 80 D4W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 80 D4W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 82 D4伏特值高": {
   "en": "Grid Inverter: 82 D4 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 82 D4 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 83 D4增强的DIB": {
   "en": "Grid Inverter: 83 D4 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 83 D4 enhanced DIB"
   ],
   "repaired": false
  },
  "并网逆变器： 84 D5U 电流高": {
   "en": "Grid Inverter: 84 D5U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 84 D5U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 85 D5U温度高": {
   "en": "Grid Inverter: 85 D5U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 85 D5U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 86 D5V 电流高": {
   "en": "Grid Inverter: 86 D5V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 86 D5V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 87 D5V温度高": {
   "en": "Grid Inverter: 87 D5V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 87 D5V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 88 D5W 电流高": {
   "en": "Grid Inverter: 88 D5W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 88 D5W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 89 D5W温度高": {
   "en": "Grid Inverter: 89 D5W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 89 D5W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 90 D5外部跳闸": {
   "en": "Grid Inverter: 90 D5 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 90 D5 ext trip"
   ],
   "repaired": false
  },
  "并网逆变器： 91 D5伏特值高": {
   "en": "Grid Inverter: 91 D5 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 91 D5 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 92 D5增强DIB": {
   "en": "Grid Inverter: 92 D5 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 92 D5 enhanced DIB"
   ],
   "repaired": false
  },
  "并网逆变器： 94 SFE 同步电源损耗": {
   "en": "Grid Inverter: 94 SFE synchronzation mains loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 94 SFE Sync mains loss"
   ],
   "repaired": false
  },
  "并网逆变器： 95 SFE伏主损失": {
   "en": "Grid Inverter: 95 SFE V mains loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 95 SFE V mains loss"
   ],
   "repaired": false
  },
  "并网逆变器： 96 SFE辅助相位损失": {
   "en": "Grid Inverter: 96 SFE aux ph.det.loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 96 SFE aux ph.det.loss"
   ],
   "repaired": false
  },
  "并网逆变器： 98 SFE扼流器PTC跳闸": {
   "en": "Grid Inverter: 98 SFE choke PTC trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 98 SFE choke PTC trip"
   ],
   "repaired": false
  },
  "并网逆变器： 99未知跳闸": {
   "en": "Grid Inverter: 99 Unknown trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 99 Unknown trip"
   ],
   "repaired": false
  },
  "并网逆变器： 100多余的输出电流": {
   "en": "Grid Inverter: 100 Excess output cur.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 100 Excess output cur."
   ],
   "repaired": false
  },
  "并网逆变器： 101电机温度": {
   "en": "Grid Inverter: 101 Motor thermostat",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 101 Motor thermostat"
   ],
   "repaired": false
  },
  "并网逆变器： 102电动机I2t": {
   "en": "Grid Inverter: 102 Motor I2T",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 102 Motor I2T"
   ],
   "repaired": false
  },
  "并网逆变器： 103电机PTC": {
   "en": "Grid Inverter: 103 Motor PTC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 103 Motor PTC"
   ],
   "repaired": false
  },
  "并网逆变器： 104制动电阻": {
   "en": "Grid Inverter: 104 DB resistor",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 104 DB resistor"
   ],
   "repaired": false
  },
  "并网逆变器： 105参考亏损": {
   "en": "Grid Inverter: 105 Reference loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 105 Reference loss"
   ],
   "repaired": false
  },
  "并网逆变器： 106 FBC 1负": {
   "en": "Grid Inverter: 106 FBC 1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 106 FBC 1 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 107温度高": {
   "en": "Grid Inverter: 107 Temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 107 Temp high"
   ],
   "repaired": false
  },
  "并网逆变器： 108温度低": {
   "en": "Grid Inverter: 108 Temp low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 108 Temp low"
   ],
   "repaired": false
  },
  "并网逆变器： 109 FBC损失2": {
   "en": "Grid Inverter: 109 FBC 2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 109 FBC 2 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 110备用参考损失": {
   "en": "Grid Inverter: 110 Backup ref. loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 110 Backup ref. loss"
   ],
   "repaired": false
  },
  "并网逆变器： 111 CAN总线2警告": {
   "en": "Grid Inverter: 111 CAN2 warnings",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 111 CAN2 warnings"
   ],
   "repaired": false
  },
  "并网逆变器： 112 RS232亏损": {
   "en": "Grid Inverter: 112 RS232 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 112 RS232 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 113 RS485亏损": {
   "en": "Grid Inverter: 113 RS485 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 113 RS485 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 114超速": {
   "en": "Grid Inverter: 114 Over speed",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 114 Over speed"
   ],
   "repaired": false
  },
  "并网逆变器： 115编码器丢失": {
   "en": "Grid Inverter: 115 Encoder loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 115 Encoder loss"
   ],
   "repaired": false
  },
  "并网逆变器： 116现场总线亏损": {
   "en": "Grid Inverter: 116 Fieldbus loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 116 Fieldbus loss"
   ],
   "repaired": false
  },
  "并网逆变器： 117 CAN总线2警告": {
   "en": "Grid Inverter: 117 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 117 CAN2 warning"
   ],
   "repaired": false
  },
  "并网逆变器： 118 CAN总线2警告": {
   "en": "Grid Inverter: 118 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 118 CAN2 warning"
   ],
   "repaired": false
  },
  "并网逆变器： 119 CAN总线2警告": {
   "en": "Grid Inverter: 119 CAN2 warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 119 CAN2 warning"
   ],
   "repaired": false
  },
  "并网逆变器： 120内部软件故障": {
   "en": "Grid Inverter: 120 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 120 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 121内部软件故障": {
   "en": "Grid Inverter: 121 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 121 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 122内部软件故障": {
   "en": "Grid Inverter: 122 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 122 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 123内部软件故障": {
   "en": "Grid Inverter: 123 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 123 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 124内部软件故障": {
   "en": "Grid Inverter: 124 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 124 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 125内部软件故障": {
   "en": "Grid Inverter: 125 Internal SW fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 125 Internal SW fault"
   ],
   "repaired": false
  },
  "并网逆变器： 128负载故障高": {
   "en": "Grid Inverter: 128 Load fault high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 128 Load fault high"
   ],
   "repaired": false
  },
  "并网逆变器： 129负载故障低": {
   "en": "Grid Inverter: 129 Load fault low",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 129 Load fault low"
   ],
   "repaired": false
  },
  "并网逆变器： 130CAN总线警告": {
   "en": "Grid Inverter: 130 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 130 CAN warning"
   ],
   "repaired": false
  },
  "并网逆变器： 131CAN总线警告": {
   "en": "Grid Inverter: 131 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 131 CAN warning"
   ],
   "repaired": false
  },
  "并网逆变器： 132可警告": {
   "en": "Grid Inverter: 132 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 132 CAN warning"
   ],
   "repaired": false
  },
  "并网逆变器： 133 SFE电源频率": {
   "en": "Grid Inverter: 133 SFE mains frequence",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 133 SFE mains freq."
   ],
   "repaired": false
  },
  "并网逆变器： 134 SFE同步亏损": {
   "en": "Grid Inverter: 134 SFE synchronzationh loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 134 SFE synch loss"
   ],
   "repaired": false
  },
  "并网逆变器： 135总线警告": {
   "en": "Grid Inverter: 135 CAN warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 135 CAN warning"
   ],
   "repaired": false
  },
  "并网逆变器： 136 SFE LCN 反馈": {
   "en": "Grid Inverter: 136 SFE LCN feedbackack",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 136 SFE LCN feedback"
   ],
   "repaired": false
  },
  "并网逆变器： 137 SFE扼流PTC": {
   "en": "Grid Inverter: 137 SFE Choke PTC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 137 SFE Choke PTC"
   ],
   "repaired": false
  },
  "并网逆变器： 138 DB处于非活动状态": {
   "en": "Grid Inverter: 138 DB inactive",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 138 DB inactive"
   ],
   "repaired": false
  },
  "并网逆变器： 139 U相共享": {
   "en": "Grid Inverter: 139 U-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 139 U-phase sharing"
   ],
   "repaired": false
  },
  "并网逆变器： 140 V相共享": {
   "en": "Grid Inverter: 140 V-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 140 V-phase sharing"
   ],
   "repaired": false
  },
  "并网逆变器： 141 W相共享": {
   "en": "Grid Inverter: 141 W-phase sharing",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 141 W-phase sharing"
   ],
   "repaired": false
  },
  "并网逆变器： 142电源放大器警告": {
   "en": "Grid Inverter: 142 Mains amp. warning",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 142 Mains amp. warning"
   ],
   "repaired": false
  },
  "并网逆变器： 143以太网通道1丢失": {
   "en": "Grid Inverter: 143 Ethernet ch.1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 143 Ethernet ch.1 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 144以太网通道2丢失": {
   "en": "Grid Inverter: 144 Ethernet ch.2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 144 Ethernet ch.2 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 145保留": {
   "en": "Grid Inverter: 145 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 145 Reserved"
   ],
   "repaired": false
  },
  "并网逆变器： 146保留": {
   "en": "Grid Inverter: 146 Reserved",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 146 Reserved"
   ],
   "repaired": false
  },
  "并网逆变器： 147下载进行中": {
   "en": "Grid Inverter: 147 Download in progr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 147 Download in progr."
   ],
   "repaired": false
  },
  "并网逆变器： 148 DSP启动": {
   "en": "Grid Inverter: 148 DSP Booting",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 148 DSP Booting"
   ],
   "repaired": false
  },
  "并网逆变器： 149 DSP上运行抑制": {
   "en": "Grid Inverter: 149 DSP run inhibit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 149 DSP run inhibit"
   ],
   "repaired": false
  },
  "并网逆变器： 150 PWM误差": {
   "en": "Grid Inverter: 150 PWM error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 150 PWM error"
   ],
   "repaired": false
  },
  "并网逆变器： 151 DB跳闸": {
   "en": "Grid Inverter: 151 DB trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 151 DB trip"
   ],
   "repaired": false
  },
  "并网逆变器： 152 DB硬件温度高": {
   "en": "Grid Inverter: 152 DB HW temp high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 152 DB HW temp high"
   ],
   "repaired": false
  },
  "并网逆变器： 153 D6U 电流高": {
   "en": "Grid Inverter: 153 D6U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 153 D6U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 154 D6U温度高": {
   "en": "Grid Inverter: 154 D6U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 154 D6U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 155 D6V 电流高": {
   "en": "Grid Inverter: 155 D6V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 155 D6V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 156 D6V温度高": {
   "en": "Grid Inverter: 156 D6V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 156 D6V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 157 D6W 电流高": {
   "en": "Grid Inverter: 157 D6W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 157 D6W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 158 D6W温度高": {
   "en": "Grid Inverter: 158 D6W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 158 D6W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 159 D6分机跳闸": {
   "en": "Grid Inverter: 159 D6 ext trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 159 D6 ext trip"
   ],
   "repaired": false
  },
  "ISU错误： RT净丢失（ 32A1 ）": {
   "en": "ISU ERR: RT NET LOST  (32A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 160 D6伏特值高": {
   "en": "Grid Inverter: 160 D6 volt high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 160 D6 volt high"
   ],
   "repaired": false
  },
  "并网逆变器： 161 D6增强DIB": {
   "en": "Grid Inverter: 161 D6 enhanced DIB",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 161 D6 enhanced DIB"
   ],
   "repaired": false
  },
  "并网逆变器： 162 DB1U 电流高": {
   "en": "Grid Inverter: 162 DB1U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 162 DB1U curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 163 DB1U温度高": {
   "en": "Grid Inverter: 163 DB1U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 163 DB1U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 164 DB1V 电流高": {
   "en": "Grid Inverter: 164 DB1V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 164 DB1V curr. high"
   ],
   "repaired": false
  },
  "ISU警告 ： AI <MIN FUNC （ 8110 ）": {
   "en": "ISU WARN: AI<MIN FUNC (8110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 165 DB1V温度高": {
   "en": "Grid Inverter: 165 DB1V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 165 DB1V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 166 DB1W 电流高": {
   "en": "Grid Inverter: 166 DB1W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 166 DB1W curr. high"
   ],
   "repaired": false
  },
  "ISU警告 ： EXT ANALOG IO (7081)": {
   "en": "ISU WARN: EXT ANALOG IO (7081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 167 DB1W温度高": {
   "en": "Grid Inverter: 167 DB1W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 167 DB1W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 168 DB1外部跳闸": {
   "en": "Grid Inverter: 168 DB1 external trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 168 DB1 Ext. trip"
   ],
   "repaired": false
  },
  "并网逆变器： 169 DB1电压高": {
   "en": "Grid Inverter: 169 DB1 voltage high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 169 DB1 voltage high"
   ],
   "repaired": false
  },
  "并网逆变器： 170 DB1 电流高": {
   "en": "Grid Inverter: 170 DB1 currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 170 DB1 curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 171 DB2U 电流高": {
   "en": "Grid Inverter: 171 DB2U currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 171 DB2U curr. high"
   ],
   "repaired": false
  },
  "ISU警告 ： currentENT LIM": {
   "en": "ISU WARN: currentENT LIM",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU WARN: CURRENT LIM"
   ],
   "repaired": false
  },
  "并网逆变器： 172 DB2U温度高": {
   "en": "Grid Inverter: 172 DB2U temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 172 DB2U temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 173 DB2V 电流高": {
   "en": "Grid Inverter: 173 DB2V currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 173 DB2V curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 174 DB2V温度高": {
   "en": "Grid Inverter: 174 DB2V temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 174 DB2V temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 175 DB2W 电流高": {
   "en": "Grid Inverter: 175 DB2W currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 175 DB2W curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 176 DB2W温度高": {
   "en": "Grid Inverter: 176 DB2W temperature high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 176 DB2W temp. high"
   ],
   "repaired": false
  },
  "并网逆变器： 177 DB2外部跳闸": {
   "en": "Grid Inverter: 177 DB2 external trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 177 DB2 Ext. trip"
   ],
   "repaired": false
  },
  "并网逆变器： 178 DB2电压高": {
   "en": "Grid Inverter: 178 DB2 voltage high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 178 DB2 voltage high"
   ],
   "repaired": false
  },
  "并网逆变器： 179 DB2 电流高": {
   "en": "Grid Inverter: 179 DB2 currentent high",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 179 DB2 curr. high"
   ],
   "repaired": false
  },
  "并网逆变器： 180 PIB的FPGA 配置失败": {
   "en": "Grid Inverter: 180 PIB FPGA conf.fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 180 PIB FPGA conf.fail"
   ],
   "repaired": false
  },
  "并网逆变器： 181 SMPS未识别": {
   "en": "Grid Inverter: 181 unidentified SMPS",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 181 Unident. SMPS"
   ],
   "repaired": false
  },
  "并网逆变器： 182 D1未识别": {
   "en": "Grid Inverter: 182 unidentified D1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 182 Unident. D1"
   ],
   "repaired": false
  },
  "并网逆变器： 183 SMPS1未识别": {
   "en": "Grid Inverter: 183 unidentified SMPS1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 183 Unident. SMPS1"
   ],
   "repaired": false
  },
  "并网逆变器： 184 D1不正确": {
   "en": "Grid Inverter: 184 Incorrect D1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 184 Incorr. D1"
   ],
   "repaired": false
  },
  "并网逆变器： 185 D2未识别": {
   "en": "Grid Inverter: 185 unidentified D2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 185 Unident. D2"
   ],
   "repaired": false
  },
  "并网逆变器： 186 SMPS2未识别": {
   "en": "Grid Inverter: 186 unidentified SMPS2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 186 Unident. SMPS2"
   ],
   "repaired": false
  },
  "并网逆变器： 187 D2不正确": {
   "en": "Grid Inverter: 187 Incorrect D2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 187 Incorr. D2"
   ],
   "repaired": false
  },
  "并网逆变器： 188 D3未识别": {
   "en": "Grid Inverter: 188 unidentified D3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 188 Unident. D3"
   ],
   "repaired": false
  },
  "并网逆变器： 189未识别SMPS3": {
   "en": "Grid Inverter: 189 unidentified SMPS3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 189 Unident. SMPS3"
   ],
   "repaired": false
  },
  "并网逆变器： 190 D3不正确": {
   "en": "Grid Inverter: 190 Incorrect D3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 190 Incorr. D3"
   ],
   "repaired": false
  },
  "并网逆变器： 191 D4未识别": {
   "en": "Grid Inverter: 191 unidentified D4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 191 Unident. D4"
   ],
   "repaired": false
  },
  "并网逆变器： 192未识别SMPS4": {
   "en": "Grid Inverter: 192 unidentified SMPS4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 192 Unident. SMPS4"
   ],
   "repaired": false
  },
  "并网逆变器： 193 D4不正确": {
   "en": "Grid Inverter: 193 Incorrect D4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 193 Incorr. D4"
   ],
   "repaired": false
  },
  "并网逆变器： 194 D5未识别": {
   "en": "Grid Inverter: 194 unidentified D5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 194 Unident. D5"
   ],
   "repaired": false
  },
  "ISU警告 ：P LIM外部温度": {
   "en": "ISU WARN: P LIM EXT TEMP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：Q LIM外部温度": {
   "en": "ISU WARN: Q LIM EXT TEMP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：Q LIM ACS800 温度": {
   "en": "ISU WARN: Q LIM ACS800 TEMP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 195未识别SMPS5": {
   "en": "Grid Inverter: 195 unidentified SMPS5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 195 Unident. SMPS5"
   ],
   "repaired": false
  },
  "并网逆变器： 196 D5不正确": {
   "en": "Grid Inverter: 196 Incorrect D5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 196 Incorr. D5"
   ],
   "repaired": false
  },
  "并网逆变器： 197 D6未识别": {
   "en": "Grid Inverter: 197 unidentified D6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 197 Unident. D6"
   ],
   "repaired": false
  },
  "并网逆变器： 198未识别SMPS6": {
   "en": "Grid Inverter: 198 unidentified SMPS6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 198 Unident. SMPS6"
   ],
   "repaired": false
  },
  "并网逆变器： 199错误D6": {
   "en": "Grid Inverter: 199 Incorrect D6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 199 Incorr. D6"
   ],
   "repaired": false
  },
  "并网逆变器： 200 CAN总线1丢失": {
   "en": "Grid Inverter: 200 CAN1 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 200 CAN1 loss"
   ],
   "repaired": false
  },
  "并网逆变器： 203 CAN总线2亏损": {
   "en": "Grid Inverter: 203 CAN2 loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 203 CAN2 loss"
   ],
   "repaired": false
  },
  "ISU警告 ： AI <MIN FUNC （ 8184 ）": {
   "en": "ISU WARN: AI<MIN FUNC (8184)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 205客户自定义": {
   "en": "Grid Inverter: 205 Customer special",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 205 Customer special"
   ],
   "repaired": false
  },
  "并网逆变器： 206客户自定义": {
   "en": "Grid Inverter: 206 Customer special",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 206 Customer special"
   ],
   "repaired": false
  },
  "并网逆变器： 207 U-相值共享失败": {
   "en": "Grid Inverter: 207 U-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 207 U-ph sharing fail"
   ],
   "repaired": false
  },
  "ISU警告 ： MOD BOARD T (FF92)": {
   "en": "ISU WARN: MOD BOARD T (FF92)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： MOD CHOKE T (FF93)": {
   "en": "ISU WARN: MOD CHOKE T (FF93)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 208 V-相共享失败": {
   "en": "Grid Inverter: 208 V-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 208 V-ph sharing fail"
   ],
   "repaired": false
  },
  "并网逆变器： 209 W-相值共享失败": {
   "en": "Grid Inverter: 209 W-ph sharing fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 209 W-ph sharing fail"
   ],
   "repaired": false
  },
  "并网逆变器： 210电源幅度": {
   "en": "Grid Inverter: 210 Mains amplitude",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 210 Mains amplitude"
   ],
   "repaired": false
  },
  "并网逆变器： 211不是40 MHz的C直流": {
   "en": "Grid Inverter: 211 Not 40 Mhz CDC",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 211 Not 40 Mhz CDC"
   ],
   "repaired": false
  },
  "并网逆变器： 212未找出原因， DELTA1": {
   "en": "Grid Inverter: 212 Undiagnosed,DELTA1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 212 Undiagnosed,DELTA1"
   ],
   "repaired": false
  },
  "并网逆变器： 213未找出原因， DELTA2": {
   "en": "Grid Inverter: 213 Undiagnosed,DELTA2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 213 Undiagnosed,DELTA2"
   ],
   "repaired": false
  },
  "并网逆变器： 214未找出原因， DELTA3": {
   "en": "Grid Inverter: 214 Undiagnosed,DELTA3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 214 Undiagnosed,DELTA3"
   ],
   "repaired": false
  },
  "并网逆变器： 215未找出原因， DELTA4": {
   "en": "Grid Inverter: 215 Undiagnosed,DELTA4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 215 Undiagnosed,DELTA4"
   ],
   "repaired": false
  },
  "并网逆变器： 216未找出原因， DELTA5": {
   "en": "Grid Inverter: 216 Undiagnosed,DELTA5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 216 Undiagnosed,DELTA5"
   ],
   "repaired": false
  },
  "并网逆变器： 217未找出原因， DELTA6": {
   "en": "Grid Inverter: 217 Undiagnosed,DELTA6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 217 Undiagnosed,DELTA6"
   ],
   "repaired": false
  },
  "ISU错误： EXT 温度1高（ 4491 ）": {
   "en": "ISU ERR: EXT TMP1 HIGH (4491)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度2高（ 4492 ）": {
   "en": "ISU ERR: EXT TMP2 HIGH (4492)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度3高（ 4493 ）": {
   "en": "ISU ERR: EXT TMP3 HIGH (4493)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度4高（ 4494 ）": {
   "en": "ISU ERR: EXT TMP4 HIGH (4494)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度1低（ 4495 ）": {
   "en": "ISU ERR: EXT TMP1 LOW (4495)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度2低（ 4496 ）": {
   "en": "ISU ERR: EXT TMP2 LOW (4496)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度3低（ 4497 ）": {
   "en": "ISU ERR: EXT TMP3 LOW (4497)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT 温度4低（ 4498 ）": {
   "en": "ISU ERR: EXT TMP4 LOW (4498)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度1高（ 44A3 ）": {
   "en": "ISU WARN: EXT TMP1 HIGH (44A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度2高（ 44A4 ）": {
   "en": "ISU WARN: EXT TMP2 HIGH (44A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度3高（ 44A5 ）": {
   "en": "ISU WARN: EXT TMP3 HIGH (44A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度4高（ 44A6 ）": {
   "en": "ISU WARN: EXT TMP4 HIGH (44A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度1低（ 44A7 ）": {
   "en": "ISU WARN: EXT TMP1 LOW (44A7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度2低（ 44A8 ）": {
   "en": "ISU WARN: EXT TMP2 LOW (44A8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度3低（ 44A9 ）": {
   "en": "ISU WARN: EXT TMP3 LOW (44A9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度4低（ 44AA ​​）": {
   "en": "ISU WARN: EXT TMP4 LOW (44AA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 218未找出原因， DB1": {
   "en": "Grid Inverter: 218 Undiagnosed, DB1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 218 Undiagnosed, DB1"
   ],
   "repaired": false
  },
  "并网逆变器： 219未找出原因， DB2": {
   "en": "Grid Inverter: 219 Undiagnosed, DB2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 219 Undiagnosed, DB2"
   ],
   "repaired": false
  },
  "并网逆变器： 222扭力证明失败": {
   "en": "Grid Inverter: 222 Torque prove fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 222 Torque prove fail"
   ],
   "repaired": false
  },
  "并网逆变器： 223制动释放失败": {
   "en": "Grid Inverter: 223 Brake release fail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 223 Brake release fail"
   ],
   "repaired": false
  },
  "并网逆变器： 224下载在程序控制": {
   "en": "Grid Inverter: 224 Download in progr.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 224 Download in progr."
   ],
   "repaired": false
  },
  "并网逆变器： 225未知跳闸": {
   "en": "Grid Inverter: 225 unknown trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 225 unknown trip"
   ],
   "repaired": false
  },
  "并网逆变器： 226未知跳闸": {
   "en": "Grid Inverter: 226 unknown trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 226 unknown trip"
   ],
   "repaired": false
  },
  "并网逆变器： 227 DSP交流过压": {
   "en": "Grid Inverter: 227 DSP ac overvoltage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 227 DSP ac overvoltage"
   ],
   "repaired": false
  },
  "并网逆变器： 228 DSP的扫描溢出": {
   "en": "Grid Inverter: 228 DSP Scan Overrun",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 228 DSP Scan Overrun"
   ],
   "repaired": false
  },
  "并网逆变器： 229 DSP通讯故障": {
   "en": "Grid Inverter: 229 DSP comms failure",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 229 DSP comms failure"
   ],
   "repaired": false
  },
  "并网逆变器： 230用户警报1": {
   "en": "Grid Inverter: 230 User alert 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 230 Cap. Fan Fault"
   ],
   "repaired": false
  },
  "并网逆变器： 231用户警报2": {
   "en": "Grid Inverter: 231 User alert 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 231 DC Bus Low"
   ],
   "repaired": false
  },
  "并网逆变器： 232用户警报3": {
   "en": "Grid Inverter: 232 User alert 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 232 User alert 3"
   ],
   "repaired": false
  },
  "并网逆变器： 233用户警报4": {
   "en": "Grid Inverter: 233 User alert 4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 233 User alert 4"
   ],
   "repaired": false
  },
  "并网逆变器： 234用户警报5": {
   "en": "Grid Inverter: 234 User alert 5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 234 User alert 5"
   ],
   "repaired": false
  },
  "ISU错误： AGDR 配置 （ 548B ）": {
   "en": "ISU ERR: AGDR CONFIG (548B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：AINT？ 配置 （ 548C ）": {
   "en": "ISU ERR: AINT? CONFIG (548C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT DIO （ 7082 ）": {
   "en": "ISU WARN: EXT DIO (7082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：同步RO FLT （ 8180 ）": {
   "en": "ISU ERR: synchronzationHRO FLT (8180)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: SYNCHRO FLT (8180)"
   ],
   "repaired": false
  },
  "并网逆变器： 235用户警报6": {
   "en": "Grid Inverter: 235 User alert 6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 235 User alert 6"
   ],
   "repaired": false
  },
  "ISU错误： EXT EVNT DI4 （ 9084 ）": {
   "en": "ISU ERR: EXT EVNT DI4 (9084)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT EVNT DI5 （ 9085 ）": {
   "en": "ISU ERR: EXT EVNT DI5 (9085)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： EXT EVNT DI7 （ 9087 ）": {
   "en": "ISU ERR: EXT EVNT DI7 (9087)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 236用户警报7": {
   "en": "Grid Inverter: 236 User alert 7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 236 User alert 7"
   ],
   "repaired": false
  },
  "ISU警告 ： EXT EVNT DI4 （ 908B ）": {
   "en": "ISU WARN: EXT EVNT DI4 (908B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 237用户警报8": {
   "en": "Grid Inverter: 237 User alert 8",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 237 User alert 8"
   ],
   "repaired": false
  },
  "并网逆变器： 238用户警报9": {
   "en": "Grid Inverter: 238 User alert 9",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 238 User alert 9"
   ],
   "repaired": false
  },
  "并网逆变器： 239用户警报10": {
   "en": "Grid Inverter: 239 User alert 10",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 239 User alert 10"
   ],
   "repaired": false
  },
  "并网逆变器： 240Delta1 DIB 5V": {
   "en": "Grid Inverter: 240 Delta 1 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 240 Delta 1 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 241Delta1 DIB +15 V": {
   "en": "Grid Inverter: 241 Delta 1 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 241 Delta 1 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 242Delta1 DIB-15V": {
   "en": "Grid Inverter: 242 Delta 1 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 242 Delta 1 DIB -15v"
   ],
   "repaired": false
  },
  "ISU错误： APPL.WaterEND （ FF5D ）": {
   "en": "ISU ERR: APPL.WaterEND (FF5D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: APPL.W.END (FF5D)"
   ],
   "repaired": false
  },
  "并网逆变器： 243Delta1 DIB风扇": {
   "en": "Grid Inverter: 243 Delta 1 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 243 Delta 1 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 244Delta1 DIB > fU": {
   "en": "Grid Inverter: 244 Delta 1 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 244 Delta 1 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 245Delta1 DIB > fV": {
   "en": "Grid Inverter: 245 Delta 1 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 245 Delta 1 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 246C1 DIB >f W": {
   "en": "Grid Inverter: 246 Delta 1 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 246 Delta 1 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 247Delta1 DIB TDU": {
   "en": "Grid Inverter: 247 Delta 1 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 247 Delta 1 DIB Td U"
   ],
   "repaired": false
  },
  "并网逆变器： 248Delta1 DIB TD V": {
   "en": "Grid Inverter: 248 Delta 1 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 248 Delta 1 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 249Delta1 DIB TD W": {
   "en": "Grid Inverter: 249 Delta 1 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 249 Delta 1 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 250Delta2 DIB 5V": {
   "en": "Grid Inverter: 250 Delta 2 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 250 Delta 2 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 251Delta2 DIB +15 V": {
   "en": "Grid Inverter: 251 Delta 2 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 251 Delta 2 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 252Delta2 DIB-15V": {
   "en": "Grid Inverter: 252 Delta 2 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 252 Delta 2 DIB -15v"
   ],
   "repaired": false
  },
  "并网逆变器： 253Delta2 DIB风扇": {
   "en": "Grid Inverter: 253 Delta 2 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 253 Delta 2 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 254Delta2 DIB > fU": {
   "en": "Grid Inverter: 254 Delta 2 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 254 Delta 2 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 255Delta2 DIB > F V": {
   "en": "Grid Inverter: 255 Delta 2 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 255 Delta 2 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 256Delta2 DIB >f W": {
   "en": "Grid Inverter: 256 Delta 2 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 256 Delta 2 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 257Delta2 DIB TDU": {
   "en": "Grid Inverter: 257 Delta 2 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 257 Delta 2 DIB Td U"
   ],
   "repaired": false
  },
  "并网逆变器： 258Delta2 DIB TD V": {
   "en": "Grid Inverter: 258 Delta 2 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 258 Delta 2 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 259Delta2 DIB TD W": {
   "en": "Grid Inverter: 259 Delta 2 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 259 Delta 2 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 260Delta3 DIB 5V": {
   "en": "Grid Inverter: 260 Delta 3 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 260 Delta 3 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 261Delta3 DIB +15 V": {
   "en": "Grid Inverter: 261 Delta 3 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 261 Delta 3 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 262Delta3 DIB-15V": {
   "en": "Grid Inverter: 262 Delta 3 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 262 Delta 3 DIB -15v"
   ],
   "repaired": false
  },
  "并网逆变器： 263Delta3 DIB风扇": {
   "en": "Grid Inverter: 263 Delta 3 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 263 Delta 3 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 264Delta3 DIB > fU": {
   "en": "Grid Inverter: 264 Delta 3 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 264 Delta 3 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 265Delta3 DIB > F V": {
   "en": "Grid Inverter: 265 Delta 3 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 265 Delta 3 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 266Delta3 DIB >f W": {
   "en": "Grid Inverter: 266 Delta 3 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 266 Delta 3 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 267Delta3 DIB TDU": {
   "en": "Grid Inverter: 267 Delta 3 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 267 Delta 3 DIB Td U"
   ],
   "repaired": false
  },
  "并网逆变器： 268Delta3 DIB TD V": {
   "en": "Grid Inverter: 268 Delta 3 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 268 Delta 3 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 269Delta3 DIB TD W": {
   "en": "Grid Inverter: 269 Delta 3 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 269 Delta 3 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 270Delta4 DIB 5V": {
   "en": "Grid Inverter: 270 Delta 4 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 270 Delta 4 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 271Delta4 DIB +15 V": {
   "en": "Grid Inverter: 271 Delta 4 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 271 Delta 4 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 272Delta4 DIB-15V": {
   "en": "Grid Inverter: 272 Delta 4 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 272 Delta 4 DIB -15v"
   ],
   "repaired": false
  },
  "并网逆变器： 273Delta4 DIB风扇": {
   "en": "Grid Inverter: 273 Delta 4 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 273 Delta 4 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 274Delta4 DIB > fU": {
   "en": "Grid Inverter: 274 Delta 4 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 274 Delta 4 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 275Delta4 DIB > F V": {
   "en": "Grid Inverter: 275 Delta 4 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 275 Delta 4 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 276Delta4 DIB >f W": {
   "en": "Grid Inverter: 276 Delta 4 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 276 Delta 4 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 277Delta4 DIB TDU": {
   "en": "Grid Inverter: 277 Delta 4 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 277 Delta 4 DIB Td U"
   ],
   "repaired": false
  },
  "并网逆变器： 278Delta4 DIB TD V": {
   "en": "Grid Inverter: 278 Delta 4 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 278 Delta 4 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 279Delta4 DIB TD W": {
   "en": "Grid Inverter: 279 Delta 4 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 279 Delta 4 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 280Delta5 DIB 5V": {
   "en": "Grid Inverter: 280 Delta 5 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 280 Delta 5 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 281Delta5 DIB +15 V": {
   "en": "Grid Inverter: 281 Delta 5 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 281 Delta 5 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 282Delta5 DIB-15V": {
   "en": "Grid Inverter: 282 Delta 5 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 282 Delta 5 DIB -15v"
   ],
   "repaired": false
  },
  "并网逆变器： 283Delta5 DIB风扇": {
   "en": "Grid Inverter: 283 Delta 5 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 283 Delta 5 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 284Delta5 DIB > fU": {
   "en": "Grid Inverter: 284 Delta 5 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 284 Delta 5 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 285Delta5 DIB > F V": {
   "en": "Grid Inverter: 285 Delta 5 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 285 Delta 5 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 286Delta5 DIB >f W": {
   "en": "Grid Inverter: 286 Delta 5 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 286 Delta 5 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 287Delta5 DIB TDU": {
   "en": "Grid Inverter: 287 Delta 5 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 287 Delta 5 DIB Td U"
   ],
   "repaired": false
  },
  "并网逆变器： 288Delta5 DIB TD V": {
   "en": "Grid Inverter: 288 Delta 5 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 288 Delta 5 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 289Delta5 DIB TD W": {
   "en": "Grid Inverter: 289 Delta 5 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 289 Delta 5 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 290Delta6 DIB 5V": {
   "en": "Grid Inverter: 290 Delta 6 DIB 5v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 290 Delta 6 DIB 5v"
   ],
   "repaired": false
  },
  "并网逆变器： 291Delta6 DIB +15 V": {
   "en": "Grid Inverter: 291 Delta 6 DIB +15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 291 Delta 6 DIB +15v"
   ],
   "repaired": false
  },
  "并网逆变器： 292Delta6 DIB-15V": {
   "en": "Grid Inverter: 292 Delta 6 DIB-15v",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 292 Delta 6 DIB -15v"
   ],
   "repaired": false
  },
  "并网逆变器： 293Delta6 DIB风扇": {
   "en": "Grid Inverter: 293 Delta 6 DIB Fan",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 293 Delta 6 DIB Fan"
   ],
   "repaired": false
  },
  "并网逆变器： 294Delta6 DIB > fU": {
   "en": "Grid Inverter: 294 Delta 6 DIB >f U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 294 Delta 6 DIB >f U"
   ],
   "repaired": false
  },
  "并网逆变器： 295Delta6 DIB > F V": {
   "en": "Grid Inverter: 295 Delta 6 DIB >f V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 295 Delta 6 DIB >f V"
   ],
   "repaired": false
  },
  "并网逆变器： 296Delta6 DIB >f W": {
   "en": "Grid Inverter: 296 Delta 6 DIB >f W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 296 Delta 6 DIB >f W"
   ],
   "repaired": false
  },
  "并网逆变器： 297Delta6 DIB TDU": {
   "en": "Grid Inverter: 297 Delta 6 DIB Td U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 297 Delta 6 DIB Td U"
   ],
   "repaired": false
  },
  "ABBINU （ 6881 ） ：文本数据溢出": {
   "en": "ABBINU (6881): Text data overf",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6882 ） ：文本32位TBL": {
   "en": "ABBINU (6882): Text 32-bit tbl",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6883 ） ：文本64位TBL": {
   "en": "ABBINU (6883): Text 64-bit tbl",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 6885 ） ：文本文件溢出": {
   "en": "ABBINU (6885): Text file overf",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7080 ） ：模式选项通讯": {
   "en": "ABBINU (7080): Option mod. com",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 298Delta6 DIB TD V": {
   "en": "Grid Inverter: 298 Delta 6 DIB Td V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 298 Delta 6 DIB Td V"
   ],
   "repaired": false
  },
  "并网逆变器： 299Delta6 DIB TD W": {
   "en": "Grid Inverter: 299 Delta 6 DIB Td W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 299 Delta 6 DIB Td W"
   ],
   "repaired": false
  },
  "并网逆变器： 300 PWM 同步脉冲": {
   "en": "Grid Inverter: 300 PWM synchronzation. Pulse",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 300 PWM Sync. Pulse"
   ],
   "repaired": false
  },
  "并网逆变器： 301未知跳闸": {
   "en": "Grid Inverter: 301 Unknown Trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 301 Unknown Trip"
   ],
   "repaired": false
  },
  "并网逆变器： 303 DSP执行的跳闸": {
   "en": "Grid Inverter: 303 DSP Execution Trip",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 303 DSP Execution Trip"
   ],
   "repaired": false
  },
  "并网逆变器： 304 D1 U相Gt 错误": {
   "en": "Grid Inverter: 304 D1 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 304 D1 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 305 D1 V相Gt 错误": {
   "en": "Grid Inverter: 305 D1 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 305 D1 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 306 D1 W相Gt 错误": {
   "en": "Grid Inverter: 306 D1 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 306 D1 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 307 D2 U相Gt 错误": {
   "en": "Grid Inverter: 307 D2 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 307 D2 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 308 D2 V相Gt 错误": {
   "en": "Grid Inverter: 308 D2 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 308 D2 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 309 D2 W相Gt 错误": {
   "en": "Grid Inverter: 309 D2 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 309 D2 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 310 D3 U相Gt 错误": {
   "en": "Grid Inverter: 310 D3 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 310 D3 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 311 D3 V相Gt 错误": {
   "en": "Grid Inverter: 311 D3 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 311 D3 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 312 D3 W相Gt 错误": {
   "en": "Grid Inverter: 312 D3 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 312 D3 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 313 D4 U相Gt 错误": {
   "en": "Grid Inverter: 313 D4 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 313 D4 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 314 D4 V相Gt 错误": {
   "en": "Grid Inverter: 314 D4 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 314 D4 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 315 D4 W相Gt 错误": {
   "en": "Grid Inverter: 315 D4 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 315 D4 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 316 D5 U相Gt 错误": {
   "en": "Grid Inverter: 316 D5 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 316 D5 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 317 D5 V相Gt 错误": {
   "en": "Grid Inverter: 317 D5 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 317 D5 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 318 D5 W相Gt 错误": {
   "en": "Grid Inverter: 318 D5 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 318 D5 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 319 D6 U相Gt 错误": {
   "en": "Grid Inverter: 319 D6 UPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 319 D6 UPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 320 D6 V相Gt 错误": {
   "en": "Grid Inverter: 320 D6 VPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 320 D6 VPhase Gt. Err."
   ],
   "repaired": false
  },
  "并网逆变器： 321 D6 W相Gt 错误": {
   "en": "Grid Inverter: 321 D6 WPhase Gt. Err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 321 D6 WPhase Gt. Err."
   ],
   "repaired": false
  },
  "ABBINU （ 80B0 ） ：信号监控": {
   "en": "ABBINU (80B0): Signal supervis",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 322 DSP没有安装": {
   "en": "Grid Inverter: 322 DSP not fitted",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GrdInv: 322 DSP not fitted"
   ],
   "repaired": false
  },
  "INU错误：失败未知": {
   "en": "INU ERR: FAIL UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 （ 4210 ）": {
   "en": "INU ERR: ACS TEMP (4210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： AI <MIN FUNC （ 8110 ）": {
   "en": "INU ERR: AI<MIN FUNC (8110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：备用错误（ FFA2 ）": {
   "en": "INU ERR: BACKUP Error (FFA2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：BC过热（ 7114 ）": {
   "en": "INU ERR: BC OVERHEAT (7114)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：BC短路 （ 7113 ）": {
   "en": "INU ERR: BC SHORT CIR (7113)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： BR 损坏 （ 7110 ）": {
   "en": "INU ERR: BR BROKEN (7110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： BR过热（ 7112 ）": {
   "en": "INU ERR: BR OVERHEAT (7112)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： BR接线（ 7111 ）": {
   "en": "INU ERR: BR WIRING (7111)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 电缆 温度 （ 4080 ）": {
   "en": "INU ERR: CABLE TEMP (4080)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： CH2 通讯 损失 （ 7520 ）": {
   "en": "INU ERR: CH2 COMM LOSS (7520)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 通讯 模块 （ 7510 ）": {
   "en": "INU ERR: COMM MODULE (7510)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： CTRLB温度 （ 4110 ）": {
   "en": "INU ERR: CTRL B TEMP (4110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：当前MEAS （ 2211 ）": {
   "en": "INU ERR: CIR CMEAS (2211)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CURR MEAS (2211)"
   ],
   "repaired": false
  },
  "INU错误： CUR UNBAL （ 2330）": {
   "en": "INU ERR: CUR UNBAL (2330)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：直流高RUSH （ FF80 ）": {
   "en": "INU ERR: DC HIGH RUSH (FF80)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 直流 过电压 （ 3210 ）": {
   "en": "INU ERR: DC OVERVOLT (3210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 直流 欠电压 （ 3220 ）": {
   "en": "INU ERR: DC UNDERVOLT (3220)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU EXT DI4 （ 1080 ）": {
   "en": "INU ERR: LSU EXT DI4 (1080)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 编码器 A < > B（ 7302 ）": {
   "en": "INU ERR: ENCODER A<>B (7302)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 编码器 错误 （ 7301 ）": {
   "en": "INU ERR: ENCODER ERR (7301)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：启动抑制 （ FF7A ）": {
   "en": "INU ERR: START INHIBI (FF7A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID 运行 失败 （ FF84 ）": {
   "en": "INU ERR: ID RUN FAIL (FF84)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： INT 配置 （ 5410 ）": {
   "en": "INU ERR: INT CONFIG (5410)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： INV禁用（ 3200 ）": {
   "en": "INU ERR: INV DISABLED (3200)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A5ED ） ：外箱尺寸线路": {
   "en": "ABBINU (A5ED): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A5EE ） ：外箱尺寸线路": {
   "en": "ABBINU (A5EE): Meas. circuit",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： IO 通讯 错误 （ 7000 ）": {
   "en": "INU ERR: IO COMM ERR (7000)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： KLIXON （ 4311 ）": {
   "en": "INU ERR: KLIXON (4311)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A6A4 ） ：电机无主值": {
   "en": "ABBINU (A6A4): Motor nomain val.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A6A4): Motor nom. val."
   ],
   "repaired": false
  },
  "INU错误： 网侧变流器故障 （ FF51 ）": {
   "en": "INU ERR: LINE Converter ERR (FF51)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: LINE CONV ERR (FF51)"
   ],
   "repaired": false
  },
  "INU错误： MOD板t （ FF88 ）": {
   "en": "INU ERR: MOD BOARD T (FF88)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： MOD 扼流环 T（ FF89 ）": {
   "en": "INU ERR: MOD CHOKE T (FF89)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电动机风扇（ 7083 ）": {
   "en": "INU ERR: MOTOR FAN (7083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电机缺相（ FF56 ）": {
   "en": "INU ERR: MOTOR PHASE (FF56)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电机堵转（ 7121 ）": {
   "en": "INU ERR: MOTOR STALL (7121)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 马达 温度 （ 4310 ）": {
   "en": "INU ERR: MOTOR TEMP (4310)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 马达 温度 M（ 4312 ）": {
   "en": "INU ERR: MOTOR TEMP M (4312)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： MPROT开关（ 4315 ）": {
   "en": "INU ERR: MPROT SWITCH (4315)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：没有电机数据（ FF52 ）": {
   "en": "INU ERR: NO MOTOR DATA (FF52)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 过频（ 7123 ）": {
   "en": "INU ERR: OVERFREQ (7123)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 仪表盘 损失 （ 5300 ）": {
   "en": "INU ERR: PANEL LOSS (5300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU 错误 ：参数CRC （ 6320 ）": {
   "en": "INU ERR: PARAM CRC (6320)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源故障（ 3381 ）": {
   "en": "INU ERR: POWER FAIL (3381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PPCC 连接 （ 5210 ）": {
   "en": "INU ERR: PPCC LINK (5210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PP过载（ 5482 ）": {
   "en": "INU ERR: PP OVERLOAD (5482)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：运行禁止（ FF54 ）": {
   "en": "INU ERR: RUN DISABLE (FF54)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：安全开关（ 7084 ）": {
   "en": "INU ERR: SAFETY SWITCH (7084)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 短路 （ 2340 ）": {
   "en": "INU ERR: SHORT CIRC (2340)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源缺相（ 3130 ）": {
   "en": "INU ERR: SUPPLY PHASE (3130)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 （ 4380 ）": {
   "en": "INU ERR: TEMP DIF (4380)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： T 测量电路（ FF91 ）": {
   "en": "INU ERR: T MEASCIRC (FF91)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: T MEAS CIRC (FF91)"
   ],
   "repaired": false
  },
  "INU错误： 欠载 （ FF6A ）": {
   "en": "INU ERR: UNDERLOAD (FF6A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 用户 大量 （ FFA1 ）": {
   "en": "INU ERR: USER MACRO (FFA1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：LSU通讯（ 7581 ）": {
   "en": "INU ERR: LSU COMM (7581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU内部（ 1083 ）": {
   "en": "INU ERR: LSU INTERNAL (1083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：重新启动（ 1086 ）": {
   "en": "INU ERR: RESTARTED (1086)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：系统启动（ 1087 ）": {
   "en": "INU ERR: SYSTEM START (1087)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 直流 BUS LIM （ 3211 ）": {
   "en": "INU ERR: DC BUS LIM (3211)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU过电流（ 2380 ）": {
   "en": "INU ERR: LSU OVERcurrent (2380)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: LSU OVERCURR (2380)"
   ],
   "repaired": false
  },
  "INU错误：LSU SC（2381）": {
   "en": "INU ERR: LSU SC (2381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：LSU主BR （ 2384 ）": {
   "en": "INU ERR: LSU MAIN BR (2384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU直流U电压 （ 3282 ）": {
   "en": "INU ERR: LSU DC UVOLT (3282)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU直流O电压 （ 3283 ）": {
   "en": "INU ERR: LSU DC OVOLT (3283)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU充电（ 3284 ）": {
   "en": "INU ERR: LSU CHARGING (3284)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88C ） ：设备清洁": {
   "en": "ABBINU (A88C): Device clean wa",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A88D ） ：直流电容": {
   "en": "ABBINU (A88D): DC capacitor wa",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU NET 电压 （ 3285 ）": {
   "en": "INU ERR: LSU NET VOLT (3285)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： INV过温（ 4290 ）": {
   "en": "INU ERR: INV OVERTEMP (4290)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU过温（ 4291 ）": {
   "en": "INU ERR: LSU OVERTEMP (4291)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU 温度 （ 4292 ）": {
   "en": "INU ERR: LSU TEMP (4292)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：模拟IO （ 5441 ）": {
   "en": "INU ERR: ANALOG IO (5441)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：数字IO （ 5442 ）": {
   "en": "INU ERR: DIGITAL IO (5442)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： INV过载（ 5481 ）": {
   "en": "INU ERR: INV OVERLOAD (5481)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 电池失败（ 5581 ）": {
   "en": "INU ERR: BATT FAILURE (5581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT AIO （ 7081 ）": {
   "en": "INU ERR: EXT AIO (7081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT DIO （ 7082 ）": {
   "en": "INU ERR: EXT DIO (7082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： I / O的SP号（ 7281 ）": {
   "en": "INU ERR: I/O SP REF (7281)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：M/F连接（ 7582 ）": {
   "en": "INU ERR: M/F CONNECT (7582)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： LSU同步RO （ 8180 ）": {
   "en": "INU ERR: LSU synchronzationHRO (8180)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: LSU SYNCHRO (8180)"
   ],
   "repaired": false
  },
  "INU错误： EM 停止（ F081 ）": {
   "en": "INU ERR: EM STOP (F081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EM 停止DEC （ F082 ）": {
   "en": "INU ERR: EM STOP DEC (F082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID 运行 （ FF35 ）": {
   "en": "INU ERR: ID RUN (FF35)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 校准RA REQ （ FF36 ）": {
   "en": "INU ERR: calibrationRA REQ (FF36)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CALIBRA REQ (FF36)"
   ],
   "repaired": false
  },
  "INU错误： 校准RA DONE （ FF37 ）": {
   "en": "INU ERR: calibrationRA DONE (FF37)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CALIBRA DONE (FF37)"
   ],
   "repaired": false
  },
  "ABBINU （ FA81 ） ：安全关断时间1": {
   "en": "ABBINU (FA81): Safe tq. off 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ FA82 ） ：安全关断时间2": {
   "en": "ABBINU (FA82): Safe tq. off 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 硬件重新配置请求 （ FF38 ）": {
   "en": "INU ERR: HW RECONF RQ (FF38)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： GD禁用（ FF53 ）": {
   "en": "INU ERR: GD DISABLED (FF53)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：非法指令（ FF5F ）": {
   "en": "INU ERR: ILLEGAL INSTRUC(FF5F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ID N 改变 （ FF68 ）": {
   "en": "INU ERR: ID N CHANGED (FF68)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 大量 变化 （ FF69 ）": {
   "en": "INU ERR: MACRO CHANGE (FF69)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：跟随FLT （ FF7E ）": {
   "en": "INU ERR: FOLLOWER FLT (FF7E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：软件C ON 抑制 （ FF7F ）": {
   "en": "INU ERR: SWC ON INHIB (FF7F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 扼流环 O温度 （ FF82 ）": {
   "en": "INU ERR: CHOKE OTEMP (FF82)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：风扇过温（ FF83 ）": {
   "en": "INU ERR: FAN OVERTEMP (FF83)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： MOT TORQ LIM （ FF85 ）": {
   "en": "INU ERR: MOT TORQ LIM (FF85)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： MOT POW LIM （ FF86 ）": {
   "en": "INU ERR: MOT POW LIM (FF86)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 同步RO速度（ FF87 ）": {
   "en": "INU ERR: synchronzationRO SPEED (FF87)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: SYNCRO SPEED (FF87)"
   ],
   "repaired": false
  },
  "INU错误： LSU DI2 OPEN（ FF96 ）": {
   "en": "INU ERR: LSU DI2 OPEN (FF96)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：LSU开始（ FF97 ）": {
   "en": "INU ERR: LSU START (FF97)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：备用中使用（ FFA3 ）": {
   "en": "INU ERR: BACKUP USED (FFA3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： POWDOWN 滤波器E（ FFA5 ）": {
   "en": "INU ERR: POWDOWN FILE (FFA5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E02 ） ：转播丢失": {
   "en": "ABBISU (3E02): Chg. relay lost",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 3E03 ）：交叉通讯": {
   "en": "ABBISU (3E03): Cross conn.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： DDF格式（ FFA6 ）": {
   "en": "INU ERR: DDF FORMAT (FFA6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：工厂文件（ FFA7 ）": {
   "en": "INU ERR: FACTORY FILE (FFA7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：错误NVOs （ FFA8 ）": {
   "en": "INU ERR: NVOS ERROR (FFA8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU 错误 ：AP PRG 错误 （ FFD6 ）": {
   "en": "INU ERR: AP PRG ERR (FFD6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 过电流 1 （ 23A0 ）": {
   "en": "INU ERR: OVERcurrentENT 1 (23A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: OVERCURRENT 1 (23A0)"
   ],
   "repaired": false
  },
  "INU错误： 过电流 2 （ 23A1 ）": {
   "en": "INU ERR: OVERcurrentENT 2 (23A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: OVERCURRENT 2 (23A1)"
   ],
   "repaired": false
  },
  "INU错误： 过电流 3 （ 23A2 ）": {
   "en": "INU ERR: OVERcurrentENT 3 (23A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: OVERCURRENT 3 (23A2)"
   ],
   "repaired": false
  },
  "INU错误： 过电流 4 （ 23±3 ）": {
   "en": "INU ERR: OVERcurrentENT 4 (23A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: OVERCURRENT 4 (23A3)"
   ],
   "repaired": false
  },
  "INU错误： 电流 UNBAL 1 （ 23E0 ）": {
   "en": "INU ERR: currentENT UNBAL 1(23E0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CURRENT UNBAL 1(23E0)"
   ],
   "repaired": false
  },
  "INU错误： 电流 UNBAL 2 （ 23E1 ）": {
   "en": "INU ERR: currentENT UNBAL 2(23E1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CURRENT UNBAL 2(23E1)"
   ],
   "repaired": false
  },
  "INU错误： 电流 UNBAL 3 （ 23E2 ）": {
   "en": "INU ERR: currentENT UNBAL 3(23E2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CURRENT UNBAL 3(23E2)"
   ],
   "repaired": false
  },
  "INU错误： 电流 UNBAL 4 （ 23E3 ）": {
   "en": "INU ERR: currentENT UNBAL 4(23E3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR: CURRENT UNBAL 4(23E3)"
   ],
   "repaired": false
  },
  "INU错误：短路 IN1U （ 23B0 ）": {
   "en": "INU ERR: SHORT CIR IN1U (23B0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN1V （ 23B1 ）": {
   "en": "INU ERR: SHORT CIR IN1V (23B1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN1W （ 23B2 ）": {
   "en": "INU ERR: SHORT CIR IN1W (23B2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN2U （ 23B3 ）": {
   "en": "INU ERR: SHORT CIR IN2U (23B3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN2V （ 23B4 ）": {
   "en": "INU ERR: SHORT CIR IN2V (23B4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN2W （ 23B5 ）": {
   "en": "INU ERR: SHORT CIR IN2W (23B5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN3U （ 23B6 ）": {
   "en": "INU ERR: SHORT CIR IN3U (23B6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN3V （ 23B7 ）": {
   "en": "INU ERR: SHORT CIR IN3V (23B7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN3W （ 23B8 ）": {
   "en": "INU ERR: SHORT CIR IN3W (23B8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN4U （ 23B9 ）": {
   "en": "INU ERR: SHORT CIR IN4U (23B9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN4V （ 23BA ）": {
   "en": "INU ERR: SHORT CIR IN4V (23BA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：短路 IN4W （ 23BB ）": {
   "en": "INU ERR: SHORT CIR IN4W (23BB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源故障IN1 （ 3382 ）": {
   "en": "INU ERR: POWER FAIL IN1 (3382)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源故障IN2 （ 3383 ）": {
   "en": "INU ERR: POWER FAIL IN2 (3383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源故障IN3 （ 3384 ）": {
   "en": "INU ERR: POWER FAIL IN3 (3384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：电源故障IN4 （ 3385 ）": {
   "en": "INU ERR: POWER FAIL IN4 (3385)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PPCC 连接 1 （ 5280 ）": {
   "en": "INU ERR: PPCC LINK 1 (5280)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PPCC 连接 2 （ 5281 ）": {
   "en": "INU ERR: PPCC LINK 2 (5281)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PPCC 连接 3 （ 5282 ）": {
   "en": "INU ERR: PPCC LINK 3 (5282)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： PPCC 连接 4 （ 5283 ）": {
   "en": "INU ERR: PPCC LINK 4 (5283)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 1U （ 42A0 ）": {
   "en": "INU ERR: ACS TEMP 1U (42A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 1V （ 42A1 ）": {
   "en": "INU ERR: ACS TEMP 1V (42A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 1W （ 42A2 ）": {
   "en": "INU ERR: ACS TEMP 1W (42A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 2U （ 42A3 ）": {
   "en": "INU ERR: ACS TEMP 2U (42A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 2V （ 42A4 ）": {
   "en": "INU ERR: ACS TEMP 2V (42A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS的温度2W （ 42A5 ）": {
   "en": "INU ERR: ACS TEMP 2W (42A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 3U （ 42A6 ）": {
   "en": "INU ERR: ACS TEMP 3U (42A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS的温度3V （ 42A7 ）": {
   "en": "INU ERR: ACS TEMP 3V (42A7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 3W （ 42A8 ）": {
   "en": "INU ERR: ACS TEMP 3W (42A8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 4U （ 42A9 ）": {
   "en": "INU ERR: ACS TEMP 4U (42A9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E06 ） ：内部更新加载": {
   "en": "ABBISU (6E06): internal rec. load",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (6E06): Int. rec. load"
   ],
   "repaired": false
  },
  "INU错误： ACS 温度 4V （ 42AA ）": {
   "en": "INU ERR: ACS TEMP 4V (42AA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： ACS 温度 4W （ 42AB ）": {
   "en": "INU ERR: ACS TEMP 4W (42AB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 1U （ 4381 ）": {
   "en": "INU ERR: TEMP DIF 1U (4381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 1V （ 4382 ）": {
   "en": "INU ERR: TEMP DIF 1V (4382)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 1W （ 4383 ）": {
   "en": "INU ERR: TEMP DIF 1W (4383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 2U （ 4384 ）": {
   "en": "INU ERR: TEMP DIF 2U (4384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 2V （ 4385 ）": {
   "en": "INU ERR: TEMP DIF 2V (4385)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 2W （ 4386 ）": {
   "en": "INU ERR: TEMP DIF 2W (4386)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 3U （ 4387 ）": {
   "en": "INU ERR: TEMP DIF 3U (4387)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 3V （ 4388 ）": {
   "en": "INU ERR: TEMP DIF 3V (4388)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 3W （ 4389 ）": {
   "en": "INU ERR: TEMP DIF 3W (4389)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 4U （ 438A ）": {
   "en": "INU ERR: TEMP DIF 4U (438A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 4V （ 438B ）": {
   "en": "INU ERR: TEMP DIF 4V (438B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 温度 偏差 4W （ 438C ）": {
   "en": "INU ERR: TEMP DIF 4W (438C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： GD禁用1 （ 54A2 ）": {
   "en": "INU ERR: GD DISABLED 1 (54A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： GD禁用2 （ 54A3 ）": {
   "en": "INU ERR: GD DISABLED 2 (54A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： GD禁用3 （ 54A4 ）": {
   "en": "INU ERR: GD DISABLED 3 (54A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： GD禁用4 （ 54A5 ）": {
   "en": "INU ERR: GD DISABLED 4 (54A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：启动抑制 1 （ 5490 ）": {
   "en": "INU ERR: START INHIB 1 (5490)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：启动抑制 2 （ 5491 ）": {
   "en": "INU ERR: START INHIB 2 (5491)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：启动抑制 3 （ 5492 ）": {
   "en": "INU ERR: START INHIB 3 (5492)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：启动抑制 4 （ 5493 ）": {
   "en": "INU ERR: START INHIB 4 (5493)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：用户L曲线（ 2312）": {
   "en": "INU ERR: USER L CURVE (2312)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：充电FLT （ 3230 ）": {
   "en": "INU ERR: CHARGING FLT (3230)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：警告未知": {
   "en": "INU WARN: WARNING UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： ACS800 温度 （ 4210 ）": {
   "en": "INU WARN: ACS800 TEMP (4210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：模拟IO （ 5441 ）": {
   "en": "INU WARN: ANALOG IO (5441)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： AI <MIN FUNC （ 8110 ）": {
   "en": "INU WARN: AI<MIN FUNC (8110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 电池失败（ 5581 ）": {
   "en": "INU WARN: BATT FAILURE (5581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： BR过热（ 7112 ）": {
   "en": "INU WARN: BR OVERHEAT (7112)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电缆 温度 （ 4080 ）": {
   "en": "INU WARN: CABLE TEMP (4080)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： CH2 通讯 损失 （ 7520 ）": {
   "en": "INU WARN: CH2 COMM LOSS (7520)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: CH2 COMM LOSS（7520）"
   ],
   "repaired": false
  },
  "INU警告： 通讯 模块 （ 7510 ）": {
   "en": "INU WARN: COMM MODULE (7510)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 直流 欠电压 （ 3220 ）": {
   "en": "INU WARN: DC UNDERVOLT (3220)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：数字IO （ 5442 ）": {
   "en": "INU WARN: DIGITAL IO (5442)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：接地故障（ 2330）": {
   "en": "INU WARN: EARTH FAULT (2330)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 编码器 A < > B（ 7302 ）": {
   "en": "INU WARN: ENCODER A<>B (7302)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 编码器 错误 （ 7301 ）": {
   "en": "INU WARN: ENCODER ERR (7301)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT模拟IO （ 7081 ）": {
   "en": "INU WARN: EXT ANALOG IO (7081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT数字IO （ 7082 ）": {
   "en": "INU WARN: EXT DIGITAL IO(7082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： INV禁用（ 3200 ）": {
   "en": "INU WARN: INV DISABLED (3200)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： MOD板t （ FF88 ）": {
   "en": "INU WARN: MOD BOARD T (FF88)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： MOD 扼流环 T（ FF89 ）": {
   "en": "INU WARN: MOD CHOKE T (FF89)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电动机风扇（ 7083 ）": {
   "en": "INU WARN: MOTOR FAN (7083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电机堵转（ 7121 ）": {
   "en": "INU WARN: MOTOR STALL (7121)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 马达 温度 （ 4310 ）": {
   "en": "INU WARN: MOTOR TEMP (4310)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 马达 温度 M（ 4312 ）": {
   "en": "INU WARN: MOTOR TEMP M (4312)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： MPROT开关（ 4315 ）": {
   "en": "INU WARN: MPROT SWITCH (4315)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 仪表盘 损失 （ 5300 ）": {
   "en": "INU WARN: PANEL LOSS (5300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： POW失败 滤波器E（ FFA0 ）": {
   "en": "INU WARN: POWFAIL FILE (FFA0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： PP过载（ 5482 ）": {
   "en": "INU WARN: PP OVERLOAD (5482)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：安全开关（ 7084 ）": {
   "en": "INU WARN: SAFETY SWITCH (7084)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：启动抑制 （ FF7A ）": {
   "en": "INU WARN: START INHIBI (FF7A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 （ 4380 ）": {
   "en": "INU WARN: TEMP DIF (4380)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： T 测量电路（ FF91 ）": {
   "en": "INU WARN: T MEASCIRC (FF91)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: T MEAS CIRC (FF91)"
   ],
   "repaired": false
  },
  "INU警告： 欠载 （ FF6A ）": {
   "en": "INU WARN: UNDERLOAD (FF6A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：系统启动（ 1087 ）": {
   "en": "INU WARN: SYSTEM START (1087)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EM 停止（ F081 ）": {
   "en": "INU WARN: EM STOP (F081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：LISU DI2 OPEN（ FF96 ）": {
   "en": "INU WARN: LISU DI2 OPEN (FF96)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：重新启动（ 1086 ）": {
   "en": "INU WARN: RESTARTED (1086)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 直流 BUS LIM （ 3211 ）": {
   "en": "INU WARN: DC BUS LIM (3211)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电源故障（ 3381 ）": {
   "en": "INU WARN: POWER FAIL (3381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：更换风扇（ 4280 ）": {
   "en": "INU WARN: REPLACE FAN (4280)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： LSU 温度 （ 4292 ）": {
   "en": "INU WARN: LSU TEMP (4292)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： INV过载（ 5481 ）": {
   "en": "INU WARN: INV OVERLOAD (5481)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：BC过热（ 7114 ）": {
   "en": "INU WARN: BC OVERHEAT (7114)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：M/F连接（ 7582 ）": {
   "en": "INU WARN: M/F CONNECT (7582)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EM 停止DEC（ F082 ）": {
   "en": "INU WARN: EM STOP DEC (F082)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE21 ） ：闪存擦除SPD": {
   "en": "ABBISU (AE21): Flash erase spd",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电机启动（ FF34 ）": {
   "en": "INU WARN: MOTOR STARTS (FF34)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： ID 运行 （ FF35 ）": {
   "en": "INU WARN: ID RUN (FF35)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 硬件重新配置请求 （ FF38 ）": {
   "en": "INU WARN: HW RECONF RQ (FF38)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：-> 电源关闭 （ FF39 ）": {
   "en": "INU WARN:--> POWEROFF (FF39)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: --> POWEROFF (FF39)"
   ],
   "repaired": false
  },
  "INU警告： ID N 改变 （ FF68 ）": {
   "en": "INU WARN: ID N CHANGED (FF68)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 大量 变化 （ FF69 ）": {
   "en": "INU WARN: MACRO CHANGE (FF69)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MACRO CHANGE(FF69)"
   ],
   "repaired": false
  },
  "INU警告：软件C开启抑制 （ FF7F ）": {
   "en": "INU WARN: SWC ON INHIB (FF7F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：风扇过温（ FF83 ）": {
   "en": "INU WARN: FAN OVERTEMP (FF83)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 同步RO速度（ FF87 ）": {
   "en": "INU WARN: synchronzationRO SPEED (FF87)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: SYNCRO SPEED (FF87)"
   ],
   "repaired": false
  },
  "INU警告：备用中使用（ FFA3 ）": {
   "en": "INU WARN: BACKUP USED (FFA3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： POWDOWN 滤波器E（ FFA5 ）": {
   "en": "INU WARN: POWDOWN FILE (FFA5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： INV过温（ 4290 ）": {
   "en": "INU WARN: INV OVERTEMP (4290)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：电源缺相（ 3188 ）": {
   "en": "INU WARN: SUPPLY PHASE (3188)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： INV禁用（ 3287 ）": {
   "en": "INU WARN: INV DISABLED (3287)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 直流 过电压 （ 3288 ）": {
   "en": "INU WARN: DC OVERVOLT  (3288)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： PPCC 连接 （ 528C ）": {
   "en": "INU WARN: PPCC LINK (528C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： PP过载（ 548D ）": {
   "en": "INU WARN: PP OVERLOAD (548D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：BC过热（ 7188 ）": {
   "en": "INU WARN: BC OVERHEAT (7188)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 过频（ 718B ）": {
   "en": "INU WARN: OVERFREQ (718B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： BR过热（ 7189 ）": {
   "en": "INU WARN: BR OVERHEAT (7189)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：运行出现故障（ FFAC ）": {
   "en": "INU WARN: RUN DISABLED (FFAC)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：跟随FLT （ FFAD ）": {
   "en": "INU WARN: FOLLOWER FLT (FFAD)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：用户L曲线（ 2386 ）": {
   "en": "INU WARN: USER L CURVE (2386)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 事件 DI5 （ 908C ）": {
   "en": "INU WARN: EXT EVNT DI5 (908C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 事件 DI7 （ 908E ）": {
   "en": "INU WARN: EXT EVNT DI7 (908E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：P LIM EXT 温度 （ 44A0 ）": {
   "en": "INU WARN: P LIM EXT TEMP(44A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：Q LIM EXT 温度 （ 44A1 ）": {
   "en": "INU WARN: Q LIM EXT TEMP(44A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：Q LIM ACS800 温度": {
   "en": "INU WARN: Q LIM ACS800 TEMP",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU 错误 ：网电压 FLT （ 3100 ）": {
   "en": "INU ERR: NET VOLT FLT (3100)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度1高（ 4491 ）": {
   "en": "INU ERR: EXT TMP1 HIGH (4491)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度2高（ 4492 ）": {
   "en": "INU ERR: EXT TMP2 HIGH (4492)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度3高（ 4493 ）": {
   "en": "INU ERR: EXT TMP3 HIGH (4493)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度4高（ 4494 ）": {
   "en": "INU ERR: EXT TMP4 HIGH (4494)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度1低（ 4495 ）": {
   "en": "INU ERR: EXT TMP1 LOW (4495)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度2低（ 4496 ）": {
   "en": "INU ERR: EXT TMP2 LOW (4496)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度3低（ 4497 ）": {
   "en": "INU ERR: EXT TMP3 LOW (4497)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXT 温度4低（ 4498 ）": {
   "en": "INU ERR: EXT TMP4 LOW (4498)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度1高（ 44A3 ）": {
   "en": "INU WARN: EXT TMP1 HIGH (44A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度2高（ 44A4 ）": {
   "en": "INU WARN: EXT TMP2 HIGH (44A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度3高（ 44A5 ）": {
   "en": "INU WARN: EXT TMP3 HIGH (44A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度4高（ 44A6 ）": {
   "en": "INU WARN: EXT TMP4 HIGH (44A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度1低（ 44A7 ）": {
   "en": "INU WARN: EXT TMP1 LOW (44A7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度2低（ 44A8 ）": {
   "en": "INU WARN: EXT TMP2 LOW (44A8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度3低（ 44A9 ）": {
   "en": "INU WARN: EXT TMP3 LOW (44A9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： EXT 温度4低（ 44AA ​​）": {
   "en": "INU WARN: EXT TMP4 LOW (44AA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 1U （ 44B1 ）": {
   "en": "INU WARN: TEMP DIF 1U (44B1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 1V （ 44B2 ）": {
   "en": "INU WARN: TEMP DIF 1V (44B2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 1W （ 44B3 ）": {
   "en": "INU WARN: TEMP DIF 1W (44B3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 2U （ 44B4 ）": {
   "en": "INU WARN: TEMP DIF 2U (44B4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 2V （ 44B5 ）": {
   "en": "INU WARN: TEMP DIF 2V (44B5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 2W （ 44B6 ）": {
   "en": "INU WARN: TEMP DIF 2W (44B6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 3U （ 44B7 ）": {
   "en": "INU WARN: TEMP DIF 3U (44B7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 3V （ 44B8 ）": {
   "en": "INU WARN: TEMP DIF 3V (44B8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 3W （ 44B9 ）": {
   "en": "INU WARN: TEMP DIF 3W (44B9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 4U （ 44BA ）": {
   "en": "INU WARN: TEMP DIF 4U (44BA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 4V （ 44BB ）": {
   "en": "INU WARN: TEMP DIF 4V (44BB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 4W （ 44BC ）": {
   "en": "INU WARN: TEMP DIF 4W (44BC)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 5U （ 44BD ）": {
   "en": "INU WARN: TEMP DIF 5U (44BD)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 5V （ 44BE ）": {
   "en": "INU WARN: TEMP DIF 5V (44BE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 温度 偏差 5W （ 44BF ）": {
   "en": "INU WARN: TEMP DIF 5W (44BF)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： AGDR 配置 （ 548B ）": {
   "en": "INU ERR: AGDR CONFIG (548B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： DI1 （ 9081 ）": {
   "en": "INU ERR: DI1 (9081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： DI1 （ 9088 ）": {
   "en": "INU WARN: DI1 (9088)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： T2溢出（ FF58 ）": {
   "en": "INU ERR: T2 OVERFLOW (FF58)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： T3溢出（ FF59 ）": {
   "en": "INU ERR: T3 OVERFLOW (FF59)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： T4溢出（ FF5A ）": {
   "en": "INU ERR: T4 OVERFLOW (FF5A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： T5溢出（ FF5B ）": {
   "en": "INU ERR: T5 OVERFLOW (FF5B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误：应用（ FF5E ）": {
   "en": "INU ERR: APPLICATION (FF5E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： RS溢出（ FF60 ）": {
   "en": "INU ERR: RS OVERFLOW (FF60)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： SS溢出（ FF61 ）": {
   "en": "INU ERR: SS OVERFLOW (FF61)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： SS下溢（ FF62 ）": {
   "en": "INU ERR: SS UNDERFLOW (FF62)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：恢复出厂（ FF69 ）": {
   "en": "INU WARN: LOAD FACTORY (FF69)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： DIMSEL （ FFA4 ）": {
   "en": "INU ERR: DIMSEL (FFA4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告：启动抑制 （ FFAE ）": {
   "en": "INU WARN: START INHIBI (FFAE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： EXC 电流 （ 2382 ）": {
   "en": "INU ERR : EXC currentENT   (2382)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : EXC CURRENT(2328)"
   ],
   "repaired": false
  },
  "INU错误：crobar（ 3286 ）": {
   "en": "INU ERR : CROWBAR       (3286)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : CROWBAR(3286)"
   ],
   "repaired": false
  },
  "INU错误： PP过载（ 548D ）": {
   "en": "INU ERR : PP OVERLOAD   (548D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : PP OVERLOAD(548D)"
   ],
   "repaired": false
  },
  "INU错误 ：快速AIO FLT （ 7085 ）": {
   "en": "INU ERR : FAST AIO FLT  (7085)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： 过频（ 718B ）": {
   "en": "INU ERR : OVERFREQ      (718B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : OVERFREQ(718B)"
   ],
   "repaired": false
  },
  "INU错误： 编码器2 （ 7381 ）": {
   "en": "INU ERR : ENCODER2      (7381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : ENCODER2(7381)"
   ],
   "repaired": false
  },
  "INU错误： 速度NOT OK （ 738B ）": {
   "en": "INU ERR : SPEED NOT OK  (738B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU错误： INU启动（ FF98 ）": {
   "en": "INU ERR : INU START     (FF98)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU ERR : INU START(FF98)"
   ],
   "repaired": false
  },
  "INU警告： 直流 欠电压 （ 3289 ）": {
   "en": "INU WARN: DC UNDERVOLT  (3289)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 马达 温度 （ 43A5 ）": {
   "en": "INU WARN: MOTOR TEMP    (43A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MOTOR TEMP(43A5)"
   ],
   "repaired": false
  },
  "INU警告： 马达 温度 M（ 43A6 ）": {
   "en": "INU WARN: MOTOR TEMP M  (43A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MOTOR TEMP M(43A6)"
   ],
   "repaired": false
  },
  "INU警告： MPROT开关（ 43A8 ）": {
   "en": "INU WARN: MPROT SWITCH  (43A8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 仪表盘 损失 （ 5381 ）": {
   "en": "INU WARN: PANEL LOSS    (5381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: PANEL LOSS(5381)"
   ],
   "repaired": false
  },
  "INU警告：安全开关 （ 7086 ）": {
   "en": "INU WARN: SAFETY SWTCH  (7086)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 过频（ 7123 ）": {
   "en": "INU WARN: OVERFREQ      (7123)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: OVERFREQ(7123)"
   ],
   "repaired": false
  },
  "INU警告： 马达 停止 （ 718A ）": {
   "en": "INU WARN: MOTOR STALL   (718A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MOTOR STALL(718A)"
   ],
   "repaired": false
  },
  "INU警告：编码器错误 （ 738C ）": {
   "en": "INU WARN: ENCODER ERR   (738C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: ENCODER ERR  (738C)"
   ],
   "repaired": false
  },
  "INU警告： 编码器 A < > B（ 738D ）": {
   "en": "INU WARN: ENCODER A<>B  (738D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 2号口通讯丢失 （ 7587 ）": {
   "en": "INU WARN: CH2 COM LOSS  (7587)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 欠载 （ FF95 ）": {
   "en": "INU WARN: UNDERLOAD     (FF95)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: UNDERLOAD(FF95)"
   ],
   "repaired": false
  },
  "INU警告： T 测量电路（ FF9F ）": {
   "en": "INU WARN: T MEASCIRC   (FF9F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: T MEAS CIRC(FF9F)"
   ],
   "repaired": false
  },
  "INU警告： ACS 800 温度 （ 4294 ）": {
   "en": "INU WARN: ACS 800 TEMP  (4294)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "INU警告： 通讯 模块 （ 7586 ）": {
   "en": "INU WARN: COMM MODULE   (7586)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: COMM MODULE（7586）"
   ],
   "repaired": false
  },
  "INU警告： MOD板t （ FF92 ）": {
   "en": "INU WARN: MOD BOARD T   (FF92)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MOD BOARD T(FF92)"
   ],
   "repaired": false
  },
  "INU警告： MOD 扼流环 T（ FF93 ）": {
   "en": "INU WARN: MOD CHOKE T   (FF93)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: MOD CHOKE T(FF93)"
   ],
   "repaired": false
  },
  "INU警告： INV过温（ 4293 ）": {
   "en": "INU WARN: INV OVERTEMP  (4293)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "INU WARN: INV OVERTEMP (4293)"
   ],
   "repaired": false
  },
  "ISU错误：失败未知": {
   "en": "ISU ERR: FAIL UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 （ 4210 ）": {
   "en": "ISU ERR: ACS TEMP (4210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： AI <MIN FUNC （ 8110 ）": {
   "en": "ISU ERR: AI<MIN FUNC (8110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：备用错误（ FFA2 ）": {
   "en": "ISU ERR: BACKUP Error (FFA2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：BC过热（ 7114 ）": {
   "en": "ISU ERR: BC OVERHEAT (7114)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：BC短路 （ 7113 ）": {
   "en": "ISU ERR: BC SHORT CIR (7113)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： BR 损坏 （ 7110 ）": {
   "en": "ISU ERR: BR BROKEN (7110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： BR过热（ 7112 ）": {
   "en": "ISU ERR: BR OVERHEAT (7112)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： BR接线（ 7111 ）": {
   "en": "ISU ERR: BR WIRING (7111)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 电缆 温度 （ 4080 ）": {
   "en": "ISU ERR: CABLE TEMP (4080)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： CH2 通讯 损失 （ 7520 ）": {
   "en": "ISU ERR: CH2 COMM LOSS (7520)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 通讯 模块 （ 7510 ）": {
   "en": "ISU ERR: COMM MODULE (7510)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： CTRLB温度 （ 4110 ）": {
   "en": "ISU ERR: CTRL B TEMP (4110)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：直流高RUSH （ FF80 ）": {
   "en": "ISU ERR: DC HIGH RUSH (FF80)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：直流过电压 （ 3210 ）": {
   "en": "ISU ERR: DC OVERVOLT (3210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：直流欠电压 （ 3220 ）": {
   "en": "ISU ERR: DC UNDERVOLT (3220)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 编码器 A < > B（ 7302 ）": {
   "en": "ISU ERR: ENCODER A<>B (7302)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 编码器 错误 （ 7301 ）": {
   "en": "ISU ERR: ENCODER ERR (7301)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 （ FF7A ）": {
   "en": "ISU ERR: START INHIBI (FF7A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID 运行 失败 （ FF84 ）": {
   "en": "ISU ERR: ID RUN FAIL (FF84)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： INT 配置 （ 5410 ）": {
   "en": "ISU ERR: INT CONFIG (5410)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： INV禁用（ 3200 ）": {
   "en": "ISU ERR: INV DISABLED (3200)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： IO 通讯 错误 （ 7000 ）": {
   "en": "ISU ERR: IO COMM ERR (7000)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： KLIXON （ 4311 ）": {
   "en": "ISU ERR: KLIXON (4311)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：网侧变流器故障 （ FF51 ）": {
   "en": "ISU ERR: LINE Converter ERR (FF51)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: LINE CONV ERR (FF51)"
   ],
   "repaired": false
  },
  "ISU错误： MOD板t （ FF88 ）": {
   "en": "ISU ERR: MOD BOARD T (FF88)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： MOD 扼流环 T（ FF89 ）": {
   "en": "ISU ERR: MOD CHOKE T (FF89)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电动机风扇（ 7083 ）": {
   "en": "ISU ERR: MOTOR FAN (7083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电机缺相（ FF56 ）": {
   "en": "ISU ERR: MOTOR PHASE (FF56)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电机堵转（ 7121 ）": {
   "en": "ISU ERR: MOTOR STALL (7121)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 马达 温度 （ 4310 ）": {
   "en": "ISU ERR: MOTOR TEMP (4310)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 马达 温度 M（ 4312 ）": {
   "en": "ISU ERR: MOTOR TEMP M (4312)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： MPROT开关（ 4315 ）": {
   "en": "ISU ERR: MPROT SWITCH (4315)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：没有电机数据（ FF52 ）": {
   "en": "ISU ERR: NO MOTOR DATA (FF52)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 过频（ 7123 ）": {
   "en": "ISU ERR: OVERFREQ (7123)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 过 软件FREQ （ FF55 ）": {
   "en": "ISU ERR: OVER SWFREQ (FF55)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 过 电流 （ 2310）": {
   "en": "ISU ERR: OVER currentENT (2310)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVER CURRENT (2310)"
   ],
   "repaired": false
  },
  "ISU错误： 仪表盘 损失 （ 5300 ）": {
   "en": "ISU ERR: PANEL LOSS (5300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：参数CRC （ 6320 ）": {
   "en": "ISU ERR: PARAM CRC (6320)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障（ 3381 ）": {
   "en": "ISU ERR: POWER FAIL (3381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 （ 5210 ）": {
   "en": "ISU ERR: PPCC LINK (5210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PP过载（ 5482 ）": {
   "en": "ISU ERR: PP OVERLOAD (5482)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：运行禁止（ FF54 ）": {
   "en": "ISU ERR: RUN DISABLE (FF54)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：安全开关（ 7084 ）": {
   "en": "ISU ERR: SAFETY SWITCH (7084)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 短路 （ 2340 ）": {
   "en": "ISU ERR: SHORT CIRC (2340)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU EXT DI5 （ 1081 ）": {
   "en": "ISU ERR: LSU EXT DI5 (1081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源缺相（ 3130 ）": {
   "en": "ISU ERR: SUPPLY PHASE (3130)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 （ 4380 ）": {
   "en": "ISU ERR: TEMP DIF (4380)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： T 测量电路（ FF91 ）": {
   "en": "ISU ERR: T MEASCIRC (FF91)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: T MEAS CIRC (FF91)"
   ],
   "repaired": false
  },
  "ISU错误： 欠载 （ FF6A ）": {
   "en": "ISU ERR: UNDERLOAD (FF6A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 用户 大量 （ FFA1 ）": {
   "en": "ISU ERR: USER MACRO (FFA1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：LSU通讯（ 7581 ）": {
   "en": "ISU ERR: LSU COMM (7581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU内部（ 1083 ）": {
   "en": "ISU ERR: LSU INTERNAL (1083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：重新启动（ 1086 ）": {
   "en": "ISU ERR: RESTARTED (1086)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：系统启动（ 1087 ）": {
   "en": "ISU ERR: SYSTEM START (1087)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU过电流（ 2380 ）": {
   "en": "ISU ERR: LSU OVERcurrent (2380)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: LSU OVERCURR (2380)"
   ],
   "repaired": false
  },
  "ISU错误：LSU SC（2381）": {
   "en": "ISU ERR: LSU SC (2381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：LSU行星轮F（ 2383）": {
   "en": "ISU ERR: LSU EARTH F (2383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：LSU主BR （ 2384 ）": {
   "en": "ISU ERR: LSU MAIN BR (2384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU直流U电压 （ 3282 ）": {
   "en": "ISU ERR: LSU DC UVOLT (3282)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU直流O电压 （ 3283 ）": {
   "en": "ISU ERR: LSU DC OVOLT (3283)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU充电（ 3284 ）": {
   "en": "ISU ERR: LSU CHARGING (3284)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： INV过温（ 4290 ）": {
   "en": "ISU ERR: INV OVERTEMP (4290)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU过温（ 4291 ）": {
   "en": "ISU ERR: LSU OVERTEMP (4291)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： LSU 温度 （ 4292 ）": {
   "en": "ISU ERR: LSU TEMP (4292)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：模拟IO （ 5441 ）": {
   "en": "ISU ERR: ANALOG IO (5441)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：数字IO （ 5442 ）": {
   "en": "ISU ERR: DIGITAL IO (5442)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： INV过载（ 5481 ）": {
   "en": "ISU ERR: INV OVERLOAD (5481)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 电池失败（ 5581 ）": {
   "en": "ISU ERR: BATT FAILURE (5581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： I / O的SP号（ 7281 ）": {
   "en": "ISU ERR: I/O SP REF (7281)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：M/F连接（ 7582 ）": {
   "en": "ISU ERR: M/F CONNECT (7582)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：马达启动（ FF34 ）": {
   "en": "ISU ERR: MOTOR STARTS (FF34)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID 运行 （ FF35 ）": {
   "en": "ISU ERR: ID RUN (FF35)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 校准RA REQ （ FF36 ）": {
   "en": "ISU ERR: calibrationRA REQ (FF36)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CALIBRA REQ (FF36)"
   ],
   "repaired": false
  },
  "ISU错误： 校准RA DONE （ FF37 ）": {
   "en": "ISU ERR: calibrationRA DONE (FF37)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CALIBRA DONE (FF37)"
   ],
   "repaired": false
  },
  "ISU错误： 硬件重新配置请求 （ FF38 ）": {
   "en": "ISU ERR: HW RECONF RQ (FF38)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：-> 电源关闭 （ FF39 ）": {
   "en": "ISU ERR:--> POWEROFF (FF39)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: --> POWEROFF (FF39)"
   ],
   "repaired": false
  },
  "ISU错误： GD禁用（ FF53 ）": {
   "en": "ISU ERR: GD DISABLED (FF53)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：非法指令（ FF5F ）": {
   "en": "ISU ERR: ILLEGAL INSTRUC(FF5F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ID N 改变 （ FF68 ）": {
   "en": "ISU ERR: ID N CHANGED (FF68)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 大量 变化 （ FF69 ）": {
   "en": "ISU ERR: MACRO CHANGE (FF69)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：跟随FLT （ FF7E ）": {
   "en": "ISU ERR: FOLLOWER FLT (FF7E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：软件C开启抑制 （ FF7F ）": {
   "en": "ISU ERR: SWC ON INHIB (FF7F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：在扼流环 温度 （ FF81 ）": {
   "en": "ISU ERR: IN CHOKE TEMP (FF81)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 扼流环 O温度 （ FF82 ）": {
   "en": "ISU ERR: CHOKE OTEMP (FF82)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：风扇过温（ FF83 ）": {
   "en": "ISU ERR: FAN OVERTEMP (FF83)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 同步RO速度（ FF87 ）": {
   "en": "ISU ERR: synchronzationRO SPEED (FF87)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: SYNCRO SPEED (FF87)"
   ],
   "repaired": false
  },
  "ISU错误： LSU DI2 OPEN（ FF96 ）": {
   "en": "ISU ERR: LSU DI2 OPEN (FF96)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：LSU开始（ FF97 ）": {
   "en": "ISU ERR: LSU START (FF97)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源文件（ FFA0 ）": {
   "en": "ISU ERR: POWFAIL FILE (FFA0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：使用备份（ FFA3 ）": {
   "en": "ISU ERR: BACKUP USED (FFA3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源关闭文件（ FFA5 ）": {
   "en": "ISU ERR: POWDOWN FILE (FFA5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： DDF格式（ FFA6 ）": {
   "en": "ISU ERR: DDF FORMAT (FFA6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：工厂文件（ FFA7 ）": {
   "en": "ISU ERR: FACTORY FILE (FFA7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：NVOs 错误（ FFA8 ）": {
   "en": "ISU ERR: NVOS ERROR (FFA8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：APPRG 错误 （ FFD6 ）": {
   "en": "ISU ERR: AP PRG ERR (FFD6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 过电流 1 （ 23A0 ）": {
   "en": "ISU ERR: OVERcurrentENT 1 (23A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVERCURRENT 1 (23A0)"
   ],
   "repaired": false
  },
  "ISU错误： 过电流 2 （ 23A1 ）": {
   "en": "ISU ERR: OVERcurrentENT 2 (23A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVERCURRENT 2 (23A1)"
   ],
   "repaired": false
  },
  "ISU错误： 过电流 3 （ 23A2 ）": {
   "en": "ISU ERR: OVERcurrentENT 3 (23A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVERCURRENT 3 (23A2)"
   ],
   "repaired": false
  },
  "ISU错误： 过电流 4 （ 23±3 ）": {
   "en": "ISU ERR: OVERcurrentENT 4 (23A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVERCURRENT 4 (23A3)"
   ],
   "repaired": false
  },
  "ISU错误： 过电流 5 （ 23A4 ）": {
   "en": "ISU ERR: OVERcurrentENT 5 (23A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: OVERCURRENT 5 (23A4)"
   ],
   "repaired": false
  },
  "ISU错误： 电流 UNBAL 1 （ 23E0 ）": {
   "en": "ISU ERR: currentENT UNBAL 1(23E0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURRENT UNBAL 1(23E0)"
   ],
   "repaired": false
  },
  "ISU错误： 电流 UNBAL 2 （ 23E1 ）": {
   "en": "ISU ERR: currentENT UNBAL 2(23E1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURRENT UNBAL 2(23E1)"
   ],
   "repaired": false
  },
  "ISU错误： 电流 UNBAL 3 （ 23E2 ）": {
   "en": "ISU ERR: currentENT UNBAL 3(23E2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURRENT UNBAL 3(23E2)"
   ],
   "repaired": false
  },
  "ISU错误： 电流 UNBAL 4 （ 23E3 ）": {
   "en": "ISU ERR: currentENT UNBAL 4(23E3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURRENT UNBAL 4(23E3)"
   ],
   "repaired": false
  },
  "ISU错误： 电流 UNBAL 5 （ 23E4 ）": {
   "en": "ISU ERR: currentENT UNBAL 5(23E4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU ERR: CURRENT UNBAL 5(23E4)"
   ],
   "repaired": false
  },
  "ISU错误：短路 IN1U （ 23B0 ）": {
   "en": "ISU ERR: SHORT CIR IN1U (23B0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN1V （ 23B1 ）": {
   "en": "ISU ERR: SHORT CIR IN1V (23B1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN1W （ 23B2 ）": {
   "en": "ISU ERR: SHORT CIR IN1W (23B2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN2U （ 23B3 ）": {
   "en": "ISU ERR: SHORT CIR IN2U (23B3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN2V （ 23B4 ）": {
   "en": "ISU ERR: SHORT CIR IN2V (23B4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN2W （ 23B5 ）": {
   "en": "ISU ERR: SHORT CIR IN2W (23B5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN3U （ 23B6 ）": {
   "en": "ISU ERR: SHORT CIR IN3U (23B6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN3V （ 23B7 ）": {
   "en": "ISU ERR: SHORT CIR IN3V (23B7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN3W （ 23B8 ）": {
   "en": "ISU ERR: SHORT CIR IN3W (23B8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN4U （ 23B9 ）": {
   "en": "ISU ERR: SHORT CIR IN4U (23B9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN4V （ 23BA ）": {
   "en": "ISU ERR: SHORT CIR IN4V (23BA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN4W （ 23BB ）": {
   "en": "ISU ERR: SHORT CIR IN4W (23BB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN5U （ 23BC ）": {
   "en": "ISU ERR: SHORT CIR IN5U (23BC)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN5V （ 23BD ）": {
   "en": "ISU ERR: SHORT CIR IN5V (23BD)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：短路 IN5W （ 23BE ）": {
   "en": "ISU ERR: SHORT CIR IN5W (23BE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障IN1 （ 3382 ）": {
   "en": "ISU ERR: POWER FAIL IN1 (3382)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障IN2 （ 3383 ）": {
   "en": "ISU ERR: POWER FAIL IN2 (3383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障IN3 （ 3384 ）": {
   "en": "ISU ERR: POWER FAIL IN3 (3384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障IN4 （ 3385 ）": {
   "en": "ISU ERR: POWER FAIL IN4 (3385)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：电源故障IN5 （ 3386 ）": {
   "en": "ISU ERR: POWER FAIL IN5 (3386)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 1 （ 5280 ）": {
   "en": "ISU ERR: PPCC LINK 1 (5280)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 2 （ 5281 ）": {
   "en": "ISU ERR: PPCC LINK 2 (5281)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 3 （ 5282 ）": {
   "en": "ISU ERR: PPCC LINK 3 (5282)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 4 （ 5283 ）": {
   "en": "ISU ERR: PPCC LINK 4 (5283)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： PPCC 连接 5 （ 5284 ）": {
   "en": "ISU ERR: PPCC LINK 5 (5284)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "GPS同步ronisation错误": {
   "en": "GPS synchronzationhronisation error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "GPS synchronisation error"
   ],
   "repaired": false
  },
  "ISU错误： ACS 温度 1U （ 42A0 ）": {
   "en": "ISU ERR: ACS TEMP 1U (42A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 1V （ 42A1 ）": {
   "en": "ISU ERR: ACS TEMP 1V (42A1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 1W （ 42A2 ）": {
   "en": "ISU ERR: ACS TEMP 1W (42A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 2U （ 42A3 ）": {
   "en": "ISU ERR: ACS TEMP 2U (42A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 2V （ 42A4 ）": {
   "en": "ISU ERR: ACS TEMP 2V (42A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS的温度2W （ 42A5 ）": {
   "en": "ISU ERR: ACS TEMP 2W (42A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 3U （ 42A6 ）": {
   "en": "ISU ERR: ACS TEMP 3U (42A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS的温度3V （ 42A7 ）": {
   "en": "ISU ERR: ACS TEMP 3V (42A7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 3W （ 42A8 ）": {
   "en": "ISU ERR: ACS TEMP 3W (42A8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 4U （ 42A9 ）": {
   "en": "ISU ERR: ACS TEMP 4U (42A9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 4V （ 42AA ）": {
   "en": "ISU ERR: ACS TEMP 4V (42AA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 4W （ 42AB ）": {
   "en": "ISU ERR: ACS TEMP 4W (42AB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 5U （ 42AC ）": {
   "en": "ISU ERR: ACS TEMP 5U (42AC)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 5V （ 42AD ）": {
   "en": "ISU ERR: ACS TEMP 5V (42AD)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： ACS 温度 5W （ 42AE ）": {
   "en": "ISU ERR: ACS TEMP 5W (42AE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 1U （ 4381 ）": {
   "en": "ISU ERR: TEMP DIF 1U (4381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 1V （ 4382 ）": {
   "en": "ISU ERR: TEMP DIF 1V (4382)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 1W （ 4383 ）": {
   "en": "ISU ERR: TEMP DIF 1W (4383)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 2U （ 4384 ）": {
   "en": "ISU ERR: TEMP DIF 2U (4384)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 2V （ 4385 ）": {
   "en": "ISU ERR: TEMP DIF 2V (4385)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 2W （ 4386 ）": {
   "en": "ISU ERR: TEMP DIF 2W (4386)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 3U （ 4387 ）": {
   "en": "ISU ERR: TEMP DIF 3U (4387)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 3V （ 4388 ）": {
   "en": "ISU ERR: TEMP DIF 3V (4388)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 3W （ 4389 ）": {
   "en": "ISU ERR: TEMP DIF 3W (4389)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 4U （ 438A ）": {
   "en": "ISU ERR: TEMP DIF 4U (438A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 4V （ 438B ）": {
   "en": "ISU ERR: TEMP DIF 4V (438B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 4W （ 438C ）": {
   "en": "ISU ERR: TEMP DIF 4W (438C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 5U （ 438D ）": {
   "en": "ISU ERR: TEMP DIF 5U (438D)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 5V （ 438E ）": {
   "en": "ISU ERR: TEMP DIF 5V (438E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： 温度 偏差 5W （ 438F ）": {
   "en": "ISU ERR: TEMP DIF 5W (438F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： GD禁用1 （ 54A2 ）": {
   "en": "ISU ERR: GD DISABLED 1 (54A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： GD禁用2 （ 54A3 ）": {
   "en": "ISU ERR: GD DISABLED 2 (54A3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： GD禁用3 （ 54A4 ）": {
   "en": "ISU ERR: GD DISABLED 3 (54A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： GD禁用4 （ 54A5 ）": {
   "en": "ISU ERR: GD DISABLED 4 (54A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： GD禁用5 （ 54A6 ）": {
   "en": "ISU ERR: GD DISABLED 5 (54A6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 1 （ 5490 ）": {
   "en": "ISU ERR: START INHIB 1 (5490)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 2 （ 5491 ）": {
   "en": "ISU ERR: START INHIB 2 (5491)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 3 （ 5492 ）": {
   "en": "ISU ERR: START INHIB 3 (5492)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 4 （ 5493 ）": {
   "en": "ISU ERR: START INHIB 4 (5493)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：启动抑制 5 （ 5494 ）": {
   "en": "ISU ERR: START INHIB 5 (5494)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：用户L曲线（ 2312 ）": {
   "en": "ISU ERR: USER L CURVE (2312)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：充电FLT （ 3230 ）": {
   "en": "ISU ERR: CHARGING FLT (3230)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：网电压 FLT （ 32A2 ）": {
   "en": "ISU ERR: NET VOLT FLT (32A2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：高UAC的峰值（体32a4 ）": {
   "en": "ISU ERR: HIGH UAC PEAK(32A4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：高UAC列弗（ 32A5 ）": {
   "en": "ISU ERR: HIGH UAC LEV (32A5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告：警告未知": {
   "en": "ISU WARN: WARNING UNKNOWN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： ACS800 温度 （ 4210 ）": {
   "en": "ISU WARN: ACS800 TEMP (4210)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 通讯 模块 （ 7510 ）": {
   "en": "ISU WARN: COMM MODULE (7510)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：接地故障（ 2330）": {
   "en": "ISU WARN: EARTH FAULT (2330)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： INV过温（ 4290 ）": {
   "en": "ISU WARN: INV OVERTEMP (4290)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： MOD板t （ FF88 ）": {
   "en": "ISU WARN: MOD BOARD T (FF88)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： MOD 扼流环 T（ FF89 ）": {
   "en": "ISU WARN: MOD CHOKE T (FF89)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 仪表盘 损失 （ 5300 ）": {
   "en": "ISU WARN: PANEL LOSS (5300)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： T 测量电路（ FF91 ）": {
   "en": "ISU WARN: T MEASCIRC (FF91)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU WARN: T MEAS CIRC (FF91)"
   ],
   "repaired": false
  },
  "ISU警告 ： A级，风扇不转动": {
   "en": "ISU WARN: DI1,fan not rotating",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT EVENT DI5": {
   "en": "ISU WARN: EXT EVENT DI5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT EVENT DI7": {
   "en": "ISU WARN: EXT EVENT DI7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度 1": {
   "en": "ISU WARN: EXT TMP 1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度 2": {
   "en": "ISU WARN: EXT TMP 2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度 3": {
   "en": "ISU WARN: EXT TMP 3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： EXT 温度 4": {
   "en": "ISU WARN: EXT TMP 4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 净损失": {
   "en": "ISU WARN: NET LOST",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV1": {
   "en": "ISU WARN: TEMPD INV1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV2": {
   "en": "ISU WARN: TEMPD INV2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV3": {
   "en": "ISU WARN: TEMPD INV3",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV4": {
   "en": "ISU WARN: TEMPD INV4",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV5": {
   "en": "ISU WARN: TEMPD INV5",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV6": {
   "en": "ISU WARN: TEMPD INV6",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV7": {
   "en": "ISU WARN: TEMPD INV7",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV8": {
   "en": "ISU WARN: TEMPD INV8",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV9": {
   "en": "ISU WARN: TEMPD INV9",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV10": {
   "en": "ISU WARN: TEMPD INV10",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV11": {
   "en": "ISU WARN: TEMPD INV11",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D INV12": {
   "en": "ISU WARN: TEMPD INV12",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D U相": {
   "en": "ISU WARN: TEMPD PHASE U",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D V相": {
   "en": "ISU WARN: TEMPD PHASE V",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度D W相": {
   "en": "ISU WARN: TEMPD PHASE W",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 电池失败（ 5581 ）": {
   "en": "ISU WARN: BATT FAILURE (5581)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：直流欠电压 （ 3289 ）": {
   "en": "ISU WARN: DC UNDERVOLT (3289)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：电源缺相（ 3188 ）": {
   "en": "ISU WARN: SUPPLY PHASE (3188)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：直流过电压 （ 3288 ）": {
   "en": "ISU WARN: DC OVERVOLT  (3288)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： PPCC 连接 （ 528C ）": {
   "en": "ISU WARN: PPCC LINK (528C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：用户L曲线（ 2386 ）": {
   "en": "ISU WARN: USER L CURVE (2386)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： ACS800 温度 （ 4294 ）": {
   "en": "ISU WARN: ACS800 TEMP (4294)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 通讯 模块 （ 7586 ）": {
   "en": "ISU WARN: COMM MODULE (7586)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：接地故障（ 2387）": {
   "en": "ISU WARN: EARTH FAULT (2387)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： INV过温（ 4293 ）": {
   "en": "ISU WARN: INV OVERTEMP (4293)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 仪表盘 损失 （ 5381 ）": {
   "en": "ISU WARN: PANEL LOSS (5381)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： T 测量电路（ FF9F ）": {
   "en": "ISU WARN: T MEASCIRC (FF9F)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU WARN: T MEAS CIRC (FF9F)"
   ],
   "repaired": false
  },
  "ISU警告 ：电动机风扇（ 7083 ）": {
   "en": "ISU WARN: MOTOR FAN (7083)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：RT净资产负债管理（ 32A0 ）": {
   "en": "ISU WARN: RT NET ALM (32A0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 硬件重新配置请求 （ FF38 ）": {
   "en": "ISU WARN: HW RECONF RQ (FF38)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告：-> 电源关闭 （ FF39 ）": {
   "en": "ISU WARN:--> POWEROFF (FF39)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ISU WARN: --> POWEROFF (FF39)"
   ],
   "repaired": false
  },
  "ISU警告 ： ID N 改变 （ FF68 ）": {
   "en": "ISU WARN: ID N CHANGED (FF68)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：AP PRG 错误 （ FFD6 ）": {
   "en": "ISU WARN: AP PRG ERR (FFD6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误 ：网电压 FLT （ 3100 ）": {
   "en": "ISU ERR: NET VOLT FLT (3100)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ：更换风扇（ 4280 ）": {
   "en": "ISU WARN: REPLACE FAN (4280)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 1U （ 44B1 ）": {
   "en": "ISU WARN: TEMP DIF 1U (44B1)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 1V （ 44B2 ）": {
   "en": "ISU WARN: TEMP DIF 1V (44B2)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 1W （ 44B3 ）": {
   "en": "ISU WARN: TEMP DIF 1W (44B3)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 2U （ 44B4 ）": {
   "en": "ISU WARN: TEMP DIF 2U (44B4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 2V （ 44B5 ）": {
   "en": "ISU WARN: TEMP DIF 2V (44B5)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 2W （ 44B6 ）": {
   "en": "ISU WARN: TEMP DIF 2W (44B6)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 3U （ 44B7 ）": {
   "en": "ISU WARN: TEMP DIF 3U (44B7)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 3V （ 44B8 ）": {
   "en": "ISU WARN: TEMP DIF 3V (44B8)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 3W （ 44B9 ）": {
   "en": "ISU WARN: TEMP DIF 3W (44B9)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 4U （ 44BA ）": {
   "en": "ISU WARN: TEMP DIF 4U (44BA)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 4V （ 44BB ）": {
   "en": "ISU WARN: TEMP DIF 4V (44BB)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 4W （ 44BC ）": {
   "en": "ISU WARN: TEMP DIF 4W (44BC)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 5U （ 44BD ）": {
   "en": "ISU WARN: TEMP DIF 5U (44BD)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 5V （ 44BE ）": {
   "en": "ISU WARN: TEMP DIF 5V (44BE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： 温度 偏差 5W （ 44BF ）": {
   "en": "ISU WARN: TEMP DIF 5W (44BF)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： DI1 （ 9081 ）": {
   "en": "ISU ERR: DI1 (9081)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： DI1 （ 9088 ）": {
   "en": "ISU WARN: DI1 (9088)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：一次侧CNT FLT （ FF17 ）": {
   "en": "ISU ERR: MAIN CNT FLT (FF17)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： T2溢出（ FF58 ）": {
   "en": "ISU ERR: T2 OVERFLOW (FF58)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： T3溢出（ FF59 ）": {
   "en": "ISU ERR: T3 OVERFLOW (FF59)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： T4溢出（ FF5A ）": {
   "en": "ISU ERR: T4 OVERFLOW (FF5A)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： T5溢出（ FF5B ）": {
   "en": "ISU ERR: T5 OVERFLOW (FF5B)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：状态过F （ FF5C ）": {
   "en": "ISU ERR: STATE OVERF (FF5C)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误：应用（ FF5E ）": {
   "en": "ISU ERR: APPLICATION (FF5E)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： RS溢出（ FF60 ）": {
   "en": "ISU ERR: RS OVERFLOW (FF60)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： SS溢出（ FF61 ）": {
   "en": "ISU ERR: SS OVERFLOW (FF61)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： SS下溢（ FF62 ）": {
   "en": "ISU ERR: SS UNDERFLOW (FF62)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告：恢复出厂（ FF69 ）": {
   "en": "ISU WARN: LOAD FACTORY (FF69)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告 ： POW失败 滤波器E（ FFA0 ）": {
   "en": "ISU WARN: POWFAIL FILE (FFA0)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU错误： DIMSEL （ FFA4 ）": {
   "en": "ISU ERR: DIMSEL (FFA4)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ISU警告：启动抑制 （ FFAE ）": {
   "en": "ISU WARN: START INHIBI (FFAE)",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7380 ） ：编码器初始化失败": {
   "en": "ABBINU (7380): Encoder intfail",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ 7582 ） ：MF通讯丢失": {
   "en": "ABBINU (7582): MF comm loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBINU （ A6E5 ） ：AI主参数": {
   "en": "ABBINU (A6E5): AI paramain",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBINU (A6E5): AI param."
   ],
   "repaired": false
  },
  "ABBINU （ AFEA ） ：启动使能信号": {
   "en": "ABBINU (AFEA): Enable start si",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E01 ） ：接地漏电": {
   "en": "ABBISU (2E01): Earth leakage",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 2E07 ） ：BU通讯": {
   "en": "ABBISU (2E07): BU commutation",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 32C6 ） ：LSU接地改变": {
   "en": "ABBISU (32C6): LSU chg earth",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E15 ） ：文本数据溢出": {
   "en": "ABBISU (6E15): Text data overf",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E16 ） ：文本32位TBL": {
   "en": "ABBISU (6E16): Text 32-bit tbl",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 6E17 ） ：文本64位TBL": {
   "en": "ABBISU (6E17): Text 64-bit tbl",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "D润滑油轴承高油底壳": {
   "en": "D lubrication Oil high bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil high bearing sump"
   ],
   "repaired": false
  },
  "D润滑油轴承低油底壳": {
   "en": "D lubrication Oil low bearing sump",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil low bearing sump"
   ],
   "repaired": false
  },
  "D润滑轴油承低油底壳错误": {
   "en": "D lubrication Oil low bearing sump err.",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "D Lub. Oil low bear. sump err."
   ],
   "repaired": false
  },
  "ABBISU （ 6E18 ） ：文本文件溢出": {
   "en": "ABBISU (6E18): Text file overf",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7E0D ） ： FA2FA DDCS通讯": {
   "en": "ABBISU (7E0D): FA2FA DDCS Com",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 7E0F ） ： FSO_发电机故障": {
   "en": "ABBISU (7E0F): FSO_FAULTS_GEN",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 9E00 ） ：外部故障": {
   "en": "ABBISU (9E00): External fault",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 9E01 ）：外部故障1": {
   "en": "ABBISU (9E01): External fault1",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ 9E02 ）：外部故障2": {
   "en": "ABBISU (9E02): External fault2",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE25 ） ： FBA参数A": {
   "en": "ABBISU (AE25): FBA A parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE26 ） ： FBA参数B": {
   "en": "ABBISU (AE26): FBA B parameter",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE27 ） ：AI主参数": {
   "en": "ABBISU (AE27): AI paramain",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE27): AI param."
   ],
   "repaired": false
  },
  "ABBISU （ AE30 ） ： FBA 通信A": {
   "en": "ABBISU (AE30): FBA A Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE30): FBA A comm."
   ],
   "repaired": false
  },
  "ABBISU （ AE31 ） ： FBA 通信B": {
   "en": "ABBISU (AE31): FBA B Communication",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [
    "ABBISU (AE31): FBA B comm."
   ],
   "repaired": false
  },
  "ABBISU （ AE32 ） ： EFB通讯丢失": {
   "en": "ABBISU (AE32): EFB comm loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE3E ） ：面板损耗": {
   "en": "ABBISU (AE3E): Panel loss",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE56 ） ： FA2FA DDCS通讯": {
   "en": "ABBISU (AE56): FA2FA DDCS Com",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ AE5D ） ：识别运行": {
   "en": "ABBISU (AE5D): Ident. run",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "ABBISU （ FF61 ） ：ID没有验证运行": {
   "en": "ABBISU (FF61): ID run not comp",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "TLC G传感器冗余错误": {
   "en": "TLC GSensor redundancy error",
   "source": "luneng_dongtai_bilingual:Sheet1",
   "variants": [],
   "repaired": false
  },
  "中文名称": {
   "en": "English",
   "source": "luneng_dongtai_bilingual:Sheet2",
   "variants": [],
   "repaired": false
  },
  "Ireg.模块错误": {
   "en": "Ireg.Module Error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "过安装进程标记": {
   "en": "Too many InstallTickProcess",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "平均值最大编号": {
   "en": "Max no. of mean values",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "平均值未安装": {
   "en": "Averaging not installed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "温度平均值最大编号": {
   "en": "Max no. of temp. meanvalues",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "未设置错误": {
   "en": "Error not installed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "未设置参数": {
   "en": "Parameter not installed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "服务模式下输入": {
   "en": "Input Service",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "制动器定义故障": {
   "en": "Brake definition error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "软件错误": {
   "en": "Software error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "防火墙软件错误": {
   "en": "Software WatchDog tripped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "防火墙硬件错误": {
   "en": "Hardware WatchDog tripped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "安全链触发急停": {
   "en": "Safety related stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "手动急停": {
   "en": "Manual stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "外部急停": {
   "en": "External stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "机舱应急接点，错误": {
   "en": "Nacelle emergency contact. err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏航限位传感器激活": {
   "en": "Yaw limit sensor activated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "本地空转停机": {
   "en": "Manual idle stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "远程主系统停机": {
   "en": "Remote stop M-system",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "远程维护停机": {
   "en": "Remote stop Service",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "风机在本地操作": {
   "en": "Turbine in local operation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "手动急停-偏航": {
   "en": "Manual stop - yawing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "远程急停-电网操作": {
   "en": "Remote stop - Grid operator",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "备用电源停止-没有偏航": {
   "en": "Backup power stop - No yawing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "手动停机-本地-不空转": {
   "en": "Manual stop - Local - No idle",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "刹车停机": {
   "en": "Stopped with brake",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "服务停机 液压/齿轮泵/风扇": {
   "en": "Service Stop Hyd/Gear Pump/Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "1035未使用": {
   "en": "1035 Not used",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "1036未使用": {
   "en": "1036 Not used",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "1037未使用": {
   "en": "1037 Not used",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "塔筒振动TOR": {
   "en": "DG: Tower vent. TOR",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "塔筒振动TOR-停机": {
   "en": "Tower vent. TOR - Stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "3P轴向高速振动，等待": {
   "en": "High 3P side-side vib, waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "3P轴向高速振动，停机": {
   "en": "High 3P side-side vib, stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "PU振动，停机": {
   "en": "PU vibration, stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子不平衡-温度低": {
   "en": "Rotor imbalance - Low temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子不平衡": {
   "en": "Rotor imbalance",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "风速不足以切入": {
   "en": "Insufficient Wind for cut-in",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "TOR机舱风扇": {
   "en": "Nacelle fan TOR",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "限功率，西门子": {
   "en": "DG:Local power limit, Siemens",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "TOR发电机冷却风扇A1&A2": {
   "en": "TOR Generator cool Fans A1&A2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "TOR发电机冷却风扇B1&B2": {
   "en": "TOR Generator cool Fans B1&B2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机冷却 1-液体温度错误": {
   "en": "Gen.Cool 1 - Liquid Temp Error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "TOR外部发电机风扇": {
   "en": "TOR external generator fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机过热无风扇": {
   "en": "Generator overheated no fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "不同高温 绕组磁体": {
   "en": "High Temp diff. winding-magnet",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "超速测试 激活": {
   "en": "OverSpeedTest Active",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机超速 等待": {
   "en": "Generator overspeed Waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子超速 等待": {
   "en": "Rotor overspeed Waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机超速 停机": {
   "en": "Generator overspeed stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子超速 停机": {
   "en": "Rotor overspeed stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机振动过速，设计限制": {
   "en": "Osc. in gen. speed, design lim",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机振动过速，结果限制": {
   "en": "Osc. in gen. speed, cons. lim",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "轮毂检查过程中电磁阀错误": {
   "en": "Valve failures during HubCheck",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "阀103/120故障，叶片锁住": {
   "en": "Valv103/120 Err. Blade Blocked",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "轮毂传感器检查失败": {
   "en": "Failed Hub sensor check",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "液压监控：液压油压力高": {
   "en": "HydPrsMon: HydPress high",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "液压监控：轮毂压力高": {
   "en": "HydPrsMon: HubPresX high",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片A蓄能器1帽故障": {
   "en": "Accumulator 1 cap Err bld:A",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片A蓄能器2帽故障": {
   "en": "Accumulator 2 cap Err bld:A",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片B蓄能器1帽故障": {
   "en": "Accumulator 1 cap Err bld:B",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片B蓄能器2帽故障": {
   "en": "Accumulator 2 cap Err bld:B",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片C蓄能器1帽故障": {
   "en": "Accumulator 1 cap Err bld:C",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片C蓄能器2帽故障": {
   "en": "Accumulator 2 cap Err bld:C",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "轮毂部件松动": {
   "en": "Loose Object Detected in Hub",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Loose Object in hub"
   ],
   "repaired": false
  },
  "DLO能量过剩": {
   "en": "Energy in DLO event exceeded",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "泵静止时油压高": {
   "en": "High oil pressure, pump stat.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "电滑环故障": {
   "en": "Slip ring error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "很多电滑环故障": {
   "en": "Too many slip ring errors",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机轴承：压力传感器故障": {
   "en": "Gen Bearing:PressureSensError",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机轴承：压力高": {
   "en": "Gen Bearing:HighPressure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机轴承：油脂多": {
   "en": "Gen Bearing:GreaseLevelHigh",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "在线进口压力传感器错误": {
   "en": "Inline (bef) press. sens.error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "在线出口压力传感器错误": {
   "en": "Inline (aft) press. sens.error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机转速/SRSG速度故障": {
   "en": "GenRpm/SRSG speed error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "速度传感器配置故障": {
   "en": "Speed sensor config error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SRSG版本冲突": {
   "en": "SRSG Version conflict",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SRSG速度超出频率等级": {
   "en": "SRSG speed outside freq. range",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片载荷传感器校准故障": {
   "en": "Blade load sensor calib. miss.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SSVG检测到振动": {
   "en": "SSVG detected vibration/shock",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SSVG版本冲突": {
   "en": "SSVG version conflict",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SSVG错误": {
   "en": "SSVG faulty",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机转速持续停止增加": {
   "en": "GenRpm spike duration exceeded",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "RSA窗口冲突": {
   "en": "RSA window conflict",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "RSA SP边缘冲突": {
   "en": "RSA SP margin conflict",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "本地限速 西门子": {
   "en": "DG:Local speed limit, Siemens",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SUM：检测到分层": {
   "en": "SUM: Delamination detected",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SUM：传感器故障": {
   "en": "SUM: Sensor error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SUM：模块故障": {
   "en": "SUM: Module error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨系统无法增加压力": {
   "en": "PitchSys Unable To BuildUpPres",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "液压油温故障，泵停机": {
   "en": "HydOil TempError Pump stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片A油压低": {
   "en": "SafPitcAcc:Low Oil Press Bld A",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片B油压低": {
   "en": "SafPitcAcc:Low Oil Press Bld B",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片C油压低": {
   "en": "SafPitcAcc:Low Oil Press Bld C",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片A氮气压力低": {
   "en": "SafPitcAcc:Low Nit Press Bld A",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片B氮气压力低": {
   "en": "SafPitcAcc:Low Nit Press Bld B",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片C氮气压力低": {
   "en": "SafPitcAcc:Low Nit Press Bld C",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片A压力增加": {
   "en": "SafPitcAcc:Press Buildup Bld A",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片B压力增加": {
   "en": "SafPitcAcc:Press Buildup Bld B",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器：叶片C压力增加": {
   "en": "SafPitcAcc:Press Buildup Bld C",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "液压监控：偏航泵压力高": {
   "en": "HydPrsMon: YawPmPrs high",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "低扭矩转子二次风能": {
   "en": "Low torque rotor. Sec. WSpeed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "低扭矩辅助风能​​温暖": {
   "en": "Low torque Sec. WSpeed warm",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies1超声波风速仪故障": {
   "en": "Thies1 SonicWindSensor error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies2超声波风速仪故障": {
   "en": "Thies2 SonicWindSensor error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies1超声波风速仪通讯故障": {
   "en": "Thies1 SonicWindSensor CommErr",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies2超声波风速仪通讯故障": {
   "en": "Thies2 SonicWindSensor CommErr",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies1配置故障": {
   "en": "Thies1 Configuration error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "Thies2配置故障": {
   "en": "Thies2 Configuration error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "沙尘暴环境停机": {
   "en": "Stop for Sandstorm condition",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "风等级停机": {
   "en": "Stop for WindRange (WIRS)",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：停机": {
   "en": "Ice Detect: Stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：停机，检测到结冰": {
   "en": "Ice Detect: Stopped, De-Ice",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：标准操作": {
   "en": "Ice Detect: Std. Operation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：适应操作": {
   "en": "Ice Detect: Adapt Operation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：适应操作，检测到结冰": {
   "en": "Ice Detect: Adapt Oper, De-Ice",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "功率曲线低，没有结冰": {
   "en": "Low Power Curve, No Ice",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰检测：大风停机": {
   "en": "Ice Detect: Stopped WindHigh",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "结冰操作，变桨控制参数故障": {
   "en": "OpWthIce Pitch Ctrl. Param Err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "环境温度升高": {
   "en": "Amb. temp. extended operation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "环境温度低，可用": {
   "en": "Ambient low temp. availability",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "环境温度高，可用": {
   "en": "Ambient high temp.availability",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "噪音低，设定值超时": {
   "en": "DG: LowNoise setpoint timeout",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机：风速切出，最大风": {
   "en": "GEN: Blw Cut-out spd, Max Wnd",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "超声波非法补偿值": {
   "en": "Sonic FT illegal OffsetValues",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰电阻丝C错误": {
   "en": "Blade de-icing res. C err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰校正A损坏": {
   "en": "Blade de-icing calibrat. A BAD",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰校正B损坏": {
   "en": "Blade de-icing calibrat. B BAD",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰校正C损坏": {
   "en": "Blade de-icing calibrat. C BAD",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰现在错误": {
   "en": "Blade de-icing faulty current",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "叶片除冰主刹车断开": {
   "en": "Blade de-icing main brkr. off",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "机械刹车延迟错误": {
   "en": "Mechanical brake relay failure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子锁不可用": {
   "en": "Rotor locks not disengaged",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "转子锁检测故障": {
   "en": "Rotor locks detection error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "液压监控：刹车蓄能器压力高": {
   "en": "HydPrsMon: BrAccPrs high",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "风向标锁住：结冰": {
   "en": "Wind vane blocked - Icing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏高等待": {
   "en": "Yaw fail waiting",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏航停止": {
   "en": "Yaw fail stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏航监控定时器故障": {
   "en": "Yaw Monitor EvTimer Inst. Err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏航监控停止因风速仪故障": {
   "en": "Yaw Monitor Stop due to FT Err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "YEM开始减少": {
   "en": "DG: YEM Curtailment Active",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "偏航刹车接触器反馈": {
   "en": "Yaw Brake Contactor Feedback",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变压器油温报警": {
   "en": "Trafo Oil Temp. Alarm",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变压器油温跳闸": {
   "en": "Trafo Oil Temp. Trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "Trafo Oil Level Trip"
   ],
   "repaired": false
  },
  "变压器油位报警": {
   "en": "Trafo Oil Level Alarm",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变压器减压跳闸": {
   "en": "Trafo Pressure Relief Trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停止变流器2的冷却系统": {
   "en": "Conv. 2 cooling system stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变频器冷却水位传感器故障": {
   "en": "Cnv. Twr coolw. level sens err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变频器冷却水报警": {
   "en": "Cnv. Twr coolwater level warn",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变频器冷却水位低": {
   "en": "Cnv. Twr coolwater level low",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "网侧滤波器温度高": {
   "en": "Grid filter temp diff too high",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "岛屿模式：消极停止": {
   "en": "Island Mode: Passive stopped",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "岛屿模式：积极": {
   "en": "Island Mode: Active",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "变频器限功率运行": {
   "en": "DG: Power reduced by converter",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 324 OV 跳闸1-立即": {
   "en": "GenInv: 324 OV Trip1 - Instant",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 325 OV 跳闸2-RMS": {
   "en": "GenInv: 325 OV Trip2 - RMS",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 326 OV 跳闸1-位置序列": {
   "en": "GenInv: 326 OV trip1 - Pos seq",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 327菜单92指令跳闸": {
   "en": "GenInv: 327 Menu 92 Coms Trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "发电机逆变器： 328交流 OV计算": {
   "en": "GenInv: 328 AC OV count",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 324 OV跳闸1-立即": {
   "en": "GrdInv: 324 OV Trip1 - Instant",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 325 OV跳闸2-RMS": {
   "en": "GrdInv: 325 OV Trip2 - RMS",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 326 OV跳闸1-位置序列": {
   "en": "GrdInv: 326 OV trip1 - Pos seq",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 327菜单92指令跳闸": {
   "en": "GrdInv: 327 Menu 92 Coms Trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "并网逆变器： 328交流OV计数": {
   "en": "GrdInv: 328 AC OV count",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5695): 降容运行": {
   "en": "ABBINU (5695): Reduced run",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7580): DDCS通讯故障": {
   "en": "ABBINU (7580): DDCS comm loss",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4B2): PCB空间冷却": {
   "en": "ABBINU (A4B2): PCB space cool",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AFF8): 通讯故障": {
   "en": "ABBINU (AFF8): InterDrive comm",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E00D): ACU风扇故障": {
   "en": "ABBINU (E00D): ACU fan Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E021): 风扇模块1": {
   "en": "ABBINU (E021): Fan module 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E022): 风扇模块2": {
   "en": "ABBINU (E022): Fan module 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E023): 风扇模块3": {
   "en": "ABBINU (E023): Fan module 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E024): 风扇模块4": {
   "en": "ABBINU (E024): Fan module 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E025): 风扇模块5": {
   "en": "ABBINU (E025): Fan module 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E026): 风扇模块6": {
   "en": "ABBINU (E026): Fan module 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (2391): BU 电流故障": {
   "en": "ABBINU (2391): BU current diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (2392): BU 接地": {
   "en": "ABBINU (2392): BU earth leakag",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (2393): BU 交换故障": {
   "en": "ABBINU (2393): BU commutation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (3292): BU 电压故障": {
   "en": "ABBINU (3292): BU voltage diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4000): 发电机电缆": {
   "en": "ABBINU (4000): Generator cable",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4080): 模块功率OT": {
   "en": "ABBINU (4080): Module power OT",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4100): 环境温度": {
   "en": "ABBINU (4100): Ambient temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4110): 控制面板温度": {
   "en": "ABBINU (4110): Ctrl board tmp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4381): PCB 空间冷却": {
   "en": "ABBINU (4381): PCB space cool.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (4982): 外部温度": {
   "en": "ABBINU (4982): External temp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5081): 辅助风扇": {
   "en": "ABBINU (5081): Auxiliary fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5090): STO HW 失效": {
   "en": "ABBINU (5090): STO HW failure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5093): 等级 ID 错误": {
   "en": "ABBINU (5093): Rating ID error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5094): 温度故障": {
   "en": "ABBINU (5094): Meas. Circ. Tmp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5095): 过剩": {
   "en": "ABBINU (5095): Redundant meas.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (5096): 高温": {
   "en": "ABBINU (5096): Overtemperature",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6000): 内部SW故障": {
   "en": "ABBINU (6000): Internal SW err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6182): 不可恢复": {
   "en": "ABBINU (6182): Unrecoverable",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6307): FBA B 绘图": {
   "en": "ABBINU (6307): FBA B mapping",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (64A4): 等级 ID 错误": {
   "en": "ABBINU (64A4): Rating ID fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (64A5): 许可证错误": {
   "en": "ABBINU (64A5): Licensing fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (64B0): 记忆模块错误": {
   "en": "ABBINU (64B0): Memory Unit Det",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (64B1): 内部SSW": {
   "en": "ABBINU (64B1): Internal SSW",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (64FF): 错误重置": {
   "en": "ABBINU (64FF): Fault reset",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6591): 支持/恢复": {
   "en": "ABBINU (6591): Backup/Restore",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (65A2): FBA B 参数": {
   "en": "ABBINU (65A2): FBA B parameter",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6681): EFB 通讯故障": {
   "en": "ABBINU (6681): EFB comm loss",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6682): EFB 版本冲突": {
   "en": "ABBINU (6682): EFB config file",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6683): EFB 无效参数": {
   "en": "ABBINU (6683): EFB invalid par",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6684): EFB 载荷故障": {
   "en": "ABBINU (6684): EFB load fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6685): EFB 错误2": {
   "en": "ABBINU (6685): EFB fault 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (6686): EFB 错误3": {
   "en": "ABBINU (6686): EFB fault 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (71B1): 发电机风扇": {
   "en": "ABBINU (71B1): Generator fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (73F0): 频率高": {
   "en": "ABBINU (73F0): Overfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7520): FBA B 通讯": {
   "en": "ABBINU (7520): FBA B communica",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7583): 线槽单元": {
   "en": "ABBINU (7583): Line side unit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7584): LSU 充电失败": {
   "en": "ABBINU (7584): LSU charge fail",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7585): LSU 启动失败": {
   "en": "ABBINU (7585): LSU start faile",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7586): 内部通讯故障": {
   "en": "ABBINU (7586): InterDrive com",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A81): TUCSO 错误": {
   "en": "ABBINU (7A81): TUCSO fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A8B): FSO 普通错误": {
   "en": "ABBINU (7A8B): FSO general err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A90): FSO 停止整合": {
   "en": "ABBINU (7A90): FSO stop comple",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A91): FSO 安全速度": {
   "en": "ABBINU (7A91): FSO safe speed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A92): FSO 缺乏 eme": {
   "en": "ABBINU (7A92): FSO out of eme",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (7A93): FSO 持续蔓延": {
   "en": "ABBINU (7A93): FSO ramp coast.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (80A0): AI 监管": {
   "en": "ABBINU (80A0): AI Supervision",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (9000): 外部故障": {
   "en": "ABBINU (9000): External fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A2BA): IGBT 超载": {
   "en": "ABBINU (A2BA): IGBT overload.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A2C1): BU 电流故障": {
   "en": "ABBINU (A2C1): BU current diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A2C2): BU 接地": {
   "en": "ABBINU (A2C2): BU earth leakag",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A2C3): BU 交换": {
   "en": "ABBINU (A2C3): BU commutation",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A3C2): BU 电压故障": {
   "en": "ABBINU (A3C2): BU voltage diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A480): 发电机电缆": {
   "en": "ABBINU (A480): Generator cable",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A492): 外部温度": {
   "en": "ABBINU (A492): External temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4A0): 控制面板温度": {
   "en": "ABBINU (A4A0): Ctrl board tmp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4F7): 环境温度 1": {
   "en": "ABBINU (A4F7): Ambient temp 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4F8): 环境温度 2": {
   "en": "ABBINU (A4F8): Ambient temp 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4F9): 环境温度 3": {
   "en": "ABBINU (A4F9): Ambient temp 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4FA): 环境温度 4": {
   "en": "ABBINU (A4FA): Ambient temp 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4FB): 环境温度 5": {
   "en": "ABBINU (A4FB): Ambient temp 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A4FC): 环境温度 5": {
   "en": "ABBINU (A4FC): Ambient temp 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A581): 风扇": {
   "en": "ABBINU (A581): Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A5F1): 过剩": {
   "en": "ABBINU (A5F1): Redundant meas",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A5F2): 高温": {
   "en": "ABBINU (A5F2): Overtemperature",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A681): 内部SW故障": {
   "en": "ABBINU (A681): Internal SW err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A682): Flash清除": {
   "en": "ABBINU (A682): Flash erase spe",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A684): SD卡": {
   "en": "ABBINU (A684): SD card",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A6D2): FBA B 参数": {
   "en": "ABBINU (A6D2): FBA B Parameter",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A781): 发电机风扇": {
   "en": "ABBINU (A781): Generator fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A792): 刹车电阻": {
   "en": "ABBINU (A792): Brake resistor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A795): TTL 输出": {
   "en": "ABBINU (A795): TTL output",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A796): 位置锁住": {
   "en": "ABBINU (A796): Position latch",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A798): 选择编码器": {
   "en": "ABBINU (A798): Encoder Option",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A799): IO通讯故障": {
   "en": "ABBINU (A799): ExtIO Comm Loss",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7B1): 载荷速度流入": {
   "en": "ABBINU (A7B1): Load speed feed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7C2): FBA B 通讯故障": {
   "en": "ABBINU (A7C2): FBA B comm.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7CE): EFB 通讯故障": {
   "en": "ABBINU (A7CE): EFB comm loss",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D0): FSO 普通冲突": {
   "en": "ABBINU (A7D0): FSO general war",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D1): FSO 内部错误": {
   "en": "ABBINU (A7D1): FSO internal er",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D2): FSO IO 错误": {
   "en": "ABBINU (A7D2): FSO IO fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D3): FSO STO 错误": {
   "en": "ABBINU (A7D3): FSO STO fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D4): FSO STO 需求": {
   "en": "ABBINU (A7D4): FSO STO request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D5): FSO 通讯": {
   "en": "ABBINU (A7D5): FSO comm.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D6): FSO 安全总线": {
   "en": "ABBINU (A7D6): FSO safetybus",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D7): FSO 冲突": {
   "en": "ABBINU (A7D7): FSO configurati",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D8): FSO 安全编码": {
   "en": "ABBINU (A7D8): FSO safety enco",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7D9): FSO 编码错误": {
   "en": "ABBINU (A7D9): FSO encoderless",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A7DA): FSO 温度": {
   "en": "ABBINU (A7DA): FSO temperature",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A880): 发电机轴承": {
   "en": "ABBINU (A880): Generator bear.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (A8A0): AI 监管": {
   "en": "ABBINU (A8A0): AI Supervision",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AA90): FSO 停止建模": {
   "en": "ABBINU (AA90): FSO stop comple",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AA91): FSO 安全速度": {
   "en": "ABBINU (AA91): FSO safe speed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AA92): FSO 缺乏eme": {
   "en": "ABBINU (AA92): FSO out of eme",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AA93): FSO 跳板": {
   "en": "ABBINU (AA93): FSO ramp coast",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA1): FSO STO 请求": {
   "en": "ABBINU (AAA1): FSO STO request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA2): FSO SSE 请求": {
   "en": "ABBINU (AAA2): FSO SSE request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA3): FSO SS1 请求": {
   "en": "ABBINU (AAA3): FSO SS1 request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA4): FSO SLS1 命中": {
   "en": "ABBINU (AAA4): FSO SLS1 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA5): FSO SLS2 命中": {
   "en": "ABBINU (AAA5): FSO SLS2 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA6): FSO SLS3 命中": {
   "en": "ABBINU (AAA6): FSO SLS3 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA7): FSO SLS4 命中": {
   "en": "ABBINU (AAA7): FSO SLS4 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA8): FSO SMS 命中": {
   "en": "ABBINU (AAA8): FSO SMS hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAA9): FSO SAR0 命中": {
   "en": "ABBINU (AAA9): FSO SAR0 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAAA): FSO SAR1 命中": {
   "en": "ABBINU (AAAA): FSO SAR1 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAB2): FSO 跳板时间": {
   "en": "ABBINU (AAB2): FSO ramp time",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAB3): FSO 零速 命中": {
   "en": "ABBINU (AAB3): FSO zero spd hi",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AAB4): FSO 速度同步": {
   "en": "ABBINU (AAB4): FSO speed sync",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AC34): LCL ICU 风扇": {
   "en": "ABBINU (AC34): LCL ICU Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AC37): 风扇健康检查": {
   "en": "ABBINU (AC37): Fan healthy chk",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AC38): 不健康风扇": {
   "en": "ABBINU (AC38): Unhealthy fans",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AF80): FA2FA DDCS 通讯故障": {
   "en": "ABBINU (AF80): FA2FA DDCS Com",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AF85): 线槽单元": {
   "en": "ABBINU (AF85): Line side unit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AFE3): 紧急停机": {
   "en": "ABBINU (AFE3): Emergency stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AFE7): 追随": {
   "en": "ABBINU (AFE7): Follower",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AFEC): 外部功率": {
   "en": "ABBINU (AFEC): External power",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (AFF9): 内部冲突": {
   "en": "ABBINU (AFF9): InterDrive conf",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B5F6): ID 运行成功": {
   "en": "ABBINU (B5F6): ID run done",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B790): FSO 普通事件": {
   "en": "ABBINU (B790): FSO general eve",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B791): FSO 诊断": {
   "en": "ABBINU (B791): FSO diagnostics",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B981): 纯外部": {
   "en": "ABBINU (B981): External pure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B982): 纯外部": {
   "en": "ABBINU (B982): External pure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B983): 纯外部": {
   "en": "ABBINU (B983): External pure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B984): 纯外部": {
   "en": "ABBINU (B984): External pure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (B985): 纯外部": {
   "en": "ABBINU (B985): External pure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BA90): FSO 停止": {
   "en": "ABBINU (BA90): FSO stop comple",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BA91): FSO 安全速度": {
   "en": "ABBINU (BA91): FSO safe speed",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BA92): FSO 缺乏eme": {
   "en": "ABBINU (BA92): FSO out of eme",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BA93): FSO 跳板": {
   "en": "ABBINU (BA93): FSO ramp coast",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA1): FSO STO 请求": {
   "en": "ABBINU (BAA1): FSO STO request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA2): FSO SSE 请求": {
   "en": "ABBINU (BAA2): FSO SSE request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA3): FSO SS1 请求": {
   "en": "ABBINU (BAA3): FSO SS1 request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA4): FSO SLS1 命中": {
   "en": "ABBINU (BAA4): FSO SLS1 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA5): FSO SLS2 命中": {
   "en": "ABBINU (BAA5): FSO SLS2 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA6): FSO SLS3 命中": {
   "en": "ABBINU (BAA6): FSO SLS3 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA7): FSO SLS4 命中": {
   "en": "ABBINU (BAA7): FSO SLS4 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA8): FSO SMS 命中": {
   "en": "ABBINU (BAA8): FSO SMS hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAA9): FSO SAR0 命中": {
   "en": "ABBINU (BAA9): FSO SAR0 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAAA): FSO SAR1 命中": {
   "en": "ABBINU (BAAA): FSO SAR1 hit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAB2): FSO 跳板时间": {
   "en": "ABBINU (BAB2): FSO ramp time",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAB3): FSO 零速命中": {
   "en": "ABBINU (BAB3): FSO zero spd hi",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (BAB4): FSO 速度同步": {
   "en": "ABBINU (BAB4): FSO speed sync",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6A1): 通知 1": {
   "en": "ABBINU (C6A1): Notice 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6A2): 通知 2": {
   "en": "ABBINU (C6A2): Notice 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6A3): 通知 3": {
   "en": "ABBINU (C6A3): Notice 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6B3): 通知 4": {
   "en": "ABBINU (C6B3): Notice 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6B4): 通知 5": {
   "en": "ABBINU (C6B4): Notice 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C6C0): 通知 6": {
   "en": "ABBINU (C6C0): Notice 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C791): 通知 7": {
   "en": "ABBINU (C791): Notice 7",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C792): 通知 8": {
   "en": "ABBINU (C792): Notice 8",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7A1): 通知 9": {
   "en": "ABBINU (C7A1): Notice 9",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7A2): 通知 10": {
   "en": "ABBINU (C7A2): Notice 10",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7B1): 通知 11": {
   "en": "ABBINU (C7B1): Notice 11",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7B2): 通知 12": {
   "en": "ABBINU (C7B2): Notice 12",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7C1): 通知 13": {
   "en": "ABBINU (C7C1): Notice 13",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (C7C2): 通知 14": {
   "en": "ABBINU (C7C2): Notice 14",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E001): 风扇模块 1": {
   "en": "ABBINU (E001): Fan module 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E002): 风扇模块 2": {
   "en": "ABBINU (E002): Fan module 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E003): 风扇模块 3": {
   "en": "ABBINU (E003): Fan module 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E004): 风扇模块 4": {
   "en": "ABBINU (E004): Fan module 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E005): 风扇模块 5": {
   "en": "ABBINU (E005): Fan module 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E006): 风扇模块 6": {
   "en": "ABBINU (E006): Fan module 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E00C): LCL ICU 风扇": {
   "en": "ABBINU (E00C): LCL ICU Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E00E): 液体问题": {
   "en": "ABBINU (E00E): Liquid problem",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E033): LCL ICU 风扇": {
   "en": "ABBINU (E033): LCL ICU Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (E050): 错误参数": {
   "en": "ABBINU (E050): Faulty paramet.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE01): LSU 风扇模块 1": {
   "en": "ABBINU (EE01): LSU fan mod. 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE02): LSU 风扇模块 2": {
   "en": "ABBINU (EE02): LSU fan mod. 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE03): LSU 风扇模块 3": {
   "en": "ABBINU (EE03): LSU fan mod. 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE04): LSU 风扇模块 4": {
   "en": "ABBINU (EE04): LSU fan mod. 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE05): LSU 风扇模块 5": {
   "en": "ABBINU (EE05): LSU fan mod. 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE06): LSU 风扇模块 6": {
   "en": "ABBINU (EE06): LSU fan mod. 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE21): LSU 风扇模块 1": {
   "en": "ABBINU (EE21): LSU fan mod. 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE22): LSU 风扇模块 2": {
   "en": "ABBINU (EE22): LSU fan mod. 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE23): LSU 风扇模块 3": {
   "en": "ABBINU (EE23): LSU fan mod. 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE24): LSU 风扇模块 4": {
   "en": "ABBINU (EE24): LSU fan mod. 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE25): LSU 风扇模块 5": {
   "en": "ABBINU (EE25): LSU fan mod. 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (EE26): LSU 风扇模块 6": {
   "en": "ABBINU (EE26): LSU fan mod. 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (FF63): 诊断": {
   "en": "ABBINU (FF63): Diagnostics",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBINU (FF7E): 追随": {
   "en": "ABBINU (FF7E): Follower",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABB未知：使用ABB手柄": {
   "en": "ABB Unknown: Use ABB HandPanel",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (3E01): FRT电网故障": {
   "en": "ABBISU (3E01): FRT Grid Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (4E80): 模块PSU温度": {
   "en": "ABBISU (4E80): Module PSU temp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE08): FRT电网报警": {
   "en": "ABBISU (AE08): FRT Grid Warn.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE72): 内部通讯": {
   "en": "ABBISU (AE72): InterDrive comm",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE0D): ACU 风扇故障": {
   "en": "ABBISU (EE0D): ACU fan Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (3E0B): 输出相": {
   "en": "ABBISU (3E0B): Output phase",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (3E0C): 自动稳相": {
   "en": "ABBISU (3E0C): Autophasing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (3E0F): Mfrt 电网故障": {
   "en": "ABBISU (3E0F): Mfrt Grid Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (4E09): 外部温度": {
   "en": "ABBISU (4E09): Ambient temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (4E81): PCB 空间冷却": {
   "en": "ABBISU (4E81): PCB space cool",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (5E0A): 测量": {
   "en": "ABBISU (5E0A): Measurement",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (5E12): Bamu 组态": {
   "en": "ABBISU (5E12): Bamu configurat",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (5E14): 测量": {
   "en": "ABBISU (5E14): Measurement",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (5E15): 高温": {
   "en": "ABBISU (5E15): Overtemperature",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (5E16): 过剩": {
   "en": "ABBISU (5E16): Redundant meas.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E19): 同步": {
   "en": "ABBISU (6E19): Synchronization",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E1A): 等级ID故障": {
   "en": "ABBISU (6E1A): Rating ID fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E1B): 备份/修复": {
   "en": "ABBISU (6E1B): Backup/Restore",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E1C): 紧急停机": {
   "en": "ABBISU (6E1C): Emergency stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E1D): 内部SW故障": {
   "en": "ABBISU (6E1D): Internal SW err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6E1E): 不可恢复": {
   "en": "ABBISU (6E1E): Unrecoverable",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6EA5): 许可错误": {
   "en": "ABBISU (6EA5): Licensing fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (6EFF): 错误重置": {
   "en": "ABBISU (6EFF): Fault reset",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E02): 刹车电阻": {
   "en": "ABBISU (7E02): Brake resistor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E03): 刹车温度过高": {
   "en": "ABBISU (7E03): BR excess temp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E04): 刹车电阻": {
   "en": "ABBISU (7E04): Brake resistor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E05): BC 短缺": {
   "en": "ABBISU (7E05): BC short circ.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E06): BC IGBT 温度": {
   "en": "ABBISU (7E06): BC IGBT temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E07): 刹车关闭": {
   "en": "ABBISU (7E07): Brake closing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E08): 刹车打开": {
   "en": "ABBISU (7E08): Brake opening",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E09): 刹车不允许": {
   "en": "ABBISU (7E09): Brake not allow",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E0A): 超频": {
   "en": "ABBISU (7E0A): Overfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E0E): TUCSO 错误": {
   "en": "ABBISU (7E0E): TUCSO fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E10): IO通讯故障": {
   "en": "ABBISU (7E10): ExtIO Comm Loss",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E11): DDCS 控制": {
   "en": "ABBISU (7E11): DDCS controller",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (7E12): 内部通讯": {
   "en": "ABBISU (7E12): InterDrive com",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E00): 过电压": {
   "en": "ABBISU (8E00): Overvoltage",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E01): 欠压": {
   "en": "ABBISU (8E01): Undervoltage",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E02): 超频": {
   "en": "ABBISU (8E02): Overfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E03): 低频": {
   "en": "ABBISU (8E03): Underfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E04): 滑行 OV": {
   "en": "ABBISU (8E04): Sliding OV",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E05): 变动改变": {
   "en": "ABBISU (8E05): Rate of change",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E06): AI 监管": {
   "en": "ABBISU (8E06): AI Supervision",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (8E07): 网丢失": {
   "en": "ABBISU (8E07): Net lost",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (9E03): 外部故障 3": {
   "en": "ABBISU (9E03): Ext. Fault 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (9E04): 外部故障 4": {
   "en": "ABBISU (9E04): Ext. Fault 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (9E05): 外部故障 5": {
   "en": "ABBISU (9E05): Ext. Fault 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE22): 发电机无通讯": {
   "en": "ABBISU (AE22): Generator nom.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE23): 无发电机数据": {
   "en": "ABBISU (AE23): No gen. Data",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE28): 刹车电阻": {
   "en": "ABBISU (AE28): Brake resistor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE29): 刹车电阻": {
   "en": "ABBISU (AE29): Brake resistor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE2A): 刹车高温": {
   "en": "ABBISU (AE2A): BR excess temp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE2B): 刹车数据": {
   "en": "ABBISU (AE2B): BR data",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE2C): BC 短缺": {
   "en": "ABBISU (AE2C): BC short circ.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE2D): BC IGBT 过量": {
   "en": "ABBISU (AE2D): BC IGBT excess",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE34): FSO 错误": {
   "en": "ABBISU (AE34): FSO int. Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE35): FSO IO 错误": {
   "en": "ABBISU (AE35): FSO IO fault.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE36): FSO STO 错误": {
   "en": "ABBISU (AE36): FSO STO fault.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE37): FSO STO 请求": {
   "en": "ABBISU (AE37): FSO STO request",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE38): FSO 通讯": {
   "en": "ABBISU (AE38): FSO Comm.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE39): FSO 安全总线": {
   "en": "ABBISU (AE39): FSO Safetybus",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE3A): FSO 错误": {
   "en": "ABBISU (AE3A): FSO conf. Fault",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE3B): FSO 安全 FEN": {
   "en": "ABBISU (AE3B): FSO safety FEN",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE3C): FSO 速度": {
   "en": "ABBISU (AE3C): FSO Speed est",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE3D): FSO 温度": {
   "en": "ABBISU (AE3D): FSO Temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE3F): 发电机轴承": {
   "en": "ABBISU (AE3F): Generator bear",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE40): 延迟输出": {
   "en": "ABBISU (AE40): Output relay",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE41): 供应单元": {
   "en": "ABBISU (AE41): Supply unit",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE42): 功率报警": {
   "en": "ABBISU (AE42): Power ups warn",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE43): 主断路器": {
   "en": "ABBISU (AE43): Main contactor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE44): DC 充电报警": {
   "en": "ABBISU (AE44): DC charge warn",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE45): 持续1报警": {
   "en": "ABBISU (AE45): On-Time 1 warn",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE46): 持续2报警": {
   "en": "ABBISU (AE46): On-Time 2 warn",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE47): 边缘计数 1": {
   "en": "ABBISU (AE47): Edge counter 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE48): 边缘计数 2": {
   "en": "ABBISU (AE48): Edge counter 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE49): 值覆盖 1": {
   "en": "ABBISU (AE49): Value integ. 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4A): 值覆盖 2": {
   "en": "ABBISU (AE4A): Value integ. 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4B): 设备清洁": {
   "en": "ABBISU (AE4B): Device clean",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4C): DC 电容": {
   "en": "ABBISU (AE4C): DC capacitor",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4D): 柜体风扇": {
   "en": "ABBISU (AE4D): Cabinet fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4E): 冷却风扇": {
   "en": "ABBISU (AE4E): Cooling fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE4F): 加冷却风扇": {
   "en": "ABBISU (AE4F): Add cool fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE50): 信号监管": {
   "en": "ABBISU (AE50): Signal supervis",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE53): 外部报警 3": {
   "en": "ABBISU (AE53): Ext. Warn 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE54): 外部报警 4": {
   "en": "ABBISU (AE54): Ext. Warn 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE55): 外部报警 5": {
   "en": "ABBISU (AE55): Ext. Warn 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE5E): 自动稳相": {
   "en": "ABBISU (AE5E): Autophasing",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE61): 过电压": {
   "en": "ABBISU (AE61): Overvoltage",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE62): 欠压": {
   "en": "ABBISU (AE62): Undervoltage",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE63): 超频": {
   "en": "ABBISU (AE63): Overfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE64): 低频": {
   "en": "ABBISU (AE64): Underfrequency",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE65): 滑行挤满": {
   "en": "ABBISU (AE65): Sliding overvol",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE66): 变化": {
   "en": "ABBISU (AE66): Rate of change",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE67): AI 监管": {
   "en": "ABBISU (AE67): AI Supervision",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE68): 紧急停机": {
   "en": "ABBISU (AE68): Emergency stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE69): 紧急停机": {
   "en": "ABBISU (AE69): Emergency stop",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE6D): DDCS 控制器": {
   "en": "ABBISU (AE6D): DDCS controller",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE6E): 内部SW错误": {
   "en": "ABBISU (AE6E): Internal SW err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE6F): 环境温度": {
   "en": "ABBISU (AE6F): Ambient temp",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE70): 高温": {
   "en": "ABBISU (AE70): Overtemperature",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE71): 过剩": {
   "en": "ABBISU (AE71): Redundant meas",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE73): 风扇": {
   "en": "ABBISU (AE73): Fan",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE77): 内部冲突": {
   "en": "ABBISU (AE77): InterDrive conf",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE78): 网点丢失": {
   "en": "ABBISU (AE78): Net lost",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE79): 环境温度 1": {
   "en": "ABBISU (AE79): Ambient temp 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE7A): 环境温度 2": {
   "en": "ABBISU (AE7A): Ambient temp 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE7B): 环境温度 3": {
   "en": "ABBISU (AE7B): Ambient temp 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE7C): 环境温度 4": {
   "en": "ABBISU (AE7C): Ambient temp 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE7D): 环境温度 5": {
   "en": "ABBISU (AE7D): Ambient temp 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE83): 数据保存故障": {
   "en": "ABBISU (AE83): Data saving err",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AE84): SD 卡": {
   "en": "ABBISU (AE84): SD card",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (AEB2): PCB 空间冷却": {
   "en": "ABBISU (AEB2): PCB space cool",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE00): FSO 事件": {
   "en": "ABBISU (BE00): FSO Events",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE01): FSO 诊断": {
   "en": "ABBISU (BE01): FSO diagnosis",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE02): MCB 维护": {
   "en": "ABBISU (BE02): MCB maintenance",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE03): 外部事件 1": {
   "en": "ABBISU (BE03): Ext. Event 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE04): 外部事件 2": {
   "en": "ABBISU (BE04): Ext. Event 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE05): 外部事件 3": {
   "en": "ABBISU (BE05): Ext. Event 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE06): 外部事件 4": {
   "en": "ABBISU (BE06): Ext. Event 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (BE07): 外部事件 5": {
   "en": "ABBISU (BE07): Ext. Event 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C6A1): 注意 1": {
   "en": "ABBISU (C6A1): Notice 1",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C6A2): 注意 2": {
   "en": "ABBISU (C6A2): Notice 2",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C6A3): 注意 3": {
   "en": "ABBISU (C6A3): Notice 3",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C6B3): 注意 4": {
   "en": "ABBISU (C6B3): Notice 4",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C6B4): 注意 5": {
   "en": "ABBISU (C6B4): Notice 5",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C791): 注意 6": {
   "en": "ABBISU (C791): Notice 6",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C792): 注意 7": {
   "en": "ABBISU (C792): Notice 7",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7A1): 注意 8": {
   "en": "ABBISU (C7A1): Notice 8",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7A2): 注意 9": {
   "en": "ABBISU (C7A2): Notice 9",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7B1): 注意 10": {
   "en": "ABBISU (C7B1): Notice 10",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7B2): 注意 11": {
   "en": "ABBISU (C7B2): Notice 11",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7C1): 注意 12": {
   "en": "ABBISU (C7C1): Notice 12",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (C7C2): 注意 13": {
   "en": "ABBISU (C7C2): Notice 13",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE50): 入口冷却压力": {
   "en": "ABBISU (EE50): Inlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE51): 入口冷却压力": {
   "en": "ABBISU (EE51): Inlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE52): 出口冷却压力": {
   "en": "ABBISU (EE52): Outlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE53): 出口冷却压力": {
   "en": "ABBISU (EE53): Outlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE54): 冷却压力不同": {
   "en": "ABBISU (EE54): Cool prs diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE55): 冷却压力不同": {
   "en": "ABBISU (EE55): Cool prs diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE60): 入口冷却压力": {
   "en": "ABBISU (EE60): Inlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE61): 入口冷却压力": {
   "en": "ABBISU (EE61): Inlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE62): 出口冷却压力": {
   "en": "ABBISU (EE62): Outlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE63): 出口冷却压力": {
   "en": "ABBISU (EE63): Outlet cool prs",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE64): 冷却压力不同": {
   "en": "ABBISU (EE64): Cool prs diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (EE65): 冷却压力不同": {
   "en": "ABBISU (EE65): Cool prs diff",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE00): FB A 强行跳闸": {
   "en": "ABBISU (FE00): FB A force trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE01): FB B 强行跳闸": {
   "en": "ABBISU (FE01): FB B force trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE02): EFB 强行跳闸": {
   "en": "ABBISU (FE02): EFB force trip",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE03): XSTO IN1 打开": {
   "en": "ABBISU (FE03): XSTO IN1 open",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE04): XSTO IN2 打开": {
   "en": "ABBISU (FE04): XSTO IN2 open",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ABBISU (FE05): ID 运行": {
   "en": "ABBISU (FE05): ID run",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "ACS 信号质量低": {
   "en": "ACS signal quality low",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "功率折叠错误": {
   "en": "Power envelope table error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "失败记录 溢出 - 偏航 - 空转": {
   "en": "Faillog overflow - Yaw - Idle",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "失败记录 溢出 - 偏航": {
   "en": "Faillog overflow - Yaw",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "失败记录 溢出 - 空转": {
   "en": "Faillog overflow - Idle",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "失败记录 溢出": {
   "en": "Faillog overflow",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "UPS故障": {
   "en": "UPS-failure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "UPS电池故障": {
   "en": "UPS battery failure",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "UPS电池电压低": {
   "en": "UPS Battery Low",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "UPS旁路错误": {
   "en": "UPS Bypass error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "辅助网侧供给孤立": {
   "en": "Auxiliary grid supply isolated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "CAN总线：SUM1 模块初始化错误": {
   "en": "CAN:SUM1 module init. error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "CAN总线：SUM1 通讯错误": {
   "en": "CAN:SUM1 Communication error",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SUM1模块断电检测": {
   "en": "SUM1 module powerdown detected",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "SUM模块SW版本冲突": {
   "en": "SUM module SW ver. Conflict",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停机类型S10测试": {
   "en": "Test of Stop Type S10",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停机类型S20测试": {
   "en": "Test of Stop Type S20",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停机类型S30测试": {
   "en": "Test of Stop Type S30",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停机类型S40测试": {
   "en": "Test of Stop Type S40",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "停机类型S50测试": {
   "en": "Test of Stop Type S50",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "航空灯系统报警": {
   "en": "Aviation Light System Warning",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "航空灯塔灯报警": {
   "en": "Aviation Tower Light Warning",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "超速测试开始": {
   "en": "Overspeed Test Initiated",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "超速测试失败": {
   "en": "Overspeed Test Aborted",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [
    "OverSpeed test Failed"
   ],
   "repaired": false
  },
  "转子不平衡-低温": {
   "en": "Rotor imbalance - Low temp.",
   "source": "swt4mw_fault_translation:alarm",
   "variants": [],
   "repaired": false
  },
  "事件记录末端": {
   "en": "end of eventlog",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "电脑重启": {
   "en": "Computer restarted",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初始化 用户-参数": {
   "en": "Initializing user-parameters",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "获得CPU-EE参数": {
   "en": "Getting CPU-EE-parameters...",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "获得REL-EE参数": {
   "en": "Getting REL-EE-parameters...",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初始化 通信": {
   "en": "Initializing communication",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初始化 用户-软件": {
   "en": "Initializing user-software",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "用户-软件 运行": {
   "en": "User-software running",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "功率下降": {
   "en": "Power drop",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "CPU EEProm故障": {
   "en": "CPU EEProm error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "REL EEProm故障": {
   "en": "REL EEProm error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "故障代码删除，数据故障": {
   "en": "Errorlog deleted, data error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "HT远程连接用户": {
   "en": "HT remote connect User:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "HT远程不连接用户": {
   "en": "HT remote disconnect  User:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "远程刷写 用户": {
   "en": "Remote write User:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "远程刷写 值": {
   "en": "Remote write Value:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初始化CAN系统": {
   "en": "Initializing can system",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "重置故障记录": {
   "en": "Reset error log",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "大发电机切入": {
   "en": "Large generator Cut-in",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "大发电机切入 转速": {
   "en": "Late cut-in of gen. RPM:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "发电机切出": {
   "en": "Cut-out of generator",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "发电机快速切出": {
   "en": "Fast cut-out of generator",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "最小发电量切出，KW": {
   "en": "Min production cut-out, kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "服务输入可行": {
   "en": "Service entrylevel is now:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "参数改变": {
   "en": "Change of parameter UP-",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机解缆": {
   "en": "Stopped, untwisting cables",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风速太大不能操作": {
   "en": "Windsp. too high to operate",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "最小发电量切出": {
   "en": "Max no.of min prod. cut-out",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "发电机切出，刹车故障，KW": {
   "en": "Gen. cut-out,brake err  kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "发电机切出，刹车故障，RPM": {
   "en": "Gen. cut-out,brake err RPM:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风速/测量故障 KW": {
   "en": "Wind-/pwr-measurem err kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风速/测量故障 m/s": {
   "en": "Wind-/pwr-measurem err m/s:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "主要小发电机，RPM": {
   "en": "Small Gen. on mains, RPM:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "小发电机切出，RPM": {
   "en": "Small Gen. cut-out, RPM:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "大发电机切出，KW": {
   "en": "Large Gen cut-out, kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "小发电机切出，KW": {
   "en": "Small Gen. cut-out, kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "HCU故障，发电机转速": {
   "en": "HCU-error   Generator rpm:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航方向故障": {
   "en": "Yaw-direction error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "切出，不同功率 KW": {
   "en": "Cut-out, Diff. power kW:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PFC切出，KVAr": {
   "en": "PFC cut out, kVAr:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PFC切出，不对称": {
   "en": "PFC cut out, asymmetry.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "快速功率减小": {
   "en": "Fast power reduction",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "噪音小开始，领域": {
   "en": "Low Noise start, Zone:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "噪音小停机，领域": {
   "en": "Low Noise stop, Zone:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "润滑延迟": {
   "en": "Lubrication postponed:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变流器检测OK": {
   "en": "Inverter test OK:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初级单元激活": {
   "en": "Primary unit activated :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "次级单元激活": {
   "en": "Secondary unit activated :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "气象工具改变": {
   "en": "Weather instrument change:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "峰值能量，功率减小": {
   "en": "Peakenergy, power reduced:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "持续计算校验": {
   "en": "Last calculated checksum:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航变频器跳闸": {
   "en": "Yaw converter trip",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "叶片边缘振动-减少操作": {
   "en": "Bld Edg Vibr - Reduced Oper",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "边缘频率标定": {
   "en": "Edge freq. calib.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "错误地址校验": {
   "en": "Adress of failed checksum:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风速仪现在可行": {
   "en": "Anemometer now active on  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风向标现在可行": {
   "en": "Wind vane now active on",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初级-风速": {
   "en": "Primary - wind speed",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "次级风速": {
   "en": "Secondary wind speed",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初级-风能": {
   "en": "Primary - wind energy",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "次级风能": {
   "en": "Secondary wind energy",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "初级-风向": {
   "en": "Primary - wind direction",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "次级风向": {
   "en": "Secondary wind direction",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "WSS风": {
   "en": "WSS wind",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "WSS功率": {
   "en": "WSS Power",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "WSS温度": {
   "en": "WSS Temperature",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PECe 网侧逆变器故障": {
   "en": "PECe grid inverter error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PECe 机侧逆变器故障": {
   "en": "PECe gen. inverter error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "频率控制减小": {
   "en": "Frequency Control Red.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "网侧逆变器-未知故障": {
   "en": "GrdInv - Unknown error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "机侧逆变器-未知故障": {
   "en": "GenInv - Unknown error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "机侧-未知故障": {
   "en": "INU - Unknown error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "网侧-未知故障": {
   "en": "ISU - Unknown error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "塔筒温度Mval重启": {
   "en": "Temp Slip Tow MVal Restart:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "机舱温度Mval重启": {
   "en": "Temp Slip Nac MVal Restart:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "TLC-超出载荷": {
   "en": "TLC - Load out of range",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "从未使用": {
   "en": "Never Used",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机时G-sensor激活": {
   "en": "G-Sensor act. while stopped",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "高压柜打开": {
   "en": "Switch gear open",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "高压柜关闭": {
   "en": "Switch gear closed",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "高压柜未知": {
   "en": "Switch gear unknown",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "高压柜跳闸": {
   "en": "Switch gear tripped",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机时DAM激活": {
   "en": "DAM activated while stopped",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机追踪故障，跳板": {
   "en": "Stop Tracking Err, Ramp",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机追踪故障，不同": {
   "en": "Stop Tracking Err, Diff.  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "停机追踪故障，超时": {
   "en": "Stop Tracking Err, Timeout:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ADR上VAR操作失败": {
   "en": "Failed handling VAR on ADR:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器参数升级": {
   "en": "Inverter param updated",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "气象单元超出范围": {
   "en": "Weather unit out of range :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风速仪参数改变": {
   "en": "FT parameter change",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器冷却功能": {
   "en": "Converter cooling malfunc :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PECe 变频器报警": {
   "en": "PECe inverter Warning",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PECe 变频器过程错误": {
   "en": "PECe Conv. Process Fault  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "错误荷载校验": {
   "en": "Bad FlapLoad calibration",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "齿轮箱试车失败": {
   "en": "Gearbox runin aborted",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "空气气隙监控": {
   "en": "Air Gap monitoring",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "HM控制器错误": {
   "en": "HM Controller error, ErCde:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "结冰检测": {
   "en": "Ice detection",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "边缘振动减速": {
   "en": "Speed reduced by Edge Vib.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "1P取消": {
   "en": "1P cancellation disabled",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "操作中大风行驶": {
   "en": "High Wind Ride Through Oper",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "TLC促进状态": {
   "en": "TLC Boost Status",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "传感器故障促进停止": {
   "en": "Boost off due to Sens. Err.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器1跳闸故障": {
   "en": "Converter 1 Trip Error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器2跳闸故障": {
   "en": "Converter 2 Trip Error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变桨校验开始": {
   "en": "Pitch calibration started :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "阀校验开始": {
   "en": "Valve calibration started :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "叶片A方位角": {
   "en": "Blade:A Azimuth:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "叶片B方位角": {
   "en": "Blade:B Azimuth:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "叶片C方位角": {
   "en": "Blade:C Azimuth:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "风机操作": {
   "en": "Turbine operation",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器起机故障": {
   "en": "Converter start error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "断路器清洁完成": {
   "en": "Breaker cleaning finished :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "检测到结冰": {
   "en": "De-icing:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "CAN模块编程": {
   "en": "Programming of CAN module:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "故障记录损坏，清除": {
   "en": "Eventlog corrupted, cleared",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "系统清除缓存": {
   "en": "Memory cleared by system",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "功率增加": {
   "en": "Power boost",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "清楚错误记录，错误编码": {
   "en": "Faillog cleanup, fail num :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "SRSG型号数据错误": {
   "en": "SRSG type data error",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "主断路器切出测试": {
   "en": "Main breaker cut out test :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "PMG断路器切出测试": {
   "en": "PMG breaker cut out test",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "系统记录事件": {
   "en": "System Live Event",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "模拟系统检测": {
   "en": "Simulator system detected :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "配置错误-型号": {
   "en": "Configuration error - Type:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 机侧-未知错误": {
   "en": "ABB 880 INU - Unknown Err :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 网侧-未知错误": {
   "en": "ABB 880 ISU - Unknown Err :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 机侧-堆叠错误": {
   "en": "ABB 880 INU - Stack Err",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 网侧-堆叠错误": {
   "en": "ABB 880 ISU - Stack Err",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变频器冷却最后机会": {
   "en": "Conv. cooling last chance :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "CAN序列号改变": {
   "en": "CAN serial number changed:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "CAN序列号改变导致缓存清除": {
   "en": "MemClear By CANSerialChange",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "远程润滑": {
   "en": "Remote lubrication motion :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航尝试计数加速": {
   "en": "Yaw Retry count exceeded  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航系统加速失败": {
   "en": "Yaw System Fail exceeded  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "超声波传感器导致偏航失败": {
   "en": "Yaw Error by sonic sensor :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "机械传感器导致偏航失败": {
   "en": "Yaw Error by mech sensor  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航不可行-偏航速度": {
   "en": "YawDisabled-yawSpeed dev :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "超速测试通过": {
   "en": "OverSpeed test Passed",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "3P振动": {
   "en": "High 3P side-side vibr.",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "SUM传感器": {
   "en": "SUM Sensor",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "SUN转变开始": {
   "en": "SUM transfer started",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 辅助代码": {
   "en": "ABB 880 Auxiliary Code :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ABB 880 故障/报警": {
   "en": "ABB 880 Error/Warning :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "SUM NV RAM刷写": {
   "en": "SUM NV RAM write",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "HTRT功率分解": {
   "en": "Power degraded due to HTRT:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ACS输入质量差": {
   "en": "ACS bad input quality:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "调试复位": {
   "en": "Commissioning reset",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变桨松开-速度减小": {
   "en": "Pitch relax - speed reduc.:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变桨松开-位置锁定": {
   "en": "Pitch relax - pos. latched:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "ADR程序失败": {
   "en": "Failed PROCEDURE on ADR  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "运行事件里的速度": {
   "en": "Speed at operation event",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "运行事件里的变桨": {
   "en": "Pitch at operation event  :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "轮毂变桨阀检查": {
   "en": "Hub Pitch Valve Check:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "轮毂压力传感器检查": {
   "en": "Hub Pressure Sensor Check:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "运行事件": {
   "en": "Operation event",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "雷电检测": {
   "en": "Lightning Detected",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "SSVG故障": {
   "en": "SSVG Err",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航故障监控减小": {
   "en": "YawErrMon CurtailmentActive",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "偏航刹车接触器故障": {
   "en": "Yaw Brake Contactor error :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "安全变桨蓄能器": {
   "en": "SafePitch Accumulator",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "安全变桨蓄能器Prs": {
   "en": "SafePitch Accumulator Prs :",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "变桨蓄能器检查": {
   "en": "Pitch Accumulator Check",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "大风变桨执行": {
   "en": "Pith Exec postp high Wind",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "齿轮箱润滑监控": {
   "en": "Gearbox lubrication monit.:",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "用户指令": {
   "en": "Command issued by user",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  },
  "用户手柄登录": {
   "en": "Handterminal login by user",
   "source": "swt4mw_fault_translation:event",
   "variants": [],
   "repaired": false
  }
 }
}