guanlan-src/vendor/pyfastapi/websockets/legacy/protocol.py

from __future__ import annotations

import asyncio
import codecs
import collections
import logging
import random
import ssl
import struct
import time
import traceback
import uuid
import warnings
import weakref
from collections.abc import AsyncIterable, AsyncIterator, Awaitable, Iterable, Mapping
from typing import Any, Callable, Deque, cast

from ..datastructures import Headers
from ..exceptions import (
    ConnectionClosed,
    ConnectionClosedError,
    ConnectionClosedOK,
    InvalidState,
    PayloadTooBig,
    ProtocolError,
)
from ..extensions import Extension
from ..frames import (
    BINARY as OP_BINARY,
    CLOSE as OP_CLOSE,
    CONT as OP_CONT,
    OK_CLOSE_CODES,
    PING as OP_PING,
    PONG as OP_PONG,
    TEXT as OP_TEXT,
    Close,
    CloseCode,
    Opcode,
)
from ..protocol import State
from ..typing import BytesLike, Data, DataLike, LoggerLike, Subprotocol
from .framing import Frame, prepare_ctrl, prepare_data


__all__ = ["WebSocketCommonProtocol"]


# In order to ensure consistency, the code always checks the current value of
# WebSocketCommonProtocol.state before assigning a new value and never yields
# between the check and the assignment.


class WebSocketCommonProtocol(asyncio.Protocol):
    """
    WebSocket connection.

    :class:`WebSocketCommonProtocol` provides APIs shared between WebSocket
    servers and clients. You shouldn't use it directly. Instead, use
    :class:`~websockets.legacy.client.WebSocketClientProtocol` or
    :class:`~websockets.legacy.server.WebSocketServerProtocol`.

    This documentation focuses on low-level details that aren't covered in the
    documentation of :class:`~websockets.legacy.client.WebSocketClientProtocol`
    and :class:`~websockets.legacy.server.WebSocketServerProtocol` for the sake
    of simplicity.

    Once the connection is open, a Ping_ frame is sent every ``ping_interval``
    seconds. This serves as a keepalive. It helps keeping the connection open,
    especially in the presence of proxies with short timeouts on inactive
    connections. Set ``ping_interval`` to :obj:`None` to disable this behavior.

    .. _Ping: https://datatracker.ietf.org/doc/html/rfc6455#section-5.5.2

    If the corresponding Pong_ frame isn't received within ``ping_timeout``
    seconds, the connection is considered unusable and is closed with code 1011.
    This ensures that the remote endpoint remains responsive. Set
    ``ping_timeout`` to :obj:`None` to disable this behavior.

    .. _Pong: https://datatracker.ietf.org/doc/html/rfc6455#section-5.5.3

    See the discussion of :doc:`keepalive <../../topics/keepalive>` for details.

    The ``close_timeout`` parameter defines a maximum wait time for completing
    the closing handshake and terminating the TCP connection. For legacy
    reasons, :meth:`close` completes in at most ``5 * close_timeout`` seconds
    for clients and ``4 * close_timeout`` for servers.

    ``close_timeout`` is a parameter of the protocol because websockets usually
    calls :meth:`close` implicitly upon exit:

    * on the client side, when using :func:`~websockets.legacy.client.connect`
      as a context manager;
    * on the server side, when the connection handler terminates.

    To apply a timeout to any other API, wrap it in :func:`~asyncio.timeout` or
    :func:`~asyncio.wait_for`.

    The ``max_size`` parameter enforces the maximum size for incoming messages
    in bytes. The default value is 1 MiB. If a larger message is received,
    :meth:`recv` will raise :exc:`~websockets.exceptions.ConnectionClosedError`
    and the connection will be closed with code 1009.

    The ``max_queue`` parameter sets the maximum length of the queue that
    holds incoming messages. The default value is ``32``. Messages are added
    to an in-memory queue when they're received; then :meth:`recv` pops from
    that queue. In order to prevent excessive memory consumption when
    messages are received faster than they can be processed, the queue must
    be bounded. If the queue fills up, the protocol stops processing incoming
    data until :meth:`recv` is called. In this situation, various receive
    buffers (at least in :mod:`asyncio` and in the OS) will fill up, then the
    TCP receive window will shrink, slowing down transmission to avoid packet
    loss.

    Since Python can use up to 4 bytes of memory to represent a single
    character, each connection may use up to ``4 * max_size * max_queue``
    bytes of memory to store incoming messages. By default, this is 128 MiB.
    You may want to lower the limits, depending on your application's
    requirements.

    The ``read_limit`` argument sets the high-water limit of the buffer for
    incoming bytes. The low-water limit is half the high-water limit. The
    default value is 64 KiB, half of asyncio's default (based on the current
    implementation of :class:`~asyncio.StreamReader`).

    The ``write_limit`` argument sets the high-water limit of the buffer for
    outgoing bytes. The low-water limit is a quarter of the high-water limit.
    The default value is 64 KiB, equal to asyncio's default (based on the
    current implementation of ``FlowControlMixin``).

    See the discussion of :doc:`memory usage <../../topics/memory>` for details.

    Args:
        logger: Logger for this server.
            It defaults to ``logging.getLogger("websockets.protocol")``.
            See the :doc:`logging guide <../../topics/logging>` for details.
        ping_interval: Interval between keepalive pings in seconds.
            :obj:`None` disables keepalive.
        ping_timeout: Timeout for keepalive pings in seconds.
            :obj:`None` disables timeouts.
        close_timeout: Timeout for closing the connection in seconds.
            For legacy reasons, the actual timeout is 4 or 5 times larger.
        max_size: Maximum size of incoming messages in bytes.
            :obj:`None` disables the limit.
        max_queue: Maximum number of incoming messages in receive buffer.
            :obj:`None` disables the limit.
        read_limit: High-water mark of read buffer in bytes.
        write_limit: High-water mark of write buffer in bytes.

    """

    # There are only two differences between the client-side and server-side
    # behavior: masking the payload and closing the underlying TCP connection.
    # Set is_client = True/False and side = "client"/"server" to pick a side.
    is_client: bool
    side: str = "undefined"

    def __init__(
        self,
        *,
        logger: LoggerLike | None = None,
        ping_interval: float | None = 20,
        ping_timeout: float | None = 20,
        close_timeout: float | None = None,
        max_size: int | None = 2**20,
        max_queue: int | None = 2**5,
        read_limit: int = 2**16,
        write_limit: int = 2**16,
        # The following arguments are kept only for backwards compatibility.
        host: str | None = None,
        port: int | None = None,
        secure: bool | None = None,
        legacy_recv: bool = False,
        loop: asyncio.AbstractEventLoop | None = None,
        timeout: float | None = None,
    ) -> None:
        if legacy_recv:  # pragma: no cover
            warnings.warn("legacy_recv is deprecated", DeprecationWarning)

        # Backwards compatibility: close_timeout used to be called timeout.
        if timeout is None:
            timeout = 10
        else:
            warnings.warn("rename timeout to close_timeout", DeprecationWarning)
        # If both are specified, timeout is ignored.
        if close_timeout is None:
            close_timeout = timeout

        # Backwards compatibility: the loop parameter used to be supported.
        if loop is None:
            loop = asyncio.get_event_loop()
        else:
            warnings.warn("remove loop argument", DeprecationWarning)

        self.ping_interval = ping_interval
        self.ping_timeout = ping_timeout
        self.close_timeout = close_timeout
        self.max_size = max_size
        self.max_queue = max_queue
        self.read_limit = read_limit
        self.write_limit = write_limit

        # Unique identifier. For logs.
        self.id: uuid.UUID = uuid.uuid4()
        """Unique identifier of the connection. Useful in logs."""

        # Logger or LoggerAdapter for this connection.
        if logger is None:
            logger = logging.getLogger("websockets.protocol")
        self.logger: LoggerLike = logging.LoggerAdapter(
            logger,
            {"websocket": weakref.proxy(self)},
        )
        """Logger for this connection."""

        # Track if DEBUG is enabled. Shortcut logging calls if it isn't.
        self.debug = logger.isEnabledFor(logging.DEBUG)

        self.loop = loop

        self._host = host
        self._port = port
        self._secure = secure
        self.legacy_recv = legacy_recv

        # Configure read buffer limits. The high-water limit is defined by
        # ``self.read_limit``. The ``limit`` argument controls the line length
        # limit and half the buffer limit of :class:`~asyncio.StreamReader`.
        # That's why it must be set to half of ``self.read_limit``.
        self.reader = asyncio.StreamReader(limit=read_limit // 2, loop=loop)

        # Copied from asyncio.FlowControlMixin
        self._paused = False
        self._drain_waiter: asyncio.Future[None] | None = None

        # This class implements the data transfer and closing handshake, which
        # are shared between the client-side and the server-side.
        # Subclasses implement the opening handshake and, on success, execute
        # :meth:`connection_open` to change the state to OPEN.
        self.state = State.CONNECTING
        if self.debug:
            self.logger.debug("= connection is CONNECTING")

        # HTTP protocol parameters.
        self.path: str
        """Path of the opening handshake request."""
        self.request_headers: Headers
        """Opening handshake request headers."""
        self.response_headers: Headers
        """Opening handshake response headers."""

        # WebSocket protocol parameters.
        self.extensions: list[Extension] = []
        self.subprotocol: Subprotocol | None = None
        """Subprotocol, if one was negotiated."""

        # Close code and reason, set when a close frame is sent or received.
        self.close_rcvd: Close | None = None
        self.close_sent: Close | None = None
        self.close_rcvd_then_sent: bool | None = None

        # Completed when the connection state becomes CLOSED. Translates the
        # :meth:`connection_lost` callback to a :class:`~asyncio.Future`
        # that can be awaited. (Other :class:`~asyncio.Protocol` callbacks are
        # translated by ``self.stream_reader``).
        self.connection_lost_waiter: asyncio.Future[None] = loop.create_future()

        # Queue of received messages.
        self.messages: Deque[Data] = collections.deque()
        self._pop_message_waiter: asyncio.Future[None] | None = None
        self._put_message_waiter: asyncio.Future[None] | None = None

        # Protect sending fragmented messages.
        self._fragmented_message_waiter: asyncio.Future[None] | None = None

        # Mapping of ping IDs to pong waiters, in chronological order.
        self.pings: dict[bytes, tuple[asyncio.Future[float], float]] = {}

        self.latency: float = 0
        """
        Latency of the connection, in seconds.

        Latency is defined as the round-trip time of the connection. It is
        measured by sending a Ping frame and waiting for a matching Pong frame.
        Before the first measurement, :attr:`latency` is ``0``.

        By default, websockets enables a :ref:`keepalive <keepalive>` mechanism
        that sends Ping frames automatically at regular intervals. You can also
        send Ping frames and measure latency with :meth:`ping`.
        """

        # Task running the data transfer.
        self.transfer_data_task: asyncio.Task[None]

        # Exception that occurred during data transfer, if any.
        self.transfer_data_exc: BaseException | None = None

        # Task sending keepalive pings.
        self.keepalive_ping_task: asyncio.Task[None]

        # Task closing the TCP connection.
        self.close_connection_task: asyncio.Task[None]

    # Copied from asyncio.FlowControlMixin
    async def _drain_helper(self) -> None:  # pragma: no cover
        if self.connection_lost_waiter.done():
            raise ConnectionResetError("Connection lost")
        if not self._paused:
            return
        waiter = self._drain_waiter
        assert waiter is None or waiter.cancelled()
        waiter = self.loop.create_future()
        self._drain_waiter = waiter
        await waiter

    # Copied from asyncio.StreamWriter
    async def _drain(self) -> None:  # pragma: no cover
        if self.reader is not None:
            exc = self.reader.exception()
            if exc is not None:
                raise exc
        if self.transport is not None:
            if self.transport.is_closing():
                # Yield to the event loop so connection_lost() may be
                # called.  Without this, _drain_helper() would return
                # immediately, and code that calls
                #     write(...); yield from drain()
                # in a loop would never call connection_lost(), so it
                # would not see an error when the socket is closed.
                await asyncio.sleep(0)
        await self._drain_helper()

    def connection_open(self) -> None:
        """
        Callback when the WebSocket opening handshake completes.

        Enter the OPEN state and start the data transfer phase.

        """
        # 4.1. The WebSocket Connection is Established.
        assert self.state is State.CONNECTING
        self.state = State.OPEN
        if self.debug:
            self.logger.debug("= connection is OPEN")
        # Start the task that receives incoming WebSocket messages.
        self.transfer_data_task = self.loop.create_task(self.transfer_data())
        # Start the task that sends pings at regular intervals.
        self.keepalive_ping_task = self.loop.create_task(self.keepalive_ping())
        # Start the task that eventually closes the TCP connection.
        self.close_connection_task = self.loop.create_task(self.close_connection())

    @property
    def host(self) -> str | None:
        alternative = "remote_address" if self.is_client else "local_address"
        warnings.warn(f"use {alternative}[0] instead of host", DeprecationWarning)
        return self._host

    @property
    def port(self) -> int | None:
        alternative = "remote_address" if self.is_client else "local_address"
        warnings.warn(f"use {alternative}[1] instead of port", DeprecationWarning)
        return self._port

    @property
    def secure(self) -> bool | None:
        warnings.warn("don't use secure", DeprecationWarning)
        return self._secure

    # Public API

    @property
    def local_address(self) -> Any:
        """
        Local address of the connection.

        For IPv4 connections, this is a ``(host, port)`` tuple.

        The format of the address depends on the address family;
        see :meth:`~socket.socket.getsockname`.

        :obj:`None` if the TCP connection isn't established yet.

        """
        try:
            transport = self.transport
        except AttributeError:
            return None
        else:
            return transport.get_extra_info("sockname")

    @property
    def remote_address(self) -> Any:
        """
        Remote address of the connection.

        For IPv4 connections, this is a ``(host, port)`` tuple.

        The format of the address depends on the address family;
        see :meth:`~socket.socket.getpeername`.

        :obj:`None` if the TCP connection isn't established yet.

        """
        try:
            transport = self.transport
        except AttributeError:
            return None
        else:
            return transport.get_extra_info("peername")

    @property
    def open(self) -> bool:
        """
        :obj:`True` when the connection is open; :obj:`False` otherwise.

        This attribute may be used to detect disconnections. However, this
        approach is discouraged per the EAFP_ principle. Instead, you should
        handle :exc:`~websockets.exceptions.ConnectionClosed` exceptions.

        .. _EAFP: https://docs.python.org/3/glossary.html#term-eafp

        """
        return self.state is State.OPEN and not self.transfer_data_task.done()

    @property
    def closed(self) -> bool:
        """
        :obj:`True` when the connection is closed; :obj:`False` otherwise.

        Be aware that both :attr:`open` and :attr:`closed` are :obj:`False`
        during the opening and closing sequences.

        """
        return self.state is State.CLOSED

    @property
    def close_code(self) -> int | None:
        """
        WebSocket close code, defined in `section 7.1.5 of RFC 6455`_.

        .. _section 7.1.5 of RFC 6455:
            https://datatracker.ietf.org/doc/html/rfc6455#section-7.1.5

        :obj:`None` if the connection isn't closed yet.

        """
        if self.state is not State.CLOSED:
            return None
        elif self.close_rcvd is None:
            return CloseCode.ABNORMAL_CLOSURE
        else:
            return self.close_rcvd.code

    @property
    def close_reason(self) -> str | None:
        """
        WebSocket close reason, defined in `section 7.1.6 of RFC 6455`_.

        .. _section 7.1.6 of RFC 6455:
            https://datatracker.ietf.org/doc/html/rfc6455#section-7.1.6

        :obj:`None` if the connection isn't closed yet.

        """
        if self.state is not State.CLOSED:
            return None
        elif self.close_rcvd is None:
            return ""
        else:
            return self.close_rcvd.reason

    async def __aiter__(self) -> AsyncIterator[Data]:
        """
        Iterate on incoming messages.

        The iterator exits normally when the connection is closed with the close
        code 1000 (OK) or 1001 (going away) or without a close code.

        It raises a :exc:`~websockets.exceptions.ConnectionClosedError`
        exception when the connection is closed with any other code.

        """
        try:
            while True:
                yield await self.recv()
        except ConnectionClosedOK:
            return

    async def recv(self) -> Data:
        """
        Receive the next message.

        When the connection is closed, :meth:`recv` raises
        :exc:`~websockets.exceptions.ConnectionClosed`. Specifically, it raises
        :exc:`~websockets.exceptions.ConnectionClosedOK` after a normal
        connection closure and
        :exc:`~websockets.exceptions.ConnectionClosedError` after a protocol
        error or a network failure. This is how you detect the end of the
        message stream.

        Canceling :meth:`recv` is safe. There's no risk of losing the next
        message. The next invocation of :meth:`recv` will return it.

        This makes it possible to enforce a timeout by wrapping :meth:`recv` in
        :func:`~asyncio.timeout` or :func:`~asyncio.wait_for`.

        Returns:
            A string (:class:`str`) for a Text_ frame. A bytestring
            (:class:`bytes`) for a Binary_ frame.

            .. _Text: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6
            .. _Binary: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6

        Raises:
            ConnectionClosed: When the connection is closed.
            RuntimeError: If two coroutines call :meth:`recv` concurrently.

        """
        if self._pop_message_waiter is not None:
            raise RuntimeError(
                "cannot call recv while another coroutine "
                "is already waiting for the next message"
            )

        # Don't await self.ensure_open() here:
        # - messages could be available in the queue even if the connection
        #   is closed;
        # - messages could be received before the closing frame even if the
        #   connection is closing.

        # Wait until there's a message in the queue (if necessary) or the
        # connection is closed.
        while len(self.messages) <= 0:
            pop_message_waiter: asyncio.Future[None] = self.loop.create_future()
            self._pop_message_waiter = pop_message_waiter
            try:
                # If asyncio.wait() is canceled, it doesn't cancel
                # pop_message_waiter and self.transfer_data_task.
                await asyncio.wait(
                    [pop_message_waiter, self.transfer_data_task],
                    return_when=asyncio.FIRST_COMPLETED,
                )
            finally:
                self._pop_message_waiter = None

            # If asyncio.wait(...) exited because self.transfer_data_task
            # completed before receiving a new message, raise a suitable
            # exception (or return None if legacy_recv is enabled).
            if not pop_message_waiter.done():
                if self.legacy_recv:
                    return None  # type: ignore
                else:
                    # Wait until the connection is closed to raise
                    # ConnectionClosed with the correct code and reason.
                    await self.ensure_open()

        # Pop a message from the queue.
        message = self.messages.popleft()

        # Notify transfer_data().
        if self._put_message_waiter is not None:
            self._put_message_waiter.set_result(None)
            self._put_message_waiter = None

        return message

    async def send(
        self,
        message: DataLike | Iterable[DataLike] | AsyncIterable[DataLike],
    ) -> None:
        """
        Send a message.

        A string (:class:`str`) is sent as a Text_ frame. A bytestring or
        bytes-like object (:class:`bytes`, :class:`bytearray`, or
        :class:`memoryview`) is sent as a Binary_ frame.

        .. _Text: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6
        .. _Binary: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6

        :meth:`send` also accepts an iterable or an asynchronous iterable of
        strings, bytestrings, or bytes-like objects to enable fragmentation_.
        Each item is treated as a message fragment and sent in its own frame.
        All items must be of the same type, or else :meth:`send` will raise a
        :exc:`TypeError` and the connection will be closed.

        .. _fragmentation: https://datatracker.ietf.org/doc/html/rfc6455#section-5.4

        :meth:`send` rejects dict-like objects because this is often an error.
        (If you want to send the keys of a dict-like object as fragments, call
        its :meth:`~dict.keys` method and pass the result to :meth:`send`.)

        Canceling :meth:`send` is discouraged. Instead, you should close the
        connection with :meth:`close`. Indeed, there are only two situations
        where :meth:`send` may yield control to the event loop and then get
        canceled; in both cases, :meth:`close` has the same effect and is
        more clear:

        1. The write buffer is full. If you don't want to wait until enough
           data is sent, your only alternative is to close the connection.
           :meth:`close` will likely time out then abort the TCP connection.
        2. ``message`` is an asynchronous iterator that yields control.
           Stopping in the middle of a fragmented message will cause a
           protocol error and the connection will be closed.

        When the connection is closed, :meth:`send` raises
        :exc:`~websockets.exceptions.ConnectionClosed`. Specifically, it
        raises :exc:`~websockets.exceptions.ConnectionClosedOK` after a normal
        connection closure and
        :exc:`~websockets.exceptions.ConnectionClosedError` after a protocol
        error or a network failure.

        Args:
            message: Message to send.

        Raises:
            ConnectionClosed: When the connection is closed.
            TypeError: If ``message`` doesn't have a supported type.

        """
        await self.ensure_open()

        # While sending a fragmented message, prevent sending other messages
        # until all fragments are sent.
        while self._fragmented_message_waiter is not None:
            await asyncio.shield(self._fragmented_message_waiter)

        # Unfragmented message — this case must be handled first because
        # strings and bytes-like objects are iterable.

        if isinstance(message, (str, bytes, bytearray, memoryview)):
            opcode, data = prepare_data(message)
            await self.write_frame(True, opcode, data)

        # Catch a common mistake — passing a dict to send().

        elif isinstance(message, Mapping):
            raise TypeError("data is a dict-like object")

        # Fragmented message — regular iterator.

        elif isinstance(message, Iterable):
            iter_message = iter(message)
            try:
                fragment = next(iter_message)
            except StopIteration:
                return
            opcode, data = prepare_data(fragment)

            self._fragmented_message_waiter = self.loop.create_future()
            try:
                # First fragment.
                await self.write_frame(False, opcode, data)

                # Other fragments.
                for fragment in iter_message:
                    confirm_opcode, data = prepare_data(fragment)
                    if confirm_opcode != opcode:
                        raise TypeError("data contains inconsistent types")
                    await self.write_frame(False, OP_CONT, data)

                # Final fragment.
                await self.write_frame(True, OP_CONT, b"")

            except (Exception, asyncio.CancelledError):
                # We're half-way through a fragmented message and we can't
                # complete it. This makes the connection unusable.
                self.fail_connection(CloseCode.INTERNAL_ERROR)
                raise

            finally:
                self._fragmented_message_waiter.set_result(None)
                self._fragmented_message_waiter = None

        # Fragmented message — asynchronous iterator

        elif isinstance(message, AsyncIterable):
            # Implement aiter_message = aiter(message) without aiter
            # Work around https://github.com/python/mypy/issues/5738
            aiter_message = cast(
                Callable[[AsyncIterable[DataLike]], AsyncIterator[DataLike]],
                type(message).__aiter__,
            )(message)
            try:
                # Implement fragment = anext(aiter_message) without anext
                # Work around https://github.com/python/mypy/issues/5738
                fragment = await cast(
                    Callable[[AsyncIterator[DataLike]], Awaitable[DataLike]],
                    type(aiter_message).__anext__,
                )(aiter_message)
            except StopAsyncIteration:
                return
            opcode, data = prepare_data(fragment)

            self._fragmented_message_waiter = self.loop.create_future()
            try:
                # First fragment.
                await self.write_frame(False, opcode, data)

                # Other fragments.
                async for fragment in aiter_message:
                    confirm_opcode, data = prepare_data(fragment)
                    if confirm_opcode != opcode:
                        raise TypeError("data contains inconsistent types")
                    await self.write_frame(False, OP_CONT, data)

                # Final fragment.
                await self.write_frame(True, OP_CONT, b"")

            except (Exception, asyncio.CancelledError):
                # We're half-way through a fragmented message and we can't
                # complete it. This makes the connection unusable.
                self.fail_connection(CloseCode.INTERNAL_ERROR)
                raise

            finally:
                self._fragmented_message_waiter.set_result(None)
                self._fragmented_message_waiter = None

        else:
            raise TypeError("data must be str, bytes-like, or iterable")

    async def close(
        self,
        code: int = CloseCode.NORMAL_CLOSURE,
        reason: str = "",
    ) -> None:
        """
        Perform the closing handshake.

        :meth:`close` waits for the other end to complete the handshake and
        for the TCP connection to terminate. As a consequence, there's no need
        to await :meth:`wait_closed` after :meth:`close`.

        :meth:`close` is idempotent: it doesn't do anything once the
        connection is closed.

        Wrapping :func:`close` in :func:`~asyncio.create_task` is safe, given
        that errors during connection termination aren't particularly useful.

        Canceling :meth:`close` is discouraged. If it takes too long, you can
        set a shorter ``close_timeout``. If you don't want to wait, let the
        Python process exit, then the OS will take care of closing the TCP
        connection.

        Args:
            code: WebSocket close code.
            reason: WebSocket close reason.

        """
        try:
            async with asyncio.timeout(self.close_timeout):
                await self.write_close_frame(Close(code, reason))
        except asyncio.TimeoutError:
            # If the close frame cannot be sent because the send buffers
            # are full, the closing handshake won't complete anyway.
            # Fail the connection to shut down faster.
            self.fail_connection()

        # If no close frame is received within the timeout, asyncio.timeout()
        # cancels the data transfer task and raises TimeoutError.

        # If close() is called multiple times concurrently and one of these
        # calls hits the timeout, the data transfer task will be canceled.
        # Other calls will receive a CancelledError here.

        try:
            # If close() is canceled during the wait, self.transfer_data_task
            # is canceled before the timeout elapses.
            async with asyncio.timeout(self.close_timeout):
                await self.transfer_data_task
        except (asyncio.TimeoutError, asyncio.CancelledError):
            pass

        # Wait for the close connection task to close the TCP connection.
        await asyncio.shield(self.close_connection_task)

    async def wait_closed(self) -> None:
        """
        Wait until the connection is closed.

        This coroutine is identical to the :attr:`closed` attribute, except it
        can be awaited.

        This can make it easier to detect connection termination, regardless
        of its cause, in tasks that interact with the WebSocket connection.

        """
        await asyncio.shield(self.connection_lost_waiter)

    async def ping(self, data: DataLike | None = None) -> Awaitable[float]:
        """
        Send a Ping_.

        .. _Ping: https://datatracker.ietf.org/doc/html/rfc6455#section-5.5.2

        A ping may serve as a keepalive, as a check that the remote endpoint
        received all messages up to this point, or to measure :attr:`latency`.

        Canceling :meth:`ping` is discouraged. If :meth:`ping` doesn't return
        immediately, it means the write buffer is full. If you don't want to
        wait, you should close the connection.

        Canceling the :class:`~asyncio.Future` returned by :meth:`ping` has no
        effect.

        Args:
            data: Payload of the ping. A string will be encoded to UTF-8.
                If ``data`` is :obj:`None`, the payload is four random bytes.

        Returns:
            A future that will be completed when the corresponding pong is
            received. You can ignore it if you don't intend to wait. The result
            of the future is the latency of the connection in seconds.

            ::

                pong_waiter = await ws.ping()
                # only if you want to wait for the corresponding pong
                latency = await pong_waiter

        Raises:
            ConnectionClosed: When the connection is closed.
            RuntimeError: If another ping was sent with the same data and
                the corresponding pong wasn't received yet.

        """
        await self.ensure_open()

        if data is not None:
            data = prepare_ctrl(data)

        # Protect against duplicates if a payload is explicitly set.
        if data in self.pings:
            raise RuntimeError("already waiting for a pong with the same data")

        # Generate a unique random payload otherwise.
        while data is None or data in self.pings:
            data = struct.pack("!I", random.getrandbits(32))

        pong_waiter = self.loop.create_future()
        # Resolution of time.monotonic() may be too low on Windows.
        ping_timestamp = time.perf_counter()
        self.pings[data] = (pong_waiter, ping_timestamp)

        await self.write_frame(True, OP_PING, data)

        return asyncio.shield(pong_waiter)

    async def pong(self, data: DataLike = b"") -> None:
        """
        Send a Pong_.

        .. _Pong: https://datatracker.ietf.org/doc/html/rfc6455#section-5.5.3

        An unsolicited pong may serve as a unidirectional heartbeat.

        Canceling :meth:`pong` is discouraged. If :meth:`pong` doesn't return
        immediately, it means the write buffer is full. If you don't want to
        wait, you should close the connection.

        Args:
            data: Payload of the pong. A string will be encoded to UTF-8.

        Raises:
            ConnectionClosed: When the connection is closed.

        """
        await self.ensure_open()

        data = prepare_ctrl(data)

        await self.write_frame(True, OP_PONG, data)

    # Private methods - no guarantees.

    def connection_closed_exc(self) -> ConnectionClosed:
        exc: ConnectionClosed
        if (
            self.close_rcvd is not None
            and self.close_rcvd.code in OK_CLOSE_CODES
            and self.close_sent is not None
            and self.close_sent.code in OK_CLOSE_CODES
        ):
            exc = ConnectionClosedOK(
                self.close_rcvd,
                self.close_sent,
                self.close_rcvd_then_sent,
            )
        else:
            exc = ConnectionClosedError(
                self.close_rcvd,
                self.close_sent,
                self.close_rcvd_then_sent,
            )
        # Chain to the exception that terminated data transfer, if any.
        exc.__cause__ = self.transfer_data_exc
        return exc

    async def ensure_open(self) -> None:
        """
        Check that the WebSocket connection is open.

        Raise :exc:`~websockets.exceptions.ConnectionClosed` if it isn't.

        """
        # Handle cases from most common to least common for performance.
        if self.state is State.OPEN:
            # If self.transfer_data_task exited without a closing handshake,
            # self.close_connection_task may be closing the connection, going
            # straight from OPEN to CLOSED.
            if self.transfer_data_task.done():
                await asyncio.shield(self.close_connection_task)
                raise self.connection_closed_exc()
            else:
                return

        if self.state is State.CLOSED:
            raise self.connection_closed_exc()

        if self.state is State.CLOSING:
            # If we started the closing handshake, wait for its completion to
            # get the proper close code and reason. self.close_connection_task
            # will complete within 4 or 5 * close_timeout after close(). The
            # CLOSING state also occurs when failing the connection. In that
            # case self.close_connection_task will complete even faster.
            await asyncio.shield(self.close_connection_task)
            raise self.connection_closed_exc()

        # Control may only reach this point in buggy third-party subclasses.
        assert self.state is State.CONNECTING
        raise InvalidState("WebSocket connection isn't established yet")

    async def transfer_data(self) -> None:
        """
        Read incoming messages and put them in a queue.

        This coroutine runs in a task until the closing handshake is started.

        """
        try:
            while True:
                message = await self.read_message()

                # Exit the loop when receiving a close frame.
                if message is None:
                    break

                # Wait until there's room in the queue (if necessary).
                if self.max_queue is not None:
                    while len(self.messages) >= self.max_queue:
                        self._put_message_waiter = self.loop.create_future()
                        try:
                            await asyncio.shield(self._put_message_waiter)
                        finally:
                            self._put_message_waiter = None

                # Put the message in the queue.
                self.messages.append(message)

                # Notify recv().
                if self._pop_message_waiter is not None:
                    self._pop_message_waiter.set_result(None)
                    self._pop_message_waiter = None

        except asyncio.CancelledError as exc:
            self.transfer_data_exc = exc
            # If fail_connection() cancels this task, avoid logging the error
            # twice and failing the connection again.
            raise

        except ProtocolError as exc:
            self.transfer_data_exc = exc
            self.fail_connection(CloseCode.PROTOCOL_ERROR)

        except (ConnectionError, TimeoutError, EOFError, ssl.SSLError) as exc:
            # Reading data with self.reader.readexactly may raise:
            # - most subclasses of ConnectionError if the TCP connection
            #   breaks, is reset, or is aborted;
            # - TimeoutError if the TCP connection times out;
            # - IncompleteReadError, a subclass of EOFError, if fewer
            #   bytes are available than requested;
            # - ssl.SSLError if the other side infringes the TLS protocol.
            self.transfer_data_exc = exc
            self.fail_connection(CloseCode.ABNORMAL_CLOSURE)

        except UnicodeDecodeError as exc:
            self.transfer_data_exc = exc
            self.fail_connection(CloseCode.INVALID_DATA)

        except PayloadTooBig as exc:
            self.transfer_data_exc = exc
            self.fail_connection(CloseCode.MESSAGE_TOO_BIG)

        except Exception as exc:
            # This shouldn't happen often because exceptions expected under
            # regular circumstances are handled above. If it does, consider
            # catching and handling more exceptions.
            self.logger.error("data transfer failed", exc_info=True)

            self.transfer_data_exc = exc
            self.fail_connection(CloseCode.INTERNAL_ERROR)

    async def read_message(self) -> Data | None:
        """
        Read a single message from the connection.

        Re-assemble data frames if the message is fragmented.

        Return :obj:`None` when the closing handshake is started.

        """
        frame = await self.read_data_frame(max_size=self.max_size)

        # A close frame was received.
        if frame is None:
            return None

        if frame.opcode == OP_TEXT:
            text = True
        elif frame.opcode == OP_BINARY:
            text = False
        else:  # frame.opcode == OP_CONT
            raise ProtocolError("unexpected opcode")

        # Shortcut for the common case - no fragmentation
        if frame.fin:
            if isinstance(frame.data, memoryview):
                raise AssertionError("only compressed outgoing frames use memoryview")
            return frame.data.decode() if text else bytes(frame.data)

        # 5.4. Fragmentation
        fragments: list[DataLike] = []
        max_size = self.max_size
        if text:
            decoder_factory = codecs.getincrementaldecoder("utf-8")
            decoder = decoder_factory(errors="strict")
            if max_size is None:

                def append(frame: Frame) -> None:
                    nonlocal fragments
                    fragments.append(decoder.decode(frame.data, frame.fin))

            else:

                def append(frame: Frame) -> None:
                    nonlocal fragments, max_size
                    fragments.append(decoder.decode(frame.data, frame.fin))
                    assert isinstance(max_size, int)
                    max_size -= len(frame.data)

        else:
            if max_size is None:

                def append(frame: Frame) -> None:
                    nonlocal fragments
                    fragments.append(frame.data)

            else:

                def append(frame: Frame) -> None:
                    nonlocal fragments, max_size
                    fragments.append(frame.data)
                    assert isinstance(max_size, int)
                    max_size -= len(frame.data)

        append(frame)

        while not frame.fin:
            frame = await self.read_data_frame(max_size=max_size)
            if frame is None:
                raise ProtocolError("incomplete fragmented message")
            if frame.opcode != OP_CONT:
                raise ProtocolError("unexpected opcode")
            append(frame)

        return ("" if text else b"").join(fragments)

    async def read_data_frame(self, max_size: int | None) -> Frame | None:
        """
        Read a single data frame from the connection.

        Process control frames received before the next data frame.

        Return :obj:`None` if a close frame is encountered before any data frame.

        """
        # 6.2. Receiving Data
        while True:
            frame = await self.read_frame(max_size)

            # 5.5. Control Frames
            if frame.opcode == OP_CLOSE:
                # 7.1.5.  The WebSocket Connection Close Code
                # 7.1.6.  The WebSocket Connection Close Reason
                self.close_rcvd = Close.parse(frame.data)
                if self.close_sent is not None:
                    self.close_rcvd_then_sent = False
                try:
                    # Echo the original data instead of re-serializing it with
                    # Close.serialize() because that fails when the close frame
                    # is empty and Close.parse() synthesizes a 1005 close code.
                    await self.write_close_frame(self.close_rcvd, frame.data)
                except ConnectionClosed:
                    # Connection closed before we could echo the close frame.
                    pass
                return None

            elif frame.opcode == OP_PING:
                # Answer pings, unless connection is CLOSING.
                if self.state is State.OPEN:
                    try:
                        await self.pong(frame.data)
                    except ConnectionClosed:
                        # Connection closed while draining write buffer.
                        pass

            elif frame.opcode == OP_PONG:
                if frame.data in self.pings:
                    pong_timestamp = time.perf_counter()
                    # Sending a pong for only the most recent ping is legal.
                    # Acknowledge all previous pings too in that case.
                    ping_id = None
                    ping_ids = []
                    for ping_id, (pong_waiter, ping_timestamp) in self.pings.items():
                        ping_ids.append(ping_id)
                        if not pong_waiter.done():
                            pong_waiter.set_result(pong_timestamp - ping_timestamp)
                        if ping_id == frame.data:
                            self.latency = pong_timestamp - ping_timestamp
                            break
                    else:
                        raise AssertionError("solicited pong not found in pings")
                    # Remove acknowledged pings from self.pings.
                    for ping_id in ping_ids:
                        del self.pings[ping_id]

            # 5.6. Data Frames
            else:
                return frame

    async def read_frame(self, max_size: int | None) -> Frame:
        """
        Read a single frame from the connection.

        """
        frame = await Frame.read(
            self.reader.readexactly,
            mask=not self.is_client,
            max_size=max_size,
            extensions=self.extensions,
        )
        if self.debug:
            self.logger.debug("< %s", frame)
        return frame

    def write_frame_sync(self, fin: bool, opcode: int, data: BytesLike) -> None:
        frame = Frame(fin, Opcode(opcode), data)
        if self.debug:
            self.logger.debug("> %s", frame)
        frame.write(
            self.transport.write,
            mask=self.is_client,
            extensions=self.extensions,
        )

    async def drain(self) -> None:
        try:
            # Handle flow control automatically.
            await self._drain()
        except ConnectionError:
            # Terminate the connection if the socket died.
            self.fail_connection()
            # Wait until the connection is closed to raise ConnectionClosed
            # with the correct code and reason.
            await self.ensure_open()

    async def write_frame(
        self, fin: bool, opcode: int, data: BytesLike, *, _state: int = State.OPEN
    ) -> None:
        # Defensive assertion for protocol compliance.
        if self.state is not _state:  # pragma: no cover
            raise InvalidState(
                f"Cannot write to a WebSocket in the {self.state.name} state"
            )
        self.write_frame_sync(fin, opcode, data)
        await self.drain()

    async def write_close_frame(
        self, close: Close, data: BytesLike | None = None
    ) -> None:
        """
        Write a close frame if and only if the connection state is OPEN.

        This dedicated coroutine must be used for writing close frames to
        ensure that at most one close frame is sent on a given connection.

        """
        # Test and set the connection state before sending the close frame to
        # avoid sending two frames in case of concurrent calls.
        if self.state is State.OPEN:
            # 7.1.3. The WebSocket Closing Handshake is Started
            self.state = State.CLOSING
            if self.debug:
                self.logger.debug("= connection is CLOSING")

            self.close_sent = close
            if self.close_rcvd is not None:
                self.close_rcvd_then_sent = True
            if data is None:
                data = close.serialize()

            # 7.1.2. Start the WebSocket Closing Handshake
            await self.write_frame(True, OP_CLOSE, data, _state=State.CLOSING)

    async def keepalive_ping(self) -> None:
        """
        Send a Ping frame and wait for a Pong frame at regular intervals.

        This coroutine exits when the connection terminates and one of the
        following happens:

        - :meth:`ping` raises :exc:`ConnectionClosed`, or
        - :meth:`close_connection` cancels :attr:`keepalive_ping_task`.

        """
        if self.ping_interval is None:
            return

        try:
            while True:
                await asyncio.sleep(self.ping_interval)

                if self.debug:
                    self.logger.debug("% sending keepalive ping")
                pong_waiter = await self.ping()

                if self.ping_timeout is not None:
                    try:
                        async with asyncio.timeout(self.ping_timeout):
                            # Raises CancelledError if the connection is closed,
                            # when close_connection() cancels keepalive_ping().
                            # Raises ConnectionClosed if the connection is lost,
                            # when connection_lost() calls abort_pings().
                            await pong_waiter
                        if self.debug:
                            self.logger.debug("% received keepalive pong")
                    except asyncio.TimeoutError:
                        if self.debug:
                            self.logger.debug("- timed out waiting for keepalive pong")
                        self.fail_connection(
                            CloseCode.INTERNAL_ERROR,
                            "keepalive ping timeout",
                        )
                        break

        except ConnectionClosed:
            pass

        except Exception:
            self.logger.error("keepalive ping failed", exc_info=True)

    async def close_connection(self) -> None:
        """
        7.1.1. Close the WebSocket Connection

        When the opening handshake succeeds, :meth:`connection_open` starts
        this coroutine in a task. It waits for the data transfer phase to
        complete then it closes the TCP connection cleanly.

        When the opening handshake fails, :meth:`fail_connection` does the
        same. There's no data transfer phase in that case.

        """
        try:
            # Wait for the data transfer phase to complete.
            if hasattr(self, "transfer_data_task"):
                try:
                    await self.transfer_data_task
                except asyncio.CancelledError:
                    pass

            # Cancel the keepalive ping task.
            if hasattr(self, "keepalive_ping_task"):
                self.keepalive_ping_task.cancel()
                # Break reference cycle to allow immediate garbage collection.
                del self.keepalive_ping_task

            # A client should wait for a TCP close from the server.
            if self.is_client and hasattr(self, "transfer_data_task"):
                if await self.wait_for_connection_lost():
                    return
                if self.debug:
                    self.logger.debug("- timed out waiting for TCP close")

            # Half-close the TCP connection if possible (when there's no TLS).
            if self.transport.can_write_eof():
                if self.debug:
                    self.logger.debug("x half-closing TCP connection")
                # write_eof() doesn't document which exceptions it raises.
                # "[Errno 107] Transport endpoint is not connected" happens
                # but it isn't completely clear under which circumstances.
                # uvloop can raise RuntimeError here.
                try:
                    self.transport.write_eof()
                except (OSError, RuntimeError):  # pragma: no cover
                    pass

                if await self.wait_for_connection_lost():
                    return
                if self.debug:
                    self.logger.debug("- timed out waiting for TCP close")

        finally:
            # The try/finally ensures that the transport never remains open,
            # even if this coroutine is canceled (for example).
            await self.close_transport()

    async def close_transport(self) -> None:
        """
        Close the TCP connection.

        """
        # If connection_lost() was called, the TCP connection is closed.
        # However, if TLS is enabled, the transport still needs closing.
        # Else asyncio complains: ResourceWarning: unclosed transport.
        if self.connection_lost_waiter.done() and self.transport.is_closing():
            return

        # Close the TCP connection. Buffers are flushed asynchronously.
        if self.debug:
            self.logger.debug("x closing TCP connection")
        self.transport.close()

        if await self.wait_for_connection_lost():
            return
        if self.debug:
            self.logger.debug("- timed out waiting for TCP close")

        # Abort the TCP connection. Buffers are discarded.
        if self.debug:
            self.logger.debug("x aborting TCP connection")
        self.transport.abort()

        # connection_lost() is called quickly after aborting.
        await self.wait_for_connection_lost()

    async def wait_for_connection_lost(self) -> bool:
        """
        Wait until the TCP connection is closed or ``self.close_timeout`` elapses.

        Return :obj:`True` if the connection is closed and :obj:`False`
        otherwise.

        """
        if not self.connection_lost_waiter.done():
            try:
                async with asyncio.timeout(self.close_timeout):
                    await asyncio.shield(self.connection_lost_waiter)
            except asyncio.TimeoutError:
                pass
        # Re-check self.connection_lost_waiter.done() synchronously because
        # connection_lost() could run between the moment the timeout occurs
        # and the moment this coroutine resumes running.
        return self.connection_lost_waiter.done()

    def fail_connection(
        self,
        code: int = CloseCode.ABNORMAL_CLOSURE,
        reason: str = "",
    ) -> None:
        """
        7.1.7. Fail the WebSocket Connection

        This requires:

        1. Stopping all processing of incoming data, which means canceling
           :attr:`transfer_data_task`. The close code will be 1006 unless a
           close frame was received earlier.

        2. Sending a close frame with an appropriate code if the opening
           handshake succeeded and the other side is likely to process it.

        3. Closing the connection. :meth:`close_connection` takes care of
           this once :attr:`transfer_data_task` exits after being canceled.

        (The specification describes these steps in the opposite order.)

        """
        if self.debug:
            self.logger.debug("! failing connection with code %d", code)

        # Cancel transfer_data_task if the opening handshake succeeded.
        # cancel() is idempotent and ignored if the task is done already.
        if hasattr(self, "transfer_data_task"):
            self.transfer_data_task.cancel()

        # Send a close frame when the state is OPEN (a close frame was already
        # sent if it's CLOSING), except when failing the connection because of
        # an error reading from or writing to the network.
        # Don't send a close frame if the connection is broken.
        if code != CloseCode.ABNORMAL_CLOSURE and self.state is State.OPEN:
            close = Close(code, reason)

            # Write the close frame without draining the write buffer.

            # Keeping fail_connection() synchronous guarantees it can't
            # get stuck and simplifies the implementation of the callers.
            # Not drainig the write buffer is acceptable in this context.

            # This duplicates a few lines of code from write_close_frame().

            self.state = State.CLOSING
            if self.debug:
                self.logger.debug("= connection is CLOSING")

            # If self.close_rcvd was set, the connection state would be
            # CLOSING. Therefore self.close_rcvd isn't set and we don't
            # have to set self.close_rcvd_then_sent.
            assert self.close_rcvd is None
            self.close_sent = close

            self.write_frame_sync(True, OP_CLOSE, close.serialize())

        # Start close_connection_task if the opening handshake didn't succeed.
        if not hasattr(self, "close_connection_task"):
            self.close_connection_task = self.loop.create_task(self.close_connection())

    def abort_pings(self) -> None:
        """
        Raise ConnectionClosed in pending keepalive pings.

        They'll never receive a pong once the connection is closed.

        """
        assert self.state is State.CLOSED
        exc = self.connection_closed_exc()

        for pong_waiter, _ping_timestamp in self.pings.values():
            pong_waiter.set_exception(exc)
            # If the exception is never retrieved, it will be logged when ping
            # is garbage-collected. This is confusing for users.
            # Given that ping is done (with an exception), canceling it does
            # nothing, but it prevents logging the exception.
            pong_waiter.cancel()

    # asyncio.Protocol methods

    def connection_made(self, transport: asyncio.BaseTransport) -> None:
        """
        Configure write buffer limits.

        The high-water limit is defined by ``self.write_limit``.

        The low-water limit currently defaults to ``self.write_limit // 4`` in
        :meth:`~asyncio.WriteTransport.set_write_buffer_limits`, which should
        be all right for reasonable use cases of this library.

        This is the earliest point where we can get hold of the transport,
        which means it's the best point for configuring it.

        """
        transport = cast(asyncio.Transport, transport)
        transport.set_write_buffer_limits(self.write_limit)
        self.transport = transport

        # Copied from asyncio.StreamReaderProtocol
        self.reader.set_transport(transport)

    def connection_lost(self, exc: Exception | None) -> None:
        """
        7.1.4. The WebSocket Connection is Closed.

        """
        self.state = State.CLOSED
        if self.debug:
            self.logger.debug("= connection is CLOSED")

        self.abort_pings()

        # If self.connection_lost_waiter isn't pending, that's a bug, because:
        # - it's set only here in connection_lost() which is called only once;
        # - it must never be canceled.
        self.connection_lost_waiter.set_result(None)

        if True:  # pragma: no cover
            # Copied from asyncio.StreamReaderProtocol
            if self.reader is not None:
                if exc is None:
                    self.reader.feed_eof()
                else:
                    self.reader.set_exception(exc)

            # Copied from asyncio.FlowControlMixin
            # Wake up the writer if currently paused.
            if not self._paused:
                return
            waiter = self._drain_waiter
            if waiter is None:
                return
            self._drain_waiter = None
            if waiter.done():
                return
            if exc is None:
                waiter.set_result(None)
            else:
                waiter.set_exception(exc)

    def pause_writing(self) -> None:  # pragma: no cover
        assert not self._paused
        self._paused = True

    def resume_writing(self) -> None:  # pragma: no cover
        assert self._paused
        self._paused = False

        waiter = self._drain_waiter
        if waiter is not None:
            self._drain_waiter = None
            if not waiter.done():
                waiter.set_result(None)

    def data_received(self, data: bytes) -> None:
        self.reader.feed_data(data)

    def eof_received(self) -> None:
        """
        Close the transport after receiving EOF.

        The WebSocket protocol has its own closing handshake: endpoints close
        the TCP or TLS connection after sending and receiving a close frame.

        As a consequence, they never need to write after receiving EOF, so
        there's no reason to keep the transport open by returning :obj:`True`.

        Besides, that doesn't work on TLS connections.

        """
        self.reader.feed_eof()


# broadcast() is defined in the protocol module even though it's primarily
# used by servers and documented in the server module because it works with
# client connections too and because it's easier to test together with the
# WebSocketCommonProtocol class.


def broadcast(
    websockets: Iterable[WebSocketCommonProtocol],
    message: DataLike,
    raise_exceptions: bool = False,
) -> None:
    """
    Broadcast a message to several WebSocket connections.

    A string (:class:`str`) is sent as a Text_ frame. A bytestring or bytes-like
    object (:class:`bytes`, :class:`bytearray`, or :class:`memoryview`) is sent
    as a Binary_ frame.

    .. _Text: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6
    .. _Binary: https://datatracker.ietf.org/doc/html/rfc6455#section-5.6

    :func:`broadcast` pushes the message synchronously to all connections even
    if their write buffers are overflowing. There's no backpressure.

    If you broadcast messages faster than a connection can handle them, messages
    will pile up in its write buffer until the connection times out. Keep
    ``ping_interval`` and ``ping_timeout`` low to prevent excessive memory usage
    from slow connections.

    Unlike :meth:`~websockets.legacy.protocol.WebSocketCommonProtocol.send`,
    :func:`broadcast` doesn't support sending fragmented messages. Indeed,
    fragmentation is useful for sending large messages without buffering them in
    memory, while :func:`broadcast` buffers one copy per connection as fast as
    possible.

    :func:`broadcast` skips connections that aren't open in order to avoid
    errors on connections where the closing handshake is in progress.

    :func:`broadcast` ignores failures to write the message on some connections.
    It continues writing to other connections. You may set ``raise_exceptions``
    to :obj:`True` to record failures and raise all exceptions in a :pep:`654`
    :exc:`ExceptionGroup`.

    While :func:`broadcast` makes more sense for servers, it works identically
    with clients, if you have a use case for opening connections to many servers
    and broadcasting a message to them.

    Args:
        websockets: WebSocket connections to which the message will be sent.
        message: Message to send.
        raise_exceptions: Whether to raise an exception in case of failures.

    Raises:
        TypeError: If ``message`` doesn't have a supported type.

    """
    if not isinstance(message, (str, bytes, bytearray, memoryview)):
        raise TypeError("data must be str or bytes-like")

    if raise_exceptions:
        exceptions = []

    opcode, data = prepare_data(message)

    for websocket in websockets:
        if websocket.state is not State.OPEN:
            continue

        if websocket._fragmented_message_waiter is not None:
            if raise_exceptions:
                exception = RuntimeError("sending a fragmented message")
                exceptions.append(exception)
            else:
                websocket.logger.warning(
                    "skipped broadcast: sending a fragmented message",
                )
            continue

        try:
            websocket.write_frame_sync(True, opcode, data)
        except Exception as write_exception:
            if raise_exceptions:
                exception = RuntimeError("failed to write message")
                exception.__cause__ = write_exception
                exceptions.append(exception)
            else:
                websocket.logger.warning(
                    "skipped broadcast: failed to write message: %s",
                    traceback.format_exception_only(write_exception)[0].strip(),
                )

    if raise_exceptions and exceptions:
        raise ExceptionGroup("skipped broadcast", exceptions)


# Pretend that broadcast is actually defined in the server module.
broadcast.__module__ = "websockets.legacy.server"