guanlan-src/app_ETL/configs/contracts/gup_up2000_hongyang.yaml

# 数据契约 — 国电联合动力 GUP UP2000 2MW DFIG (红阳, 贵州大唐)
# 复用基 = gup_up2000_fengxiang.yaml (联合动力同OEM); 本场 §1.2 实证 override (2026-07-08, A03 proof)
# ⚠ 草案: 待 contract_lint(CT-1) + validate_contract(CT-2) 过门
meta:
  oem: 国电联合动力 GUP
  model: UP2000 2MW (机型/叶轮径 待收资表确认)
  topology: dfig_geared
  rated_kw: 2000
  source_farm: 红阳 (贵州大唐)
  reuse_base: gup_up2000_fengxiang.yaml (语义/陷阱复用; 单位/新通道本场重验)
  layout:
    format: "<tid>.csv (A03..A26); 2表头行(中文名/英文码) + rows: 时间,值...19列"
    time_format: "YYYY-MM-DD HH:MM:SS"
  sampling:
    layers: "10min(15台/2023.04-2024.04 满12月≈100%密度) / 秒级(1台 EEE2539_202405)"
    caveat: "10min 满窗(优于枫香26%); 秒级仅单台单月"

# ---- 机组 SCADA (raw 列名 = 英文码; §1.2 A03 实证) ----
turbine:
  required: [UNIT.CI_PcsActivePower, UNIT.CI_WindSpeed1, SCADAUSE.CI_RotorSpeed]
  columns:
    UNIT.CI_PcsActivePower:            # 变频器有功 (主功率)
      canonical_id: WAPC_active_power
      raw_unit: W                      # ✅实证 max 2184600 → W
      to_canonical: "/1000"
      valid_range_canonical: [-100, 2200]
      block_if_raw_exceeds: 50000
    UNIT.CI_IprRealPower:              # 电能质量模块检测有功 (交叉核)
      canonical_id: WAPC_active_power_pq
      raw_unit: W
      to_canonical: "/1000"
      note: "与 PcsActivePower 交叉验; 择一作达成率分子, 声明口径"
    SCADAUSE.CI_RotorSpeed:
      canonical_id: WROT_rotor_speed
      raw_unit: rpm                     # ✅实证 max 16.2 = rpm (同枫香10min)
      valid_range: [0, 20]
    UNIT.CI_PcsMeasuredGeneratorSpeed: { canonical_id: WGEN_generator_speed, unit: rpm, valid_range: [0, 2000] }
    UNIT.CI_PitchPositionA1:
      canonical_id: WROT_pitch_1
      raw_unit: rad                     # ✅实证 max 1.76 = rad ★★ 异于枫香(度)! 照搬差57× (§1.2 陷阱)
      to_canonical: "*57.2958"
      valid_range_canonical: [-3, 100]
      note: "★ 仅 A1 单叶 (无A2/A3) → 无三叶不平衡; 单位=rad(同阜山, 非枫香度)"
    UNIT.CI_WindSpeed1: { canonical_id: WMET_wind_speed_nacelle, unit: m/s, valid_range: [0, 40], self_ref_risk: true }
    UNIT.CI_WindSpeed2: { canonical_id: WMET_wind_speed_nacelle2, unit: m/s, valid_range: [0, 40], note: "双风速计交叉" }
    UNIT.CI_YawError1:
      canonical_id: WYAW_yaw_error
      raw_unit: rad
      to_canonical: "*57.2958"
      frame: nacelle
      valid_range_canonical: [-180, 180]
      note: "⚠ A03 实测 max 4.71 rad(>π) → 待核 wrap/量程; nacelle-frame 不作地理"
    # ---- 温度 (红阳10min 富: 低速轴+主轴+油槽 枫香10min缺) ----
    UNIT.CI_GearboxInputShaftTemperature: { canonical_id: WGBX_lss_shaft_temp, unit: degC, valid_range: [-20, 90], note: "低速轴(输入轴); 枫香须秒级才有" }
    UNIT.CI_GearboxOilSumpTemperature: { canonical_id: WGBX_oil_temp, unit: degC, valid_range: [-20, 90] }
    UNIT.CI_GearboxOutputShaftTemperature: { canonical_id: WGBX_hss_bearing_temp, unit: degC, valid_range: [-20, 110] }
    UNIT.CI_GeneratorBearingTemperatureA: { canonical_id: WGEN_bearing_de, unit: degC, valid_range: [-20, 100] }
    UNIT.CI_GeneratorBearingTemperatureB: { canonical_id: WGEN_bearing_nde, unit: degC, valid_range: [-20, 100] }
    UNIT.CI_GeneratorWindingTemperatureU1: { canonical_id: WGEN_winding_u, unit: degC, valid_range: [-20, 155], note: "仅U相, 无三相不对称判据" }
    UNIT.CI_MainBearingRotorSideTemperature: { canonical_id: WMBR_main_bearing_temp, unit: degC, valid_range: [-20, 90], note: "主轴叶轮侧; 枫香10min缺" }
    UNIT.CI_NacelleAirTemperature: { canonical_id: WNAC_air_temp, unit: degC, valid_range: [-40, 70] }
    UNIT.CI_OutsideAirTemperature: { canonical_id: WMET_ambient_temp, unit: degC, valid_range: [-40, 55] }
    UNIT.CI_NacellePosition: { canonical_id: WYAW_nacelle_position, frame: "[待验]" }

# ---- 测风雷达 (10-200m) — ✅实证: 仅点表, 未见时序数据 ----
mast:
  status: "[待核] 仅 测风雷达点表.xlsx, 未见雷达时序数据 → 绝对功率曲线大概率 INSUFFICIENT (同枫香mast陷阱); onboard 时确认是否有雷达实测时序"

# ---- 故障 (非 section, 用 _ref 键) ----
fault_codes_ref:
  source: "联合动力SCADA故障列表.xlsx = 码字典(Name/Alarm Level/Reset), 非事件时序"
  caveat: "10min 层无状态/故障码列 → D4/D5 occurrence(Pareto/MTBF) 须另找事件日志或状态列"

cleaning:
  physical:
    - "功率 raw W → /1000 kW; raw>50000 未换算 = BLOCK"
    - "★变桨=rad(本场) → *57.3 得度; 勿套枫香(度)"
    - "对风 rad*57.3; max>π 待核 wrap"
  semantic:
    - "机型/叶轮径待收资表确认后定分机型口径"
traps:
  - "功率=瓦特 (同枫香/阜山)"
  - "★变桨单位: 红阳=rad, 枫香=度 — 同OEM同层不同场单位变, 照搬差57× (§1.2 跨场重验实证)"
  - "仅A1单叶 → 无三叶不平衡; 测风雷达仅点表 → 绝对性能待核"