wind_full_name: 招远风电场-山东-大唐 # 是否是竖表 is_vertical_table: False # 如果是怎配置竖表需要查询的字段 vertical_table_conf: read_cols: - 数据时间 - 资产名称 - 采集点名称 - 数值 index_cols: - 数据时间 - 资产名称 col_key: 采集点名称 col_value: 数值 #时间字段,转化年月日 以及格式化为 yyyy-MM-dd HH:mm:ss使用 time_col: time_stamp # 风机编号字段 wind_col: wind_turbine_number # 表数据和数据文件的映射关系 trans_col: # 风机编号 $file[0:3]获取文件名的前3位 wind_turbine_number: $file[0:3] # 时间戳 time_stamp: Time # 有功功率 active_power: 有功功率 # 风轮转速 rotor_speed: 叶轮转速 # 发电机转速 generator_speed: 发电机转速 # 风速 wind_velocity: 实际风速 # 桨距角1 pitch_angle_blade_1: 桨叶角度A # 桨距角2 pitch_angle_blade_2: 桨叶角度B # 桨距角3 pitch_angle_blade_3: 桨叶角度C # 绝对风向 true_wind_direction: 绝对风向 # 对风角度 yaw_error1: 风向1s # 机舱位置 cabin_position: 机舱位置 # 环境温度 outside_cabin_temperature: 机舱外温度 # 有功功率设定值 set_value_of_active_power: 有功设定反馈 # 齿轮箱油温 gearbox_oil_temperature: 齿轮箱油温度 # 主轴承轴承温度 main_bearing_temperature: 主轴轴承温度 # 齿轮箱高速轴轴承温度 gearbox_high_speed_shaft_bearing_temperature: 齿轮箱高速轴轴承(风轮侧)温度 # 齿轮箱中速轴轴承温度 gearboxmedium_speed_shaftbearing_temperature: null # 齿轮箱低速轴轴承温度 gearbox_low_speed_shaft_bearing_temperature: null # 发电机驱动端轴承温度 generatordrive_end_bearing_temperature: 发电机前轴承温度 # 发电机非驱动端轴承温度 generatornon_drive_end_bearing_temperature: 发电机后轴承温度 # 发电机绕组1温度 generator_winding1_temperature: 发电机定子绕组温度 # 发电机绕组2温度 generator_winding2_temperature: null # 发电机绕组3温度 generator_winding3_temperature: null # 风机状态1 wind_turbine_status: 设备主要状态 # 风机状态2 wind_turbine_status2: null # 机舱内温度 cabin_temperature: 机舱内温度 # 湍流强度 turbulence_intensity: 湍流强度 # 扭缆角度 twisted_cable_angle: 电缆扭角 # 机舱前后振动 front_back_vibration_of_the_cabin: 塔筒前后振动 # 机舱左右振动 side_to_side_vibration_of_the_cabin: 塔筒左右振动 # 实际力矩 actual_torque: 实际力矩 # 给定力矩 given_torque: 给定力矩 # 顺时针偏航次数 clockwise_yaw_count: 顺时针偏航次数 # 逆时针偏航次数 counterclockwise_yaw_count: 逆时针偏航次数 # 不可利用 unusable: 不可利用 # 功率曲线可用 power_curve_available: 功率曲线可用 # 齿轮箱转速 required_gearbox_speed: 齿轮箱转速 # 变频器转速(主控) inverter_speed_master_control: 变频器转速(主控)