energy-data-trans/tmp_file/gradio_web.py

# -*- coding: utf-8 -*-
# @Time    : 2024/6/3
# @Author  : 魏志亮
import copy

import gradio as gr
import yaml

from service.plt_service import get_all_wind_company
from service.trans_service import get_min_sec_conf_test


# from utils.db.trans_mysql import *


def test_click(wind_name, wind_full_name, type, is_vertical_table, merge_columns, vertical_read_cols,
               vertical_index_cols, vertical_col_key, vertical_col_value, resolve_col_prefix, wind_name_exec,
               wind_turbine_number, time_stamp, active_power, rotor_speed, generator_speed, wind_velocity,
               pitch_angle_blade_1, pitch_angle_blade_2, pitch_angle_blade_3, cabin_position, true_wind_direction,
               yaw_error1, set_value_of_active_power, gearbox_oil_temperature, generatordrive_end_bearing_temperature,
               generatornon_drive_end_bearing_temperature, wind_turbine_status, wind_turbine_status2, cabin_temperature,
               twisted_cable_angle, front_back_vibration_of_the_cabin, side_to_side_vibration_of_the_cabin,
               actual_torque, given_torque, clockwise_yaw_count, counterclockwise_yaw_count, unusable,
               power_curve_available, required_gearbox_speed, inverter_speed_master_control, outside_cabin_temperature,
               main_bearing_temperature, gearbox_high_speed_shaft_bearing_temperature,
               gearboxmedium_speed_shaftbearing_temperature, gearbox_low_speed_shaft_bearing_temperature,
               generator_winding1_temperature, generator_winding2_temperature, generator_winding3_temperature,
               turbulence_intensity, param1, param2, param3, param4, param5, param6, param7, param8, param9, param10
               ):
    params = copy.deepcopy(vars())

    error_message = ""
    if wind_name is None or wind_name.strip() == '':
        error_message += "风机名称必选"
        gr.Warning(error_message)
        return error_message

    if wind_full_name is None or wind_full_name.strip() == '':
        error_message += "风机全称必选"
        gr.Warning(error_message)
        return error_message

    # save_to_trans_conf(params)
    return yaml.dump(vars(), allow_unicode=True, sort_keys=False)


def fill_data(wind_name, type):
    select_cols = ['wind_full_name', 'is_vertical_table', 'merge_columns', 'vertical_read_cols',
                   'vertical_index_cols', 'vertical_col_key', 'vertical_col_value', 'resolve_col_prefix',
                   'wind_name_exec',
                   'wind_turbine_number', 'time_stamp', 'active_power', 'rotor_speed', 'generator_speed',
                   'wind_velocity', 'pitch_angle_blade_1', 'pitch_angle_blade_2', 'pitch_angle_blade_3',
                   'cabin_position', 'true_wind_direction', 'yaw_error1', 'set_value_of_active_power',
                   'gearbox_oil_temperature', 'generatordrive_end_bearing_temperature',
                   'generatornon_drive_end_bearing_temperature', 'wind_turbine_status', 'wind_turbine_status2',
                   'cabin_temperature', 'twisted_cable_angle', 'front_back_vibration_of_the_cabin',
                   'side_to_side_vibration_of_the_cabin', 'actual_torque', 'given_torque', 'clockwise_yaw_count',
                   'counterclockwise_yaw_count', 'unusable', 'power_curve_available', 'required_gearbox_speed',
                   'inverter_speed_master_control', 'outside_cabin_temperature', 'main_bearing_temperature',
                   'gearbox_high_speed_shaft_bearing_temperature', 'gearboxmedium_speed_shaftbearing_temperature',
                   'gearbox_low_speed_shaft_bearing_temperature', 'generator_winding1_temperature',
                   'generator_winding2_temperature', 'generator_winding3_temperature', 'turbulence_intensity', 'param1',
                   'param2', 'param3', 'param4', 'param5', 'param6', 'param7', 'param8', 'param9', 'param10']
    print(wind_name, type)
    df = get_min_sec_conf_test(wind_name, type)
    print(df)
    if df.keys() == 0:
        return [''] * len(select_cols)
    result = []
    for col in select_cols:
        result.append(df[col])
    return result[0], result[1], result[2], result[3], result[4], result[5], result[6], result[7], \
        result[8], result[9], \
        result[10], result[11], result[12], result[13], result[14], result[15], result[16], result[17], result[18], \
        result[19], result[20], result[21], result[22], result[23], result[24], result[25], result[26], result[27], \
        result[28], result[29], result[30], result[31], result[32], result[33], result[34], result[35], result[36], \
        result[37], result[38], result[39], result[40], result[41], result[42], result[43], result[44], result[45], \
        result[46], result[47], result[48], result[49], result[50], result[51], result[52], result[53], result[54], \
        result[55], result[56], result[57]


with gr.Blocks(css=".container.svelte-1sk0pyu.svelte-1sk0pyu {width: 300px}", title='中能智能') as demo:
    wind_name = gr.Dropdown(label="电场名称", choices=get_all_wind_company())

    types = {
        '分钟映射': 'minute', '秒映射': 'second'
    }

    for name in types.keys():
        with gr.Tab(label=name):
            type = gr.Text(label="映射类型", value=types[name], visible=False)
            wind_full_name = gr.Textbox(label="完整的电场名称")
            merge_columns = gr.Checkbox(label="是否需合并(多个excel列合并成一个才需要选择)", value=False)
            is_vertical_table = gr.Checkbox(label="是否是竖表", value=False)
            vertical_read_cols = gr.Textbox(label="竖表--读取的字段", placeholder="逗号分隔")
            vertical_index_cols = gr.Textbox(label="竖表--分组的字段", placeholder="逗号分隔,一般都是时间,机组")
            vertical_col_key = gr.Textbox(label="竖表--数据点字段")
            vertical_col_value = gr.Textbox(label="竖表--数据点数值")
            resolve_col_prefix = gr.Textbox(label="处理列名",
                                            placeholder="比如重庆海装 25_#桨距角,只需要 桨距角 可以用 column[column.find('#')+1:]")

            wind_name_exec = gr.Textbox(label="风机编号代码处理",
                                        placeholder="比如 昌平001号风机,可以配置 wind_name.replace('昌平','').replace('号风机','')")

            wind_turbine_number = gr.Textbox(label="风机编号(wind_turbine_number)")
            time_stamp = gr.Textbox(label="时间戳(time_stamp)")
            active_power = gr.Textbox(label="有功功率(active_power)")
            rotor_speed = gr.Textbox(label="风轮转速(rotor_speed)")
            generator_speed = gr.Textbox(label="发电机转速(generator_speed)")
            wind_velocity = gr.Textbox(label="风速(wind_velocity)")
            pitch_angle_blade_1 = gr.Textbox(label="桨距角1(pitch_angle_blade_1)")
            pitch_angle_blade_2 = gr.Textbox(label="桨距角2(pitch_angle_blade_2)")
            pitch_angle_blade_3 = gr.Textbox(label="桨距角3(pitch_angle_blade_3)")
            cabin_position = gr.Textbox(label="机舱位置(cabin_position)")
            true_wind_direction = gr.Textbox(label="绝对风向(true_wind_direction)")
            yaw_error1 = gr.Textbox(label="对风角度(yaw_error1)")
            set_value_of_active_power = gr.Textbox(label="有功功率设定值(set_value_of_active_power)")
            gearbox_oil_temperature = gr.Textbox(label="齿轮箱油温(gearbox_oil_temperature)")
            generatordrive_end_bearing_temperature = gr.Textbox(
                label="发电机驱动端轴承温度(generatordrive_end_bearing_temperature)")
            generatornon_drive_end_bearing_temperature = gr.Textbox(
                label="发电机非驱动端轴承温度(generatornon_drive_end_bearing_temperature)")
            wind_turbine_status = gr.Textbox(label="风机状态1(wind_turbine_status)")
            wind_turbine_status2 = gr.Textbox(label="风机状态2(wind_turbine_status2)")
            cabin_temperature = gr.Textbox(label="机舱内温度(cabin_temperature)")
            twisted_cable_angle = gr.Textbox(label="扭缆角度(twisted_cable_angle)")
            front_back_vibration_of_the_cabin = gr.Textbox(label="机舱前后振动(front_back_vibration_of_the_cabin)")
            side_to_side_vibration_of_the_cabin = gr.Textbox(label="机舱左右振动(side_to_side_vibration_of_the_cabin)")
            actual_torque = gr.Textbox(label="实际力矩(actual_torque)")
            given_torque = gr.Textbox(label="给定力矩(given_torque)")
            clockwise_yaw_count = gr.Textbox(label="顺时针偏航次数(clockwise_yaw_count)")
            counterclockwise_yaw_count = gr.Textbox(label="逆时针偏航次数(counterclockwise_yaw_count)")
            unusable = gr.Textbox(label="不可利用(unusable)")
            power_curve_available = gr.Textbox(label="功率曲线可用(power_curve_available)")
            required_gearbox_speed = gr.Textbox(label="齿轮箱转速(required_gearbox_speed)")
            inverter_speed_master_control = gr.Textbox(label="变频器转速(主控)(inverter_speed_master_control)")
            outside_cabin_temperature = gr.Textbox(label="环境温度(outside_cabin_temperature)")
            main_bearing_temperature = gr.Textbox(label="主轴承轴承温度(main_bearing_temperature)")
            gearbox_high_speed_shaft_bearing_temperature = gr.Textbox(
                label="齿轮箱高速轴轴承温度(gearbox_high_speed_shaft_bearing_temperature)")
            gearboxmedium_speed_shaftbearing_temperature = gr.Textbox(
                label="齿轮箱中速轴轴承温度(gearboxmedium_speed_shaftbearing_temperature)")
            gearbox_low_speed_shaft_bearing_temperature = gr.Textbox(
                label="齿轮箱低速轴轴承温度(gearbox_low_speed_shaft_bearing_temperature)")
            generator_winding1_temperature = gr.Textbox(label="发电机绕组1温度(generator_winding1_temperature)")
            generator_winding2_temperature = gr.Textbox(label="发电机绕组2温度(generator_winding2_temperature)")
            generator_winding3_temperature = gr.Textbox(label="发电机绕组3温度(generator_winding3_temperature)")
            turbulence_intensity = gr.Textbox(label="湍流强度(turbulence_intensity)")
            param1 = gr.Textbox(label="齿轮箱油压(param1)")
            param2 = gr.Textbox(label="预留字段2(param2)")
            param3 = gr.Textbox(label="预留字段3(param3)")
            param4 = gr.Textbox(label="预留字段4(param4)")
            param5 = gr.Textbox(label="预留字段5(param5)")
            param6 = gr.Textbox(label="预留字段6(param6)")
            param7 = gr.Textbox(label="预留字段7(param7)")
            param8 = gr.Textbox(label="预留字段8(param8)")
            param9 = gr.Textbox(label="预留字段9(param9)")
            param10 = gr.Textbox(label="预留字段10(param10)")

            button = gr.Button(value="提交")
            result = gr.Textbox(label="结果")

            button.click(fn=test_click,
                         inputs=[wind_name, wind_full_name, type, is_vertical_table, merge_columns, vertical_read_cols,
                                 vertical_index_cols, vertical_col_key, vertical_col_value, resolve_col_prefix,
                                 wind_name_exec, wind_turbine_number, time_stamp, active_power, rotor_speed,
                                 generator_speed, wind_velocity, pitch_angle_blade_1, pitch_angle_blade_2,
                                 pitch_angle_blade_3, cabin_position, true_wind_direction, yaw_error1,
                                 set_value_of_active_power, gearbox_oil_temperature,
                                 generatordrive_end_bearing_temperature, generatornon_drive_end_bearing_temperature,
                                 wind_turbine_status, wind_turbine_status2, cabin_temperature, twisted_cable_angle,
                                 front_back_vibration_of_the_cabin, side_to_side_vibration_of_the_cabin, actual_torque,
                                 given_torque, clockwise_yaw_count, counterclockwise_yaw_count, unusable,
                                 power_curve_available, required_gearbox_speed, inverter_speed_master_control,
                                 outside_cabin_temperature, main_bearing_temperature,
                                 gearbox_high_speed_shaft_bearing_temperature,
                                 gearboxmedium_speed_shaftbearing_temperature,
                                 gearbox_low_speed_shaft_bearing_temperature, generator_winding1_temperature,
                                 generator_winding2_temperature, generator_winding3_temperature, turbulence_intensity,
                                 param1, param2, param3, param4, param5, param6, param7, param8, param9, param10
                                 ], outputs=[result])
            wind_name.change(fill_data, inputs=[wind_name, type],
                             outputs=[wind_full_name, is_vertical_table, merge_columns, vertical_read_cols,
                                      vertical_index_cols, vertical_col_key, vertical_col_value, resolve_col_prefix,
                                      wind_name_exec, wind_turbine_number, time_stamp, active_power, rotor_speed,
                                      generator_speed, wind_velocity, pitch_angle_blade_1, pitch_angle_blade_2,
                                      pitch_angle_blade_3, cabin_position, true_wind_direction, yaw_error1,
                                      set_value_of_active_power, gearbox_oil_temperature,
                                      generatordrive_end_bearing_temperature,
                                      generatornon_drive_end_bearing_temperature,
                                      wind_turbine_status, wind_turbine_status2, cabin_temperature, twisted_cable_angle,
                                      front_back_vibration_of_the_cabin, side_to_side_vibration_of_the_cabin,
                                      actual_torque,
                                      given_torque, clockwise_yaw_count, counterclockwise_yaw_count, unusable,
                                      power_curve_available, required_gearbox_speed, inverter_speed_master_control,
                                      outside_cabin_temperature, main_bearing_temperature,
                                      gearbox_high_speed_shaft_bearing_temperature,
                                      gearboxmedium_speed_shaftbearing_temperature,
                                      gearbox_low_speed_shaft_bearing_temperature, generator_winding1_temperature,
                                      generator_winding2_temperature, generator_winding3_temperature,
                                      turbulence_intensity,
                                      param1, param2, param3, param4, param5, param6, param7, param8, param9, param10])

if __name__ == "__main__":
    demo.launch(server_name='0.0.0.0', server_port=7860, auth=('znzn', "znzn123"))